tire changing basics.wmv

[@alhere6335]

12 years later and quite possibly the best video I could find for doing this. It is great to hear your thought process and explanations. Thank you

[@Krowwfather702]

“If you don’t like it, go find another channel to watch” lmao 🤣 perfect words

[@dirtmoves5894]

The best tutorial that I have seen. I would absolutely love to see you do a tutorial on a 19.5 24 backhoe tire. You all make this look so easy, but I can tell you from first hand experience, they will kick your ass if you don’t know exactly what to do. Thanks for your detailed explanation.

[@El503Guanaco]

I’m a new comer at changing tires. Still doing a lot of training. Your videos will help me a lot. Thanks

[@TripleATireService]

Thanks for watching. Glad to help.

[@Hp2G1]

Great tutorial video! I changed car and motorcycle tires before, but bought some heavy duty tire irons to change my rear John Deere Tractor tire. This video is a great basic how-to for big tires. Thanks!

[@cooperbrown484]

I'm23 and a tire man myself I grew up around the tire business my whole life and I've watched about every tire changing video on KZbin (just BC)and yours are the best... there are a few things we do differently for example on a 10.00 20 in stead of putting the tire on the rim on the ground I lean the tire against my truck and put the rim in the tire and let it all down then put on the ring... As far as the "golden tool" or whatever I've had big companies call me out BC they couldn't change the tire with that thing and seen guys bust a$$ using that thing taking 2-3hrs on 1 tire.... I'll take my tire irons over anything that any day witch brings me to next point I have 2 "curved mounting" bars that I use but 1 of them I ground the lil lip for dismounting the inner bead off the rim so it's like a "spoon bar" but with a lil more leverage BC its longer then a reg spoon bar and if you need that other end it's already right there... also if I'm doing a outside tire i don't use the duck bill tire hammer to break the bead I have a slide hammer made just for tires BC that inner bead is alot of times hard to break in my experience... I've taken the outside bead off and the inside is still stuck even after beating on it with reg duck bill hammer for 20min i get my slide hammer and break it it in 2 hits.. I also listen to my cheetah tank to tell when it's full,.. do you kno about using starting fluid to also seat the bead?

[@mariogonzalez7442]

I've watched your videos; 2 of them and and congrats my friend, you really an expert on your line of work Well done and explained!! Thanks in deed.

[@lesglover6515]

You are an easy teacher to follow. Well done.

[@Anonymous-it5jw]

Great tips in your series of videos. Thanks for making these and sharing the benefits of your experience.

[@edenfieldjared0]

best tire video that I have seen thanks for sharing your time, wisdom, knowledge and experience. May you be blessed in your business

[@gabyygaby3336]

What a great video! You do a wonderful job explaining the tricks you know about making the job easier. Thank you for sharing !

[@msfkmsfk]

You a funny ass nigga. "I don't need to use it" LMAO.

[@mongoose60ft42]

Great job explaining and explains the cleanliness of dirt. Very helpful

[@jamesdavies7526]

you break it down about the easiest of anybody I have ever watched. Done a few myself. most of mine are 16" GRRRR!! and rust welded on!

[@michaelwhite2750]

Thank you for sharing with us. Have you try the OTC 5727 slide hammer / wheel tipper (ALL in one tool) and really save on your back.

[@edwbenda]

thanks man ,i just start doing truck tires,i don't have to much exp ,but those tips help a lot….

[@dieseltrucksfirewood2540]

I just found you today and your videos, skill and teaching abilities are straight forward and excellent. Thank you.

[@zachvallow6703]

nice vid man. had my first day today changing truck tires and they didn't wanna show me anything. This vid might help me keep my job. worst first day ever.

[@hprider01]

Thanks for advice Man New to the Game.

[@MrBankshotone]

I love it! "Don't like it find another channel to watch" lol!!!

[@luissoto6736]

Bro u do a good job god bless u

[@mesasavea8225]

Thanks for some awesome tips

[@fatcattowing8990]

Great videos!!! i now know how to take & remount a 19.5 (not as fast as you) but i can do it now

[@equals-kl9hm]

Thank you for the demonstration, be safe!

[@sbib1425]

Can u include a video on seating beads? Some I've encountered would seat good with just air some had to use starting fluid or big air bubble. But would just like your tips it would be nice to know other then that I enjoy your vids you make it look so effortless keep it up!

[@kennethridenour3168]

Servicemen have used gasoline in a jug to dismount tire then gas dries if tire has to be handled. Performed at a shop around Cincy.

[@DavidRodriguez-km2mj]

All excellent but don't forget to wear safety glasses.

[@noahingram8052]

Great video nice Ford truck to

[@TripleATireService]

Thanks

[@benjaminstockton3431]

old school best way to do it hey this is ben your neighbor

[@faisalchaudhary8760]

Brilliant video. Thank you for uploading it.

[@janrontowingrecovery5989]

Are you still changing tires? Bring the videos back.

[@TheSickboyr6]

Great video bro,I'm looking to start a business. Thanks again bro.

[@JUANLOPEZ-dl6ux]

Great training and detail

[@autojumbleusa]

👍 Great video! 👍 ☆☆☆☆☆

[@raylapointe3955]

Great video very explisive, I personally like using 2 tubeless bar and kick them in more then the spoon I've seen tire guys who don't pay attention tear up the bead but thats me, but again nice presentation (42 yrs experience) started wben I was 18 now I'm 60

[@risnoefendy3303]

thank for your tips,my job is same your job too.nice to meet you i m from indonesia

[@skipbayless7912]

You are a bad ass! Thanks for this great info.

[@PokkutoolsMalaysia]

Thank you sir for your video

[@jjcjr009]

Good job dude, thank you for a great video.

[@2259miguel]

thanks man, for you tips that help me a loot im new on this

[@geoffgeoff143]

Tip for hammering. Look at where you want to hit. Many people don't and so miss.

[@juanantonioramirez3673]

Al montar la primera ceja no se debe golpear la llanta con las rodillas con la pura fuerza d las manos debe montarse

[@truckertom3323]

Good video you have done there, thanks for sharing, i have learned from you posting.

[@johnhernandez8219]

PERFECT VIEDO STEP BY STEP THANKS FOR SHARING

[@pauljohnson7295]

enjoyed the video Thanks for the great Tips

[@РеКрут-г8у]

what kind of compressor are you using ?

[@TripleATireService]

Ре Крут in the video it’s a Ingersoll Rand compressor with a Koehler engine. Currently I use a champion compressor with Honda motor electric/manual start.

[@swflmotorsportsfan6667]

great tutorial!

[@sunnyroadtrucker1717]

CAN'T BE ANY BETTER WAY THAN THIS TO DISMOUNT AND MOUNT BIGASS SEMI TIRE

[@1Simpleway]

I want to go change truck tires now.

[@chitolopez3585]

Can you post a video about how to remove a rusted "stuck" rim.. Where are the sweet spots to hit it

[@YoungChristopher1]

Chito Lopez Depends on the rim and other things. For the most part if it is rusted, look for where the rust is. If it's on the studs I recommend the back side. If it is stuck to the hub/drum then the front of the tire will work as-well. Use a rubber mallet tho, unless its steel.

[@YoungChristopher1]

+cj young Also depends on weather or not its an outer or inner tire.

[@YoungChristopher1]

+cj young Ps: This is for getting it off the truck. If you meant off the truck already.. dismounting... really aint not tips I can see being helpful.

[@quincylachance1560]

Great video

[@carlosburnell5634]

best step on the first bar or take out not leave it in as they have pinged off an gone flying

[@TheLeon25277]

Nice video

[@seanhortillas1]

More easier then the tire is old but new tires are little harder

[@lobitosanchez4045]

Go😃d Job buddy,thanks for the info,,, have a good day,! 🙌

[@alimuzafarali9764]

Hi sir I am tayar truk taknican my what up nambar 00966580125371 viza send me

[@Rockerlopez-qi8ei]

you missed a step. what happen to cleaning the wheel and inspecting it? removing the rust?

[@jjaguiniga]

thats a gy and mich world.. what he did.. is the real world..

[@centralontariotireguy]

Pretty much how I do it lol Jr do u still have a face book page?

[@oharrellcoins5553]

How did you start your Business

[@daveval719]

if you were to dismount standing you would only have to lift once... not knocking on you or anything but as the saying goes work smarter not harder

[@3subscribers549]

How much is your income per tire you change or repair?. Is it a good source of money?

[@족발을줘요]

👍👍👍👍👍💯

[@sujonsujon6953]

I like this work because it is my work

[@issort44]

you still in business?

[@geoffgeoff143]

For a real challenge, knobby motorcycle tyres with tube. Good vid. Only comment is your lack of safety.

[@amritaprakash7842]

very good

[@justinjackson9591]

thank you helped alot

[@GOLIATHDarce]

Dude, Bad Ass..thanks

[@TripleATireService]

Thanks brother

[@evloevyousuf3329]

thanks a lot man

[@TripleATireService]

+yousuf evloev glad to help

[@IsaacCharles-q1m]

GREAT VIDEO TRIPLE A TIRE REPAIRS GREETINGS FROM THE UNITED STATES VIRGIN ISLANDS IN THE CARIBBEAN US TERRITORY ST THOMAS I AM NEW TO YOUR CHANNEL I AM A JOURNEYMAN HEAVY EQUIPMENT MECHANICS HELPER MY DAD WAS A CERTIFIED DIESEL TECHNICIAN HE TAUGHT ME ABOUT HEAVY DUTY TRUCKS AND EARTHMOVING EQUIPMENT REPAIR BEFORE HE PASSED AWAY I AM PERSUING A CAREER IN DIESEL MECHANICS AND WILL GET MY CDL CLASS A LICENSE TO DRIVE TRACTOR TRAILERS AND WILL BECOME A CERTIFIED DIESEL TECHNICIAN AND OPEN UP A SMALL GARBAGE REMOVAL AND HEAVY EQUIPMENT REPAIR OPERATION THESE VIDEOS ARE AWESOME AND EASY TO UNDERSTAND KEEP THEM COMING MAY GOD BLESS YOU FOR THE NEW 2025 DO YOU HAVE ANY HATS WITH YOUR COMPANY NAME ON IT I WOULD LIKE TO GET ONE AND A 2XL SHIRT WITH YOUR COMPANY NAME ON IT GOD BLESS

[@fredcojoe6699]

awesome video for a guy with 2 bars and a cheetah tank! everything you need to know to be dangerous!

[@diamondcutter8535]

Thank You!!

[@gabrielbarruffe8037]

Great!

[@jamesdavies7526]

As you may have noticed most of the guys who knock on you haven't posted a video and they likely won't!!

[@JacobSmith-cx5fj]

Thank you

[@TripleATireService]

Thanks for watching

[@washlife419]

Has a tire ever blowin up on you?

[@TripleATireService]

Sure has

[@reyjimenez9203]

Dónde estás cubano

[@silverdragontaylir8252]

Genius

[@haidang3865]

very good. thanks

[@kubeanie18]

what no GT bar lol

[@khuyennguyen2150]

Ok

[@thommytwotoestimesthree847]

So much background noise...had a hard time hearin' y'all. Nice video otherwise.

[@GhulamMurtaza-ko2ig]

murtza

[@aaronbroughton3910]

ma man what your showing is dangerous

[@richardherndon9768]

aaron broughton Yeah it's a dangerous business. It's not for everyone. If you wanna stay safe then get you an office job..

[@douglasanger3036]

holy shit! while you have the basics down. your not showing a tire thats been on a rim for 10 years or longer. those have to be fought of that rusty fucking rim. have you ever tackled a 20 year old farm tire? either peel over or split-rim? ive been doing this since 1979. go home boy.

[@jerrykinnin7941]

Great video

[@TripleATireService]

Thanks

[@silverdragontaylir8252]

Great video