Why?? This grinder is so popular on Amazon.com

[@renhoek1967]

I purchased this grinder a few years ago. I love the hell out of it. Works great even after years of use. A+

[@Haze763]

That's great news man. I bought mine around 2022. It's awesome and all the grinder I need. I don't need anything fancy. Happy grinding!!

[@Eroticfishtoy]

how well does it grind, i have a cheapo grinder from wish that works alright but bud always gets stuck in and between the teeth and bud keeps on going into the kief tray

[@hadjiulf]

put the grinder in the freezer before grinding gives you a lot more crystalls in the bottom

[@tophernuttle420]

10 bbs and a few shakes gets it all💯💯

[@sac5608]

yeah you're right but i like to keep them on the flower to smoke

[@johnsiedlewicz5669]

That means less crystals in the flower ☹️

[@hadjiulf]

@@johnsiedlewicz5669 yes it does, but also it´s nice to just enjoy the crystals sometimes.

[@le_cornishon]

I used to keep my shake leaf and stalk freeze it in a tub then shake.

[@OleensEmbroidery]

When it gets all gummed up, can you put it in the dishwasher?

[@BluedMarble]

Had mine for 7 years. Works great, have it in green.

[@scottfree6479]

I have a ~20 year old space case with no weird colored nonsense, a stronger magnet than anything I've ever seen, and teeth which are still sharp enough to cut. Most of these modern grinders are just cheap in comparison.

[@hueman9]

Name brand?

[@scottfree6479]

@@hueman9 I presume so; no reason to believe it's a knock off.

[@troysapp9668]

Yup ill keep my "cali crusher" as well😊

[@christopherjunkins]

People just don't take pride in their work anymore. Does it look good and operate ok? SELL IT! MARK THAT SHIT UP TOO!!

[@denjodope8576]

Mine also is around 15 yrs old. ❤

[@tonyhancock4258]

That little bag is smell proof. I've got a similar grinder and came with those two little weeds bags. I tested them. They're smell proof. Really good.

[@87Rado]

I thought the same when I purchased mine from ebay, I hated the logo, in fact I almost ground it off, but I didn't buy it for it's looks, I bought it for the quality! They have really good reviews. Had it several years now, and it's still as good as the day I got it. And since it was used it was only $11, of course it needed to be cleaned before I used it.

[@wiremuporter5044]

Pretty standard setup Plenty of them at the $2 shop Might not be that brand but just as solid, durable and immortal if maintained properly

[@thomasgentry6201]

Ya this Nerd is Clueless! Stuff goes in bottom? WTF Hey Nerd put a Nickle in with weed grinding get more Stuff!

[@christopherjunkins]

You know if aluminum costs between 10 and 15 bucks for a 1 foot round of 3" stock at the manufacturer, add on a couple bucks for overhead so say you have a 10 dollar amount of aluminum, 1 dollar overhead (producing this aluminum doesn't take long at all ;) ), and 4 dollars of profit to be generous, you have 15 bucks worth of material. Then you get this in the shop you work at. They have a VERY fast CNC machine. After a few minutes of setup, and locking things down into an already setup and preprogrammed machine, you can bang out these 4 pieces in minutes. Add that overhead and such costs and now that 15 dollar round stock costs maybe 20 bucks. All so it gets cut into 4 pieces at an automatic saw, and then CNC machined to be cleaned up and shaped. Then this company takes that 20 buck grinder and sells it with a mass of others and gets the discount down to say 16 dollars per grinder. Then the store gets ahold of it and puts their markup on it and you get say... 5 dollars, now that 10 dollars of material now costs 25 bucks, marked down for them to 16... god help you if they stored it in wearhousing on the store side... that costs so that gets added to the cost. However it's only 25 bucks for a 3" 4 piece grinder right with a final markup. Now everyone is making an ok profit margin so to speak per unit and you have stock of 3" 4 piece grinders right? Wrong, because the company that CNC'ed that, won't sell it for that little. Their company name means at least an additional $275 in name alone. That 25 buck grinder now costs 300 bucks. Now, say you didn't care about brand name, well keep selling 16 dollar grinders for 20-25 bucks and you'll be raking in the money... not as much as that high end brand, but amazon helps you sell it. So here's my question: Why is there such a vast difference if NAME OF BRAND is THE. ONLY. DIFFERENCE. PERIOD. Both get metal shavings usually, both have paint added somewhere for .01 cost... Just one sais Kozo and the other says Cookies x whoever.... Is it really worth the price for the exact same thing? Well people with more money than sense... will buy the higher priced ones because "higher cost means better quality"... yea right. Not always. And the ones who truely take pride in their work and want people to buy it will make a much more reasonable offer for something closer to 50 bucks or so... but do you see this in the cannabis accessory space? HA! NO!!

[@renhoek1967]

I purchased this grinder a few years ago. I love the hell out of it. Works great even after years of use. A+ I've seen the cheap ones and they suk

[@Gelunix]

Every grinder is see recommended is like $80+. 2.5in for $20 is amazing. Good looking

[@elijahzink1781]

I have the same grinder. It's the best. 2018 bought still going strong

[@MysticalGardens]

I have had this exact grinder for over 5 years! I soak it in 91% isopropyl and scrub it with a toothbrush to clean it.

[@davidpaylor5666]

Same but I just put mine through the dishwasher when it gets sticky.

[@ChazzleDazzleVideos]

I have a jar of everclear(95% grain alcohol) that I just pop my grinder in like once a week or so and once a month or when it gets dark enough I evap it and decarb for some good rso. I grind like 10-15g a day in it though so it gets gunked up fast.

[@davidpaylor5666]

@@ChazzleDazzleVideos Waste not, want not.

[@ChazzleDazzleVideos]

@@davidpaylor5666 very true I grow my own and all the extra trimmings and stuff are used for edibles or hash. I once hashed a whole plant that hermed and disliked the hash but 6 months later when I ran out until my harvest had finished curing and that 23g of hash helped me survive the week I was still waiting when I ran out of my previous harvest.

[@Haze763]

I've had mine for a few years. Love it!! I need to give it a good alcohol cleaning.

[@nf4866]

I got one of these and I'm really happy with it. The only problem is I accidentally got a smaller size so I don't have the keif catcher.

[@joruscbaoth1192]

Been using them for years. Don't press down hard on it while using and that silicone ring on it will last twice as long.

[@Eroticfishtoy]

thanks boss, ill make sure to keep that in mind. can you pack it pretty tight or do you gotta go more light because of the ring

[@DooplisTheGhost]

They basically stole the Viking Axe grinder design and slapped their own logo on it.

[@jason_paulin]

There are at least 5 different “brands” selling the exact same grinder all just rebranded with different names. Don’t think ‘Viking Axe Grinders’ are very different. They make like 5 different grinders and half of them are carbon copies of other grinders that have been on the market for years.

[@DooplisTheGhost]

@@jason_paulin I apologize if Viking doesn't really own the design, I'm new to the herb grinder scene and Viking is basically the only one I became familiar with and thought was wide spread.

[@Mykeyharp]

Had it now for about ten years . Great, especially with the screen pan at the bottom. It's made of air craft metal... It'll out last me...

[@conqueringlion420]

Just wait till it gums up with thc, you need 2 giant pipe wrenches just to get it unlocked

[@chadashley1434]

I have a 4" version, if you have large hands, I highly recommend it!

[@mackmane6529]

I’ve had mine for couple years now she’s about done but worth the money

[@nickrule9904]

Looks good from here swear by my space case personally I've had it a couple of decades!!

[@alansmith9948]

I need a way to get even tiny stems out, kills my lungs if I don't pick it apart, then grind, then pick more little stem pieces out pre- bowl lol

[@OGNUGZZ]

for a few first seconds i thought this man was psychedsubstance

[@Manjarow]

I use the electric ones it doesnt get all stuck

[@SaisukeMutsu]

Apparently, nowdays it's a toss if it comes with the keif catcher or not. some reviews without screen, some with.

[@BoleDaPole]

The paint eventually chips off , don't get a painted one.

[@ahoier]

Yep .....I went with @zamgrinders stainless steel grinder.....it's not as "fluffy" as my Santa Cruz shredder "hemp" grinder.

[@mezenman]

I don’t believe it’s painted. It’s some fancy ‘a’ word I believe. Mine is gold. After years of hard work it’s still gold. Zero wear.

[@Miyamoto-Rain]

was gonna buy this than i just got a grinder tray bundle for like 6 bux instead. i didn't wanna have to look at that logo all the damn time.

[@hermestrismegistus3962]

If it just had the shield logo it would be better. And yeah I don't love the logo, but damn that looks nice

[@Spyderfarmman]

Its not real aluminum and will make metal shavings go with your grinded material. Price point is on what some shops would charge tho

[@bra1nc417d]

The major problem with ALL of these grinder videos, is that, they all show you how "smooth" it is, when its brand new............Well, fucking DUH.............$10 or $1000, brand new, is the smoothest it will ever be, period.

[@DabsnDeathcore]

I had one, lasted about 3 months and fell apart.

[@ruco1a]

Stainless Steel only for me. Got sick of the Aluminium shavings.

[@60westpro]

I’ve had thins grinder for years and its just mid - dont get gasses up -

[@arthurvanloon482]

😂😂😂😂😂😂😂bruhhhhh nahhhh I’m not rolling using that not deep enough

[@nzovejunethegrayhollow1997]

I can confirm this grinder is good. I've had it for 3 years now and it is still grinding very well, I only had to clean it twice. But mine has the design of a stickman "grinding" on the word it😂 (Like if you get the joke).

[@bbwwe17]

Those are garbage China grinders with someone’s logo on them , you can get them blank from a smoke shop for 10-20$

[@haydenkelliher2859]

It's a grove bag?

[@tavonfenwick-yb5xv]

What's wrong with the logo???

[@richardblais7445]

35 $ !!! Thats a little pricy...

[@CozyCastleCannabisReviews]

Interesting. I have a Space Case and a Flower Mill. Never heard of KOZO but I am intrigued after watching your video!

[@thomasgentry6201]

Tiny Stuff Goes? Dude you need to look to ? Stop pretending!

[@ahoier]

Lol we kbkw what he's talking about lol 😆 he's not trying to get demonetized

[@CoreyMason-r8g]

Great ❗ video 🔥💯😎👍

[@solo_dolo8184]

Junk mine sucks

[@rickybell2.056]

It exactly the same as my chongz , it's so nice to use , it's an enjoyable experience just touching it 😂😊

[@Grumpah]

I got that one but with a bigger chamber and windows. It's SHIT!!! The teeth are not accurate/efficient. The one I have is made of aluminum, I've had shavings in the herb. Perhaps the little one is better but the one I have is SHIT!!!

[@001wizeman]

Not a mention of the grind quality. Pointless video

[@mezenman]

I have had this one for 3 years. It works great. Grind is perfect. I don’t know what more you could ask for in a grinder.

[@BackedCookie]

Haha i smell bs. You probably tryin to oversell a product here that u are affiliated with. That grinder is average at best. Absolute base structure with stupid added weight for "grip", the filter is way to wide. Should be close to 64 mycron. Yours looks like it could be ruled in millimeters. Also that color will come off im pretty sure. That matt finish tells me that this is just painted. Have fun smoking paint.

[@mezenman]

Clearly you’re not familiar with this grinder.

[@BackedCookie]

@mezenman clearly you dont get how hash is made.

[@mezenman]

I’m familiar with the many different ways one can make hash. What I can’t figure out is what you’re talking about. What does this grinder have to do with hash?

[@BackedCookie]

@@mezenman What do u think the sieve in the lower part of the damn grinder is for? And the way its builds, its just way way WAAYYYYY to wide. But whatever. Every fucking generic grinder from kiosks where i live is like this grinder shown here. There is absolutely nothing special about this. Just some mofo online tryin to ripp off ppl. Now plz, talk to somebody else, or buy this overpriced trash and be happy.

[@mezenman]

@baked Are you American? The stuff in the bottom I call kief. I sprinkle it on top of a bowl when I want an extra kick. I would never use this product for making hash, or what I would consider hash. Not the right tool for that. I also already own this product and enjoy it. Matter of fact I’m putting a big spoon of kief on a bowl know.

[@howlinhauler]

nobody that has used a magnet fit grinder would buy this.

[@jamesr2622]

What do you mean by "magnet fit". The kozo grinders are as magnetic as any other grinder. I don't know if that's what you mean by using the term "magnet fit". This grinder has the standard magnet in the middle of the lid. I googled "magnet fit grinder" and it returned nothing relavent so, I cannot say I have any idea what you're talking about. Nor can I say that you know what you're talking abou either.

[@jamesr2622]

What is "magnet fit grinder"? www.google.com/search?q=magnet+fit+grinder&rlz=1C1QCTP_enUS1110US1110&oq=&gs_lcrp=EgZjaHJvbWUqCQgAEEUYOxjCAzIJCAAQRRg7GMIDMgkIARBFGDsYwgMyCQgCEEUYOxjCAzIJCAMQRRg7GMIDMgkIBBBFGDsYwgMyCQgFEEUYOxjCAzIJCAYQRRg7GMIDMgkIBxBFGDsYwgPSAQkxNzY0ajBqMTWoAgiwAgE&sourceid=chrome&ie=UTF-8

[@keithnewton5508]

@@jamesr2622 The reference might be about grinders that use a ring magnet on the outside so there isn't a post in the middle and this makes them easier to fill. Search threadless grinders. Just my guess.

[@mackmane6529]

I’ve had mine for couple years now she’s about done but worth the money