Love my black wheels and this is informative and knowledgeable.Thanks for this video ✊
@autofanaticcars5 жыл бұрын
thanks for checking it out
@tomnape285 жыл бұрын
I got a Mr clean duster for 5 bucks at big lots that is exactly like the wooly wormit. Been cleaning my rims and barrel for 2 years with it. Bought 3 more for backup
@EastLosPyro5 жыл бұрын
What is the easiest and most efficient way to clean perforated leather seats??. I found a few videos but they all just really wipe clean seats. I would like a few tips on how to clean dirty/filthy seats with clogged holes, etc. Thanks!.
@Toxik_Hellcat5 жыл бұрын
How did u modify the woolywormit
@autofanaticcars5 жыл бұрын
was not easy il tell you that
@vqh5 жыл бұрын
You can also dry the wheels using a leaf blower...and if the wheels are waxed or coated it'll make the job even easier.
@jesusisoursavior26823 ай бұрын
is the black rim is prone in scratches
@autofanaticcars3 ай бұрын
Yes just like a black car
@trentblack74875 жыл бұрын
I like your use of the file handle on the wormit
@autofanaticcars5 жыл бұрын
yes from my shop but it was a PITA to cast it to the brush because of the tang being so small but i made it work with some reengineering of the brush body
@trentblack74875 жыл бұрын
@@autofanaticcars Gotcha, the one that comes with it looks silly....
@trentblack74875 жыл бұрын
@@autofanaticcars I do like the looks of the wormit. I'm a Design Engineer and have access to a 3d printer i could probably print out a handle. i sent you an email to your yahoo account, i printed a holder for my MTM foam cannon, thing is always falling over.....
@enynite5 жыл бұрын
Think you’ll sell modded Wooly Wormit brushes on your site?
@autofanaticcars5 жыл бұрын
most likely yes once i come up with a few more ways to do them and see what makes the most sense.
@genysmenrunner16775 жыл бұрын
Auto Fanatic I would love to buy that and the wheel woolie with the handle!
@cataca91 Жыл бұрын
at this point if you really wanna thoroughly clean your wheels, just take em off that would be quicker
@youngblood23rb5 жыл бұрын
Nylon brushes such as the speed master brush will scratch matte or gloss black wheels no doubt, and no one ever talks about it
@umarmoh22035 жыл бұрын
13 minutes of talking about brushes and not a single wheel was cleaned. a little montage or a 2 minute clip would have been good to break up the video a little.
@autofanaticcars5 жыл бұрын
plenty of wheel cleaning videos on my channel this was to discuss some ways to dry and ensure proper flawless finishes and show the modified tools i use and ones i do not suggest using.
@65sohc5 жыл бұрын
I pressure rinse my wheels with deionized water and blow them dry with Air Force blower: done.
@akafish71355 жыл бұрын
Great video. I have to get that Wollywormit. It will be perfect for my track package wheels
@autofanaticcars5 жыл бұрын
smartest brush to come along in a while, just modify it with a handle and enjoy
@smoker39984 жыл бұрын
@@autofanaticcars Where do we buy the blue handle you used to modify the WollyWormit?
@goldzzz145 жыл бұрын
Any tips for protecting a new set of powder coated wheels? I'm planning on getting a set of vorsteiner vff 107's for my summer wheels and having them powder coated. I'm in Washington and drive 600-700 miles a week in mixed traffic, so they'll see plenty of brake dust & road grime.
@autofanaticcars5 жыл бұрын
you can apply a coating to the wheels from Gyeo or C quartz to help
@christiana.145 жыл бұрын
How do you clean the inner fender wells?
@gunsmokezz5 жыл бұрын
I need a new brush,my ez detail brush is a bit annoying. But it does fit, in between the big brakes and drum. What do you recommend?
@autofanaticcars5 жыл бұрын
get the woolly wormit brush
@KenseisGarage5 жыл бұрын
Awesome, will look at the wormitt, great video AF, 👍
@shadowcreekacres5 жыл бұрын
Great vid on black wheels. What's your opinion on black cars? I'm about to buy a 2017 GT350 in either magnetic gray or black.
@autofanaticcars5 жыл бұрын
i like black cars but most OEM paint on black cars is horrible these days it depends how much of a "Fanatic" you are with this stuff.
@65sohc5 жыл бұрын
I have a black GT350 and my son has a Magnetic. The car looks great in either color. Mine underwent 6 hours of paint correction followed by Modesta coating. After three years it looks better than new.
@erricac18805 жыл бұрын
I just bought my BMW 430i and want to keep my wheels in prestine condition. I am interested in the woollywormit but prefer one with a handle. How do I either purchase one from you or how do I add one to my future woolly?
@autofanaticcars5 жыл бұрын
Hi i made 30 of these a while back it is just too much fabrication work to keep doing them. you should pick up the brush and try it as it comes, adding a handle is not that easy
@cbruno121805 жыл бұрын
hey af whats up man i just bought ur wheel foam and 007 gloss shine also ik9 foamer i gotta a question how much wheel cleaner do u put in the ik9 foamer to water
@ryanurukalo43475 жыл бұрын
Six cylinder jeeplife Bruno he has multiple videos about that. Light dust: 4oz to 1 gal Medium dust: 8 oz to 1 gal Heavy dust: 12 oz to 1 gal
@sushh15 жыл бұрын
he did a video on the dilution process, check it out: kzbin.info/www/bejne/mIHOk2Z-mdRqgZo
@JSTANGMCSM5 жыл бұрын
What ceramic coating would you use on gloss black wheels?
@autofanaticcars5 жыл бұрын
none i do not use those coatings on my paint or wheels but plan to try some soon
@smoker39984 жыл бұрын
Where can we buy the orange handle you put on the Wheel Woolies brush?
@autofanaticcars4 жыл бұрын
all my brushes were custom made and fabricated by me, handles i bought at a local Grainger but you need to machine the ends to fit and its not something DIY can do.
@smoker39984 жыл бұрын
Will you fabricate a bunch and sell them to your adoring fans?
@ryanurukalo43475 жыл бұрын
How many cars should I expect 1 gallon of wheel cleaner to last? (In ik9)
@autofanaticcars5 жыл бұрын
depends how you use it
@metakmoto5 жыл бұрын
Love the channel man! Just took all my rims off on my GT350 and cleaned the barrels. Love it! the wheels, brake calipers and rotors look outstanding!
@gtrmageddon3 жыл бұрын
What kind of jack did you use to lift the car? I need to go around the car and pull and put back on one wheel at a time. I have heard the Quik Jack is a real failure.
@MrGreen_4 жыл бұрын
Different flavoured brushes.. 🤪 Them bristle brushes are very hard on black painted rims.. light scratches everywhere
@autofanaticcars4 жыл бұрын
i never use bristle brushes on black wheels i just showed them for reference purposes.
@archjuh5 жыл бұрын
Man love that idea for the woolly wormit. Saw it before from Pan''s video and really disliked the idea of getting my hands wet and contact with the wheel cleaners and here you come with a great solution for it! +10likes
@autofanaticcars5 жыл бұрын
stay tuned to my Instagram i am going to be offering these modified in my web shop soon still working on a few ideas now
@MStrange882 жыл бұрын
I don’t understand how ur channel is still at on 83k subs. I’m so ocd about detailing my 350R and ur vids are great
@autofanaticcars2 жыл бұрын
because KZbin is blocking content through their algorithm from a majority of creators on purpose to push their bias content and not pay creators. it is affecting even the largest channels and quite pathetic and biased which I am glad I only do this for fun and not my income like most. thanks for watching and enjoying the content
@MStrange882 жыл бұрын
@@autofanaticcars that’s a damn shame! Well I enjoy your content a lot. I can always appreciate someone who doesn’t take shortcuts! My father taught me the same lessons growing up.
@autofanaticcars2 жыл бұрын
nice stay OCD if you can an enjoy the content
@thebackstab87305 жыл бұрын
if you dont want scratches use a bigboi mini blower or the pro version no more scratches and microfiber cloth needed :)
@autofanaticcars5 жыл бұрын
i blow them dry for the most part it is the water that runs from the rotor vanes after your finished with the wash that ruins the wheels so you must give it time to drip then clean the barrels as i show if you blow dirty water your causing more of a mess on gloss black
@genysmenrunner16775 жыл бұрын
thebackstab do you have the bigboi? Do you like it?
@Jeeper13785 жыл бұрын
I use one of the finger mitts from OG. I love my 5 spoke wheels, can get to the entire wheel with the finger mitt :)
@slape545 жыл бұрын
Man I love the new brush but stopped using because the lug nut is not a good enough handle. How did you modify the handle? Thanks
@codhruv8393 жыл бұрын
ever find out?
@Shanester663 жыл бұрын
Question...My American Force wheels on my truck have a few faint scratches from improper cleaning (bad detailer). What is the best way to polish the scratched out? My wheels are black.
@codyd80845 жыл бұрын
I wish they would sell a option with a handle
@autofanaticcars5 жыл бұрын
me too i have suggested it to them already.
@MyGuyKirby5 жыл бұрын
Some like the speedmaster brush, but I too hate getting sprayed. But they are great in engine compartment!
@autofanaticcars5 жыл бұрын
its a good brush but i just do not trust it on gloss black if you are as much as a "fanatic" as i am plus getting hit in the face and arms sucks using it.
@toddmarten13643 жыл бұрын
Thanks for this! My wheels are fast rennens black. A lot of tight spots to get into. Trying to decide which one to buy. Have you tried adams polishes wheel brushes?
@68ninja115 жыл бұрын
What about using absorbers on wheels for drying them do they scratch the wheel surface
@deregulationIC5 жыл бұрын
Ugh I really need to get into DIY car cleaning. And buy ur wheel cleaner, it seems so fun. But I'm a lazy and brokecollege student. Soon enough I'll become a weekend warrior.
@Carlos.Rivera5 жыл бұрын
Did you will sell the "wormitt" modified?
@autofanaticcars5 жыл бұрын
it was a PITA to do what I did not sure what i would even charge to do these for you guys. I am working on a bunch of cool handles for wheel brushes as we speak il be showing the finished designs soon in a full video and offer them in the web store
@cuttnhorse20135 жыл бұрын
What do you use and how to clean perforated leather seats. Have a lot of your products. Thanks
@bobbymorgret5 жыл бұрын
Can you make a video how you made the handle? Thanks!
@MadeInYugoslavia3 жыл бұрын
is there a Video about modifying the handle of the Whoollywormit? Or can i buy a modified one anyhow?
@autofanaticcars3 жыл бұрын
I was modifying them but its way too much time. I seem modified brushed in my web shop, www.auto-fanatic.com
@cbruno121805 жыл бұрын
Hey af my man wow i just received the 007 gloss spray holy shit my man you fucking nailed it my white jeep overland looks outstanding ive used bead maker,v07,gtechniqe and let me tell you nothing can evwn compare wow and the windows holy come out streak free same with my black polished wheels this shit is just a life saver man just thought id tell ya great product and thank u for making it!!!!
@autofanaticcars5 жыл бұрын
thanks for sharing its truly an awesome and super versatile product with no BS
@cbruno121805 жыл бұрын
Auto Fanatic agreed what i like about most is the ease of wiping it off just makes my job much easier and enjoyable
@millionkilliati61405 жыл бұрын
Awesome bro, you should do a quick video of how you modified your brush with a handle
@Toxik_Hellcat5 жыл бұрын
Agreed
@marqkey50635 жыл бұрын
Yes. You bated us with your Wormit mod. What specifically did you do?
@tinonunez11685 жыл бұрын
In my opinion, this guy is the best on KZbin for automotive content!
@autofanaticcars5 жыл бұрын
thanks for the support Tino.
@Butterffinger56785 жыл бұрын
What tricks do you have for multi-piece wheels that have flares on the barrel and the joint that the spokes of the wheel bolt/weld to, that make accessing the whole barrel difficult?
@autofanaticcars5 жыл бұрын
use the wheel woolie, get a heat gun and manipulate the arm to work for your rims, i do it all the time for my custom Forgeline 3 piece wheels on my pro touring Mustang
@mburnside5845 жыл бұрын
How about touching up glass black rims that rubbed up against a cement curb?
@autofanaticcars5 жыл бұрын
thats easy i have fixed many customers cars using Spies Hecker 2K paint and my Iwata Airbrushes. next time i get to do one il shoot a video on this.
@eliteowner1215 жыл бұрын
Hey AF any other place we can get the Erie tools undercarriage cleaner. Amazon is sold out.
@autofanaticcars5 жыл бұрын
try contacting the manufacture direct, Amazon sold hundreds off my video i guess they are waiting for new stock to come in which will eventually happen
@gust94644 жыл бұрын
Great video! Do you ceramic coat your gloss wheels?
@OuzoLouGarage5 жыл бұрын
Thanks for the tips to get the wheels clean
@joshgonzalez21875 жыл бұрын
Awesome. Been a long time subscriber and and I can’t be the only one waiting for a proper tool box tour! Haha. I think us gear addicts will appreciate it. Keep the good content coming!
@autofanaticcars5 жыл бұрын
yes i will do this when the weather warms for for a bit.
@lutfilamat42154 жыл бұрын
Where did you get the handle for the wheel woolie?
@autofanaticcars4 жыл бұрын
Grainger but they are not easy to fabricate yourself.
@genysmenrunner16775 жыл бұрын
Do you use something to prevent the rust in the rotors after washing the wheels?
@autofanaticcars5 жыл бұрын
yeah i drive it after im done
@genysmenrunner16775 жыл бұрын
Auto Fanatic thanks
@RixterNow5 жыл бұрын
How did you add a handle to the Woolywormitt?
@autofanaticcars5 жыл бұрын
Auto Fanatic Magic, go check out my Instagram feed I may be offering these for sale in my web store
@Joe_Friday5 жыл бұрын
Thanks for the video. I just recently got a bunch of detailing products (almost got the woolie wormit). I too have black wheels that came on my Type R. They are sooo hard to keep clean. These tips should help. What do you protect the wheels with? I recently got some Wheel Guard Max Coat and Wheel Guard Wax from CG but am now thinking that won't repel the dust too well.
@autofanaticcars5 жыл бұрын
i just use collinite 476 wax but i recently got some new stuff il be trying out for the channel when time permits
@Joe_Friday5 жыл бұрын
@@autofanaticcars Does it help repel the dust? I have some ArmorAll Brake Repellent spray but I think it leaves a light blue colored residue on the wheels. It can easily be wiped off though. The spray did seem to help keep the dust from sticking.
@autofanaticcars5 жыл бұрын
stay away from that Armor all stuff it ruined a set of wheels on me years back. the wax does help or you can try a ceramic coating or ceramic sealant
@Joe_Friday5 жыл бұрын
@@autofanaticcars Ok noted. I liked the concept of the spray but after it left that residue on my wheels I started having second thoughts.
@tyg14345 жыл бұрын
I tried the mineral spirits works like a charm. 7 dollars home depot
@autofanaticcars5 жыл бұрын
glad you took my tip, best way to clean tires
@tyg14345 жыл бұрын
@@autofanaticcars RV water filter does it stop water spots ?
@michaelfleming87065 жыл бұрын
I will take that speed master brush!
@autofanaticcars5 жыл бұрын
gone already shipped it out just now
@steverabbits3 жыл бұрын
Great vid, I'm definitely getting one of the Wooly Wormit brushes. Anything that makes cleaning wheels easier for me is a no brainer, I hate cleaning wheels so the better I get at it and the easier it is the less I hate it! I already rinse with DI water and I can see me going down the route of blow drying too now I'm getting older, it just saves my poor old knees and shoulders 👍