Titanium Easy Flux 125 Modifications, Upgrades and Review

Рет қаралды 11,333

Күн бұрын

Пікірлер

@Rein_Ciarfella Ай бұрын

I’ve now worked my way through a bit over 50 of your videos, in order from the beginning. Trying to get your numbers up. 😉🔧👍

@Rein_Ciarfella Ай бұрын

Nice! I’m seeing some videos now with multiple capabilities for $150-200. That’s what I’m shooting for eventually. Donyboy has reviewed several of them in the last few months.

@MrSilvervw Ай бұрын

Fantastic content 👌 👏 👍

@hester781 Ай бұрын

Thank you! 👍🏻

@richd9771 11 ай бұрын

I have the same welder and love it. I dont do any huge welding projects which would require a better machine. So far after 9 months and a bunch of projects working on my 3 trailers its still going strong.

@hester781 11 ай бұрын

I’m in the same boat as you, I’ve never come anywhere close to 3/8 material, mostly just Mower decks/Sno Blower buckets. And I still absolutely love this machine!👍🏻

@richd9771 11 ай бұрын

I like simple and this for sure is simple..gotta love harbor freight if you know tools then you good

@stuartmarkman769 Жыл бұрын

It also holds 2 LB. spools. Great little home machine and easy too use.

@hester781 Жыл бұрын

That’s good to know! I’m loving it so far 👍🏻

@chrisjvas 6 ай бұрын

I just got one and I’ve been watching a bunch of videos, I thought I messed up for a sec when he said 1 LB 😂

@iamnoone. 8 ай бұрын

Great idea

@hester781 8 ай бұрын

Thank you! 👍🏻

@RameyOwen Жыл бұрын

This welder accommodates TWO pound rolls of wire. And that ground clamp now costs $15.99. HF does offer a less expensive ground clamp for $6.99.

@hester781 Жыл бұрын

Wow, Can’t believe how expensive things are getting

@yermomsboyfriend 6 ай бұрын

Glad I bought mine back when I did. Doubt I'll ever need another one.

@KyleRS877 4 ай бұрын

I put the medium grade clamp on

@lawncare2000 2 ай бұрын

A grinder and enough time... Now that's funny

@hester781 2 ай бұрын

😂👍🏻

@raystanton238 Жыл бұрын

The carrying strap is fully adjustable so just shorten it up and use it as a handle to move the welder around.

@hester781 Жыл бұрын

If I adjusted it all the way down to where it could be used as a handle then I wouldn’t be able to open the cover. Just comes down to personal preference 👍🏻

@nobueno8652 11 ай бұрын

I bought this welder and had a question about the wire. I installed a 2 lb spool and I am getting down to the last of it. What happens when I get down to the last 12-18 in of wire? Will the wire feed keep cycling until it stops? Or will I have to clip it and just let it feed out the stinger?

@hester781 11 ай бұрын

So when the spool runs out, it’s going to keep feeding until it gets just past the feed wheel, it will stop feeding and you’ll have to pull the rest of that wire out of the gun/hose and throw it away. So unfortunately, you’ll be left with three or 4 feet of waist.

@nobueno8652 11 ай бұрын

@@hester781 thanks for the tip. No one on KZbin has covered that process or made an attempt at covering that. I know you made a nice how to on installing a spool but not when you run down to the last 3 feet lol. Thanks again.

@hester781 11 ай бұрын

@@nobueno8652that’s actually a very good point, I never even thought of that but it’s a great question 👍🏻

@WhuchakaV 3 ай бұрын

They have portable mini wire welders to weld in new wire

@JerryEly 4 ай бұрын

Hello what extension cord can I use what gauge ?

@hester781 4 ай бұрын

10 gauge would be my preferred but 12 gauge would be the minimum 👍🏻

@aldovargas5642 5 ай бұрын

Where you buy bought your accesories?

@hester781 5 ай бұрын

Everything for the welder was bought at harbor freight, my welding helmet is a Miller helmet and my leather welding gloves I bought off Amazon 👍🏻

@ScoutCrafter Жыл бұрын

Excellent upgrade! Wearing that like a shoulder bag is crazy! 🫣😂👍

@hester781 Жыл бұрын

Thank you Scout! It doesn’t make much sense to me either. Lol it’s the perfect size and shape for a handle right on top.

@yermomsboyfriend 6 ай бұрын

It can be nice when you are welding overhead, as the lead is so short. If I'm welding exhaust on a car on a 2-post lift, I have to set it on a stool so I can reach the top of the pipe.......or wear it like a purse. Would prefer a handle for carrying though.

@kellydeasy2269 Жыл бұрын

What are these latch called? I like the idea of handle and side latch you installed.

@hester781 Жыл бұрын

So different stores might have different names for them, but these were called Black Spring Loaded Butterfly Twist Latch and Keeper. Here is a link to them on Amazon. 👍🏻 MY MIRONEY 4-Pack Black Spring Loaded Butterfly Twist Latch and Keeper Metal Hardware Toggle Clamp Hasp Box Chest Closure with Screws for Flight Case,1.97" x 1.5" a.co/d/eXURVQv

@kellydeasy2269 Жыл бұрын

@@hester781 Thank you that helps, also is the handle spring loaded?

@hester781 Жыл бұрын

@@kellydeasy2269 yes! Though I could take or leave the spring loaded aspect. I was just working with what I had 👍🏻

@raysplace6548 Жыл бұрын

I'm not much of a welder, either.. But, You know how that saying goes, right? (A grinder & paint, make me the welder I ain't).. 🍻🍻 Do you have a link or anything, for those clamps & handle? Pretty cool idea.

@hester781 Жыл бұрын

That’s the motto I live by!👍🏻