Titan Linebacker / gym hack

[@riccarrasquilla379]

thanks for the video

[@coldblood92]

Genius! Was just trying to figure out a hack for this myself. Thank you

[@SuperiorStateFitness]

You’re welcome! Thanks for the feedback

[@thechosenone818]

Titan pay this man

[@davidb1975a]

I just got the attachment without the stand. I'm thinking that a modified stand that the attachment sits on could work also.. We'll see what I come up with.

[@SuperiorStateFitness]

@@davidb1975a that was actually the first thing I was trying, but it was just a bit more complicated so I went with the cotterless ring pins. 😎👍 I was going to use the farmers walk handle in a cradle.

[@a3090102735]

Impressive, you drilled a hole into the barbell and linebacker, can you share what drill did you use? I'm afraid of doing that as it may break them

[@SuperiorStateFitness]

3/8 in. X 5 in. L High Speed Steel. I used a smaller drill first for a pilot hole to carefully align.

[@a3090102735]

@@SuperiorStateFitness😮 I’m afraid of doing myself, any workarounds to load weights if you don’t drill the hole

[@SuperiorStateFitness]

I can’t think of any other work around. I had to load the weights with the Linebacker on the floor before. I suppose if you had a training partner, you both could load the weights on each side at the same time. Maybe someone with a drill press could help you.

[@a3090102735]

@@SuperiorStateFitnesshow about a high enough platform on one side, e.g ladder

[@SuperiorStateFitness]

@@a3090102735 I’m not sure

[@jamnfred]

Question. For the hack to work? Do I have to drill in the linebacker and the landmine on the floor? I just bought it and use it today. But frustrating how it turns on you? Please reply. Thank you 🙏

[@jamnfred]

Do I have to drill through my barbell so the landmine at the bottom will work as well?

[@SuperiorStateFitness]

@@jamnfred yes, I drilled straight through both the linebacker and axel bar (all the way through both sides. I did the same thing with the Landmine end. I used a 3/8 inch diameter drill bit making sure it went straight through. A drill press would make it easier.

[@SuperiorStateFitness]

@@jamnfred btw - I would use an Axel Bar. It’s strong enough so that it doesn’t flex and it’s hollow so you can drill straight through it. The Landmine and the Linebacker both will need holes drilled straight through for the cotterless ring pins.

[@jamnfred]

Thank you so much. I just ordered an axle black bar that’s 85 inches long.

[@SuperiorStateFitness]

@@jamnfred you’re welcome!