Titanium Suppressor Monocore build and Cerakote Part 3

Titanium Suppressor Tube threading and Cerakote on a form 1 suppressor build Test fired at the end. Be sure you have your Form 1 in hand Before you start your build and follow all applicable laws for your area.

[@vincentvalerio915]

Love the combo of the k baffle and monocore

[@AmateurRedneckWorkshop]

That turned out really great. Your hogs will never know anything is going on. Thanks for the video.

[@bstanga]

+cerberus Thanks harold

[@callofgeorge]

awesome video. im looking at building my own soon as well. contemplating cone baffles or monocore. I'll probably use titanium as well. the sound on the video is killer though. i have to turn it up high to hear you, then the fast forwarded squeal of the mill is deafening lol..

[@conexn]

I am working on a design that takes care of most of the gases and cools them down before they exit the barrel/suppressor. Although still hot the gases are not nearly as hot a current suppressors. First designs are working great, first shot dec. is about 100db -120db depending on how hot the the round is out of a .308/7.52x51, and that is regular ammo purchased right from Wal-Mart.

[@Nordic_Goon]

That's a badass monocore

[@smeglin1]

have you considered putting a wiper on it- it made a huge difference on mine.

[@MaturePatriot]

Is that a mrpete222 cutting oil can I see? - Chip hook, or pliers, to remove chips. - Do you have a DB meter? Very quite. Great monocore.

[@JeffreyVastine]

Nice and effective results.

[@bstanga]

+Jeffrey Vastine the rounds fired last night were the only ones so far, I need to get 500 rounds thought it then i know how well it holds up.

[@Oldvet1946]

Man that monocore was really quiet. I like it better than any so far. Mike

[@bstanga]

+Oldvet1946 Thanks mike

[@heyeverybody5616]

How were you able to get that subsonic to cycle in the 30 Cal? Thanks.

[@blargblarghonk]

Thank you for the ideas. I've been contemplating doing a form 1 suppressor. I have decided monocore is better than baffle stack for longevity and this gives me some idea.s

[@bstanga]

just to let you know this was a fail, the accuracy was bad with this one, I think due to trying to drill that long center hole

[@blargblarghonk]

@@bstanga I'm going to be trying to clone a symmetrical shape. But thanks for the hesdsup. I had planned on .380 caliber since it's going to be used on several non centric barrels

[@exportedafrican]

@@bstanga what do you think the downfall was? The holes not being uniform in the monocore?

[@cullenswanson9664]

WOW. No first round pop? I expected at least the first round through that monocore to be somewhat louder. That was quiet! I'm gonna go with VERY nice work for your first monocore design. How much has the recoil on that rifle changed with the suppressor on it? Really great work. I'm impressed!

[@bstanga]

Cullen Swanson well I hate to tell you this,but the monocore was a flop. it had a huge POI shift. actually it was all over the place. you need to be able to drill a long straight hole, also the threads in the monocore to tube were to find at 24 tpi, they would get fouled up very easy.

[@cullenswanson9664]

That's gotta be frustrating, man. So what did you do to finish up the build? Did you machine another monocore, or go to a baffle stack instead?

[@callofgeorge]

what lathe/mill is that you're using btw? I've been shopping around for a somewhat inexpensive one that is decent quality. want to be able to work on small items like suppressors and large enough to be able to thread/crown/contour barrels.

[@bstanga]

+callofgeorge the lathe is a 13x40 grizzly sorry about the sound, I'll look into that. thanks for watching oh the mill is a 2hp round column mill/drill also grizzly

[@callofgeorge]

+Brian Stanga cool deal. thanks, i'll go read up on them. no biggie on the sound. great info man. watching the rest of that series now.

[@oink079]

I got into machining thinking I could make a silencer. I finally made one for a Ruger Mark III and it worked pretty good. I'm now interested in making one for an AR, maybe I'll try a monocore, it sure is a lot less turning. I was surprised of how quiet it was, how much bore clearance do you have for the bullet?

[@bstanga]

+oink079 i go 60 thou over bore, thanks for watching

[@jawsmod]

Nice! Which do you like better, K baffle or the monocore?

[@bstanga]

+jawsmod I just finished it tonight, the rounds you saw on the vid were they only ones so far, let me get a few hundred rounds though it. I'll let ya know. thanks for watching

[@dsigea]

I was wondering if the titanium bar stock is expensive compared to other metals?

[@bstanga]

It he Ti bar was donated, but the ti tube was $4.25/inch, thanks for watching

[@teacheng3795]

Great video! What caliber is this please?

[@bstanga]

30 cal

[@jfpinkston1]

Great series on the monocore. I'm awaiting approval and have a design similar to yours in mind (including the Ti tube). Any thoughts or improvements you might change after several months of use?

[@bstanga]

+jfpinkston Well yes on the improvements, After building 4 form 1's this monocore design is not the most efficient, however it was the easiest. The best one are K or m baffles with just 60 deg cones. good luck and thanks for watching.

[@jfpinkston1]

+Brian Stanga Ok. Thanks. In your experience, do you think a steel blast baffle in front of aluminum baffles would hold up for 300 BLK/ .308?

[@bstanga]

That is correct, I shoot 300blk since it suppresses so nicely I hunt hogs . 308 and 556 might want to go ss or other non aluminum baffles

[@jfpinkston1]

+Brian Stanga roger that. Thanks! Keep the vids coming...good stuff

[@douglasthompson2740]

Was the core magnesium as well? Doug

[@bstanga]

+Douglas Thompson 6061 AL doug

[@shanek6582]

I see from your tuna oil can you're also a fan of mrpete222!!

[@bstanga]

+Shane K lol anyone who make a chip knows Tubalcain aka mrpete222 thanks for watching

[@shanek6582]

Of all the different kinds of baffles you've tried out, which one have you settled on being the quietest? I just got my first old lathe and one of these days I'd like to get the proper ATF paperwork and make my own, I need to learn about the lathe first though, that's where I discovered you and tubal Cain.

[@bstanga]

well I would needd to know what you are shooting, all mine are 556 or 300blk never made a 22lr but that aside k baffle, then cone then monocore. thanks for watching, start making some chips and be careful.

[@nathandean66]

Like to have one

[@davidpresley3084]

cant hear a word you are saying.

[@davidkinney9390]

What brand mill is that?

[@bstanga]

Birmingham

[@jerryc3201]

do you sale any of them you make?

[@bstanga]

No, they are just for personal use. thanks for watching

[@Snozzelquaf]

Your turning way to fast for the 3/4" dia. End mill.