Tired of Split Fountain Prints? Here's 3 Different Ways to do them

[@Ryonet]

Thanks for all the love! To answer some Q's Dive Deeper in the blog: scrnprntl.ink/Fountain_Prints For this one you're going to want to make sure you know How to Clean Ink off Screens: scrnprntl.ink/CleaningOffInk Equip Used: FN-INK™ Plastisol: scrnprntl.ink/FN_INKs Squeegees: scrnprntl.ink/Squeegee Sgreen® Supreme Wash: scrnprntl.ink/SgreenSupreme_Wash Printing on a Riley 300: scrnprntl.ink/Riley300Press

[@laustenfound]

Love seeing those Lee squeegees!

[@dresmith3016]

Awesome video. Love learning new techniques. Thanks for sharing.

[@ianolson6378]

Loved this video! Short but a awesome print content dropped! 🔥

[@antiDesigns617]

That circle blend is awesome!!

[@Ryonet]

Yeah @antiDesigns! It was fun to do too! I might do it a little different next time, but still so cool to experiment.

[@n8sgr8adventure]

This is fantastic! Nice chill vibes perfect creativeness without anxiety levels going banana's. Eleviation of pressure! 👌 Now that's what I'm talking about right there! Thx again for all your great tuts Josh! ❤️ You Ryonet! 🙏👍

[@Ryonet]

@N8s Gr8 Adventure THANKS for the kind words!

[@ndrewJanney]

Great Video, Josh!

[@easttexaslady4618]

I love this! Thanks for sharing.

[@danielmamman1039]

love this channel like crazy 💯.

[@Ryonet]

Much appreciated, Daniel!

[@Kreasikankaryamukawan]

Thnx 👍👍 good job

[@setiroculus]

it's fun to mix in dollops of transparent medium as well.

[@brandonschmunk4404]

Great Video!

[@ATeePrint]

I can't wait to try that!

[@marthagutierrez6281]

I love them awesome job! Is the temperature to cure them in a black tee is different than other colors? I am using water based speed ball

[@Ryonet]

Hi @Martha Gutierrez The cure temperature will depend on your ink and what temp it requires to be fully cured. There most likely wont be much difference between garment colors. if you are building up a thicker ink deposit on a dark color garment, you will need to take more time to cure, but not really a change in temp. The added time ensures that we are getting that temp through the whole ink layer on the tee. Hope that helps.

[@chanceporter5286]

Tape down paint sticks on top of the frame just to the edge of your squeegee. Make your print a little more consistent.

[@mommarl729]

Wow I’m loving it 🥰 can you possibly tell me what size screen did you use

[@Ryonet]

Hi @NiLaja -NiNi ! Happy Friday. The screens were 20"x24" and the mesh count on one was 156 and the other I BELIEVE was a 200. Hope that helps.

[@Dillyo82]

What about an auto press? Should be easier for vertical strokes right?

[@Ryonet]

For sure. It is a lot easier to get a consistent color gradient and end product with an auto. It takes out all of the human error!

[@erictuxen]

Can you get the same results with water based inks. I wish that I had the time to experiment with this today; I ❤️this video!!

[@Ryonet]

Hi @Eric Tuxen. you could use water based inks. they may blend and become "muddy" much quicker compared to plastisol due to the consistency of the ink. Plastisol can have a little bit more body. BUT, as long as you are willing to experiment with it, you can make it happen!

[@marcomaiolica214]

Fountain ink with plastisol it's much easier, the stroke you hit usually goes on the same direction and blending the colour will cone much later...by the way with waterbased colors I suggest you to drop few colours one print at the time, if you use a retarder you can manage the drying easier

[@wiwidvlog5991]

Woww beatifull

[@randylclark4665]

What is that white knob on the back of your squeegee? What is its purpose?

[@Ryonet]

Hi @Randy L Clark. it actually was a camera were experimenting with. no actual screen print purpose. Happy Printing!

[@Dragon-Slay3r]

🛏️?😂

[@Dragon-Slay3r]

⬅️