Tinymight 2 Purple Heart Is Here!!

[@AlessaBurns]

I got the TM2 for my birthday this year, it's beautiful and works so well! Love the standard stem to adjust the bowl size and the balls stem for dosing capsules. I vape lavender, mint and hibiscus.

[@edwardemery2092]

Just ordered a Tinymight 2 Purple Heart from your website love your videos great energy ❤️

[@fd35g3]

Ed's TNT sells Titanium and glass Mighty dosing caps. They fit perfectly in the TM and yes, it does warm and cool faster, with longer herb extraction. The glass dosing caps adds heavy conduction element. I drop a Titanium dosing cap in and an Arizer mesh filter filled with herb into the 10mm stem. (they don't always fit the 10mm stems, so buy extras.) Very little air restrictions, can kill 2 bowls in 1 sesh. Love the versatility and aftermarket for this S & B killer.

[@Temmple]

$433 here in the US = a HUGE nope!

[@dcpunisher4781]

Get a haircut, get a real job and stop being a poor crybaby.

[@Geefiasco]

Mine arrived a few days ago and it is stunning in person. The TM2 in general is the best around, you’ll never understand unless you actually own one. The quality is unbelievable and feels so substantial when holding it, a real engineering masterpiece with the performance to match. Can you imagine what the TM3 will be like 😮

[@soulja617]

Do you have to stir the bowls with the TM2 to achieve an even roast?

[@Geefiasco]

@@soulja617 Not really, I sometimes give my last draw a little stir to really get the most out of it, but it’s not really needed, just my OCD 🤣

[@georgevapefiend]

Perfectly put

[@TheYuccaPlant]

@@Geefiasco How do you stir it without getting leftovers inside the machine after putting it back? i don't own one yet but i'm really curious about this, it seems like the stir would ruin the compactness

[@Geefiasco]

@@TheYuccaPlant After stirring using the stir tool on the TM2, flip the tool upside down and tamp it down slightly to avoid the weed crumbs falling out.

[@space.youtube]

I love these videos. Great t shirt too.

[@georgevapefiend]

Thanks for watching, George's t-shirt selection is pretty cool! This one has to be my fav

[@danielsutcliffe9688]

Hi there, love the info in your video's! Can the tinymight hold up to the vapexhale evo cloud?

[@superdave7507]

was really trying to upgrade to that wood on my RMA, but sadly something they dont do over there. however, they did make the internals the same as the purple heart. i keep my leather sleeve on the device 24/7 anyways. :P

[@joejohnson691]

Guys, I have a question re the TM2 I purchased Nov 2023. Have you ever experienced poor vape performance when the normal things like (clean heating unit, new batteries, new charger, new screen ) are not the issue yet little to no clouds? It can take 2-3 bowls before it seems to make a little difference, not the case when new and several months thereafter....it performed like a champ...all that you've said about it was spot on until it wasn't. Any ideas, suggestions? Also tried calibrating the heating range as instructed by the seller which did work but temporarily Thanks

[@Smurfis]

I have one as well and wish I’d just of bought a volcano

[@90sIndieGrungeScene]

Just bought this and awaiting delivery. Can't wait!

[@gildapianelli2937]

Mine arrived a week ago or so and it is just super gorgeous. I love TM...it is extraordinary. Is it worth the money? YES! Indeed it is. Why? It is so special, and it is so gorgeous...and its TM...top of the line. I personally love it.

[@gildapianelli2937]

Always great to see you both...thank you for the video.

[@aiguljjuan3009]

Are you saying this about every vape that you have? I've heard it about mighty+,TM,venty,avlp.... What's next?😅😅😅😅😅😅

[@orsolyaszervatiusz7616]

Hi, just a question. Do you smoke the same amount of green with it or more? In the video they put quiet a lot if stuff in the container.

[@Vic-yc3qu]

Thanks Guys. According to their website: they replaced the glass cylinder (surrounds the stem) that was cracking often when the unit was dropped. The ceramic is just for durability. The support rods in the heater are also upgraded to be 2x strength. TM2 used to come with a titanium stem, which has been swapped out for titanium dosing cap and the new glass bead stem. The oven performance hasn’t changed. You’re likely experiencing a different hit due to the new stem (different airflow).

[@tonyfanfarone]

Sounds like a good move. Fragility was a concern I had with the devices internals.

[@ZackSilver77]

Hownwpuld you say the flavor is without using any titanium

[@drneisi6171]

Ordered full package!

[@MrJWINER]

Upgraded heater support rods, updated heater sleeve, even updated heater, plus the accessories and different wood

[@georgevapefiend]

welcome

[@twsclair]

690 AUD. Worth every cent

[@Phero18eighty]

I find the S&B dosing caps work really well in this device, I know they don't fit in the stem. I just prefer the wider surface area. The extra heat really kicks out the vapour production, its the only device to replace my Anvil.

[@HedRokkaZ]

Looks pretty, hits hard. I'd love to see a few one off pieces in some crazy burls. Imagine if the TM3 had interchangeable wooden shells so you could swap the look up with different types... that would be sweet and would open up some cool customisation options.

[@baitandswitch]

George ive got an old rarely used Splinter Z by RBT, any idea where I can sell this?

[@unifromhokkaido]

This device gets so many updates! Thanks for the tip btw. I was about to buy a wpa. Having frosted glass would still be good imo.

[@georgevapefiend]

Thanks for watching

[@korill125]

I was looking forward to this so much! Great video as always guys

[@Levett208]

I have just brought this from your website… lets see if i have made the right choice by not going back to S&B 👍🏻

[@tenn46]

It’s the Leica of dry herb vapes.

[@TomAnch-e6o]

Hello, is the flavor better than the original tm2? thx :)

[@Hamjefe]

I just bought the updated walnut TM2 on 4/20!

[@digitalamok3453]

😂yeah that's life

[@AKMilli-sn4nx]

You got it for a great price and still have identical performance pretty much so don’t fret.

[@terpsupreme]

So the heater is zirc instead of glass, or is another part that is zirconia? If it's the heater, then that alone would be a worthwhile upgrade imo.

[@13guns87]

I want a TM2 but the reliability issues and the power button issues are putting me off tbh. I'll probably still get one but such issues means i gotta buy new. I often like used for its lack of competition on ebay. You can find almost new, people move on quickly with vapes. Got an offer on one. Been used once. He has no need to lie, it doesn't increase its value. Used is used, be that once or 1000 times.

[@toromothy]

it's beautiful

[@georgevapefiend]

Yes!

[@genoleso2035]

I have got a tm2(first relase). A part from wood colour and power switch button that is surely improve what would change in this news vape? Sorry for my english

[@georgevapefiend]

Apart from the wood colour and the button reinforcement, you get the zirconia heater upgrade and the 15 balls stem comes with it!

[@genoleso2035]

@@georgevapefiend + the SS liner?

[@georgevapefiend]

@@genoleso2035 yes exactly :D

[@ZackSilver77]

What wristwatch are you wearing?

[@MrJWINER]

Please never stop making videos

[@georgevapefiend]

Thanks for watching! Weekly video for a strong year now and the'll keep coming :)

[@Temmple]

Between the Solo 3 and this what has better airflow?

[@georgevapefiend]

TM2

[@TheGardener54uk]

try a mighty + with some proper flos lol

[@pinopadayao7322]

You guys are horrible for showing this! lol I love my TM2 but that model is really nice. That would be a great addition

[@georgevapefiend]

Thanks for watching!

[@YaYa-ex8cu]

Solo 3 for $270 or the TM for $400+

[@WiLlZyZz777]

I'm in the same boat almost pulled the trigger on the solo 3 but am now leaning in the other direction boutta ball out and go for the purple heart tm2 - coming from a current dynavap user

[@WiLlZyZz777]

I did indeed ball out and man this purple heart tinymight 2 is beautiful and rips the hardest out of any vape I've hit. Takes a slight learning curve on how hard you gotta draw to get an optimal hit since that affects how the convection works

[@jcin9129]

💜

[@MrHebert36]

Interesting 🤔

[@Browz1]

I can taste the wood in the TM1 and TM2, I wonder if I'd have the same problem with this🤔

[@counthenny9160]

My 2nd venty is still smacking, thanks boys

[@georgevapefiend]

Awesome! Thanks for watching

[@acaryuzz]

Hey guys, nice video. however, the ballstem is very difficult to clean, small plant parts get through and it looks unappetizing very quickly. i am somewhat a little disappointed with the new stem

[@georgevapefiend]

It's so easy to clean! DC Clear, heat it up in a container in the microwave for 2min - take it out and then put the stem - 5 minutes and it will be fully clean :)

[@Kelbayram]

Its easy to clean all you need is some iso and few minutes

[@smacksalad]

Are you using a screen with the stem or just relying on the holes in the glass? Add a screen!

[@joededa5383]

I want to see a leopardwood TM ❤️