Tire Machine Coats 40 40A Removing Tire For HMS

Tire Machine Coats 40 40A Removing Tire For HMS. I had a good start today removing tires for HMS. I got all the tires abound my work bench cleaned, Thanks For Watching.
Send Fan Mail or Product Testing To
Phil Macska
PO Box 6
10348 King George Blvd.
Surrey, B.C. Canada V3T-2W0
E Mail [e-mail]
Special Thanks to all my Members & subscribers for keeping my channel alive
24K Disposal & Salvage Ltd.
Garbage Removal Lower Mainland, B.C. Canada www.24kdisposalandsalvage.com/

[@josephcormier5974]

Thank you for sharing this enjoyable video with us seven stars brother

[@CanadianTreasureHunter]

Glad you enjoyed it

[@JER2505]

When you are rotating to take first bead off, its very importan to push down the tire on opposite side. This to give space for tire to strech inside the rim.

[@jamesross382]

Hi Phil. Big job and now your work is cleared up.Big mountain of rims should bring a nice payout.Enjoyed vid ery much.Keep up the good work.Thx

[@CanadianTreasureHunter]

Thanks 👍

[@duhamellchannel]

Hey Phil. Find one of your local tire shops and ask them if you could buy a wheel weight puller and valve stem puller from them. Might make things a little easier for you. Might have to ask a few different shops

[@CanadianTreasureHunter]

Thanks for the tip!

[@Robert-nj8io]

Phil you do great work in any thing you do your videos are top notch you go

[@CanadianTreasureHunter]

I appreciate that!

[@johncooper9980]

Great job on the tires! 👍😎👍

[@user-vh7bh9eu5s]

i'd say about a 1,000lbs.,but they need to be done,and 68 more sitting around the yard that also need to get done,prepping them ahead of time will save you time in the end.great video

[@billwilson1320]

Don't forget to add subtitles Phil. Thanks.

[@jerrysadventures8952]

you are tire man thanks

[@briantreacy4209]

Hard Going there great video Again well Done man plenty of HMS Now yard is looking Good well done 👍👏👏👏

[@CanadianTreasureHunter]

Thanks 👍

[@robban057]

I think you would need a mist lubricator in line on your air to the tiremachine. That would help it run more easily. That was a tough jobb. Robert Sweden

[@lawrencelipon8673]

👍👍👍👍👍👌Great clean up and production, the little compressor did surprisingly well once you straightened out the power problem, great job, heavy work,,,,,you are the man!!!

[@CanadianTreasureHunter]

Thanks 👍

[@drfhgfgdthrt1715]

Great to see the progress. A big chunk of the tires is done and you have more space cleared up. Area around the workbench is looking great.

[@jeanniemac4231]

Good job. Hard work but results are so noticeable.

[@CanadianTreasureHunter]

Yes, thanks

[@tammyrouse7422]

great job I think you could start your own tire yard lol thanks for the great vieo

[@CanadianTreasureHunter]

Thanks 👍

[@lfurches]

It's like pancakes, Phil. First one always burns or sucks because it is gooey, then you have a great batch, lol

[@CanadianTreasureHunter]

On Film, Off film they come off perfect

[@michaelschuenemann3505]

Well done Phil - got all Your Tires done around Your Workbench - that Tire Machine and the Red Air Compressor working Brilliant - a few Tires gave You Problems ! Fantastic Progress - You sounded very Please ! Try that Table Saw out - if works You may gonna use it ! More Tires in the Yard to be done at a later Stage - Glad You had a few Breaks in between and lots of Fluids ! Another Great and Long Video - enjoyed it and many Cheers from Australia !!!!

[@CanadianTreasureHunter]

Thanks 👍

[@user-rl4rm7ht1x]

Subscribe every one.

[@patdeal8664]

Great video

[@CanadianTreasureHunter]

Glad you enjoyed it

[@patrothwell9138]

U got a lot of them done u still go a lot more. The yard is looking good. You can tell u been really busy

[@andygardiner68]

Cheers Phil thanks for the video mate 😁😎👍

[@CanadianTreasureHunter]

Any time!

[@bigcountryscrapper6885]

Great video my friend

[@CanadianTreasureHunter]

Thank you 👍

[@ioncoroama9783]

SUPER

[@CanadianTreasureHunter]

Thank you! Cheers!

[@noneyabeeswax3200]

Man that is a bee hive tool😮they are used to scrape wax and pry frames apart,do you keep bees too? You do it all! You can do an engine swap in little red if she finally gives up they aren’t very hard all the stuff I see you doing I’m very confident you could do it.

[@altafrahman2254]

Processing more than 50 tires on a semi automatic machine is a back breaking job. I am sure your back and shoulders are sore with so much lifting. As you prefer variety, your options are 1) To process your neighbors frames which is less stressful on your back and shoulders, 2) a microwave video. It will be only be wrist work and not much load on your back. 3) Or for a change you can do a HMS rim yard run, tire rubber disposal and all remaining bottle run.

[@CanadianTreasureHunter]

Need to get all the tires done

[@amadopimenta1313]

Infelizmente as legendas continuam indisponível. Um abraço do Brasil 🇧🇷🇧🇷

[@CanadianTreasureHunter]

Sorry not sure why?

[@user-ru4es2qu4v]

👍👍👍👍👍

[@alialsubaie6155]

👍🌹💪🇰🇼

[@Nas_Atlas]

I finally got to watch this video. That red tank does the job. I have to know what pressure is it set to? My big tank is factory set to get to 150 psi. I usually shut it of before it gets there. 150 psi is a scary high pressure.

[@CanadianTreasureHunter]

Its set high not sure the pressure 100?

[@kevinraines4318]

we charge min of £5 for picking tires on rims if you was in the UK you could have has many as you wanted

[@gemmalawrence2576]

Hi mate do u not have any racing drivers by u that could take some of them tyres Cople of bucks each

[@y.lelivelt2619]

Phil,why is the subtitles gone?

[@CanadianTreasureHunter]

They say there on, Not sure what happened

[@sebrassino]

What pressure are you using on the machine. I found a manual that specifies: Air Source The RC100 requires a 5 CFM air source at 150 PSI. The safe operating pressure range is between 110 PSI and 175 PSI at the machine. For motorcycle and ATV tires, this pressure should be regulated to 90-100 PSI at the machine. You work hard but this underpowered machine is far from efficient..

[@CanadianTreasureHunter]

I have it around 100 Need to get a bigger one some day

[@noelhenderson8095]

You still don't have enough air the machine will never work properly if it does not have the air to make it work and when you were taking the bar off it should be only the end that is in the tyre not a quarter of the bar that is not making your life easy you need to get the air situation sorted out otherwise you're making more work for yourself

[@CanadianTreasureHunter]

I have to work with what I got

[@noelhenderson8095]

@@CanadianTreasureHunter I just hope you don't get injured because it is a very high possibility

[@joenewman6939]

I think that machine had a sticker on it that said it doesn't work on donut tires the bottom pusher hits the rim i used that same tire machine for years

Where do you go to get rid of the tires

[@CanadianTreasureHunter]

I will do a video today

[@tomlim4406]

👍👍👍