Titleblock Template Creation for Layouts Video 2 of 2

[@gregjohnson1872]

I have watched a couple of your videos and I will continue to learn from you. I love the fact that you are showing us when things don't always work out just the way you thought it would. These are things that will happen to us and it is good to see how you resolved the problem. Thanks!

[@stevefreant2521]

I have been watching videos nonstop about title blocks with no luck.....THIS VIDEO WAS FANTASTIC! Thanks so much!

[@davidfortescue1958]

This is a great video Tom. In 30 minutes I have learnt something so unbelievably useful. Thanks for taking the time to put it together!

[@ronholtz11]

Tom, thank you so much for clearing up a grey area for me! Your videos really helped me.

[@nigelnovak3096]

Thanks Tom, great explanation of all your steps. Makes it really easy to learn so much appreciated.

[@Bluenovember2011]

vERY CLEAR VOICE AND VERY METHODICAL. tHIS HELPED ME ALOT. OOPS I FORGOT TO TURN CAPS LOCK BACK OFF. HAHAHA

[@BADNCKT]

Greetings Sir.I would like to thank you so much for your kindness.Allow me to say this ... my professor couldn't make it simple like you did, so the class could understand it.You are a lifesaver.Keep up the good work thank you again.

[@higg8039]

Great video, helped me through the process of using an existing drawing layout in new drawings. Thanks.

[@robertc.campbell756]

Tim Singer has a very clear voice and the tone is awesome for presentations on KZbin. You are organized and your instructions approaches the sub matter methodologically. No misunderstanding is allowed the instructions presentation.

[@Mgrtravel]

exellent tutorial. better than the teacher I used to have. Thanks a lot God Bless you

[@TheAnvilMan]

Thanks for this video. Your explanations on each step are very clear and it's just what I needed.

[@SaintChesty]

Great Info. Taking intro to CAD now and your method of title block templates is going to be a huge time saver for the course.

[@365daysinparadise]

these two videos described what I was looking. Thanks for that!!!

[@Citizen_pkm]

Thank you Tom Singer! That was a very useful class.

[@kunalgangaram4572]

Wonderful explanation... Really helpful...

[@imransoftage7785]

Really awesome work I have been worked alot for title blocks this is great thanks alot

[@journymn]

Thank you Tom you ,a resourceful video .Always wonder how I could create my own title block template .

[@clinnanwilliams9680]

Thanks Tom, I just got my certification for CAD but need some refreshing.

[@HighFallCloud394]

Amazing! Very well done. Thank-you Tom!

[@KiR_3d]

Good explanation, Tom! Thank you very much!

[@Ebrahim6000]

Thanx a lot, very useful, I learned something New, with your right click to choose a template

[@qznelectricalbuildersco.7763]

thank you Mr Tom Singer,,its really helpful..GBU

[@Coffeeonbudget]

Thanks for the video bro saved me from failing my Exam lol......

[@memetozbay3688]

Nice Work.........

[@streamingsmng8111]

well explained sir, thanks for uploading

[@TheYatar342]

Mr. Singer, I love you. You...are...so beautiful to meeeeee. Can't you see! But seriously ur vid really helped me, THANK YOU

[@Dan645ci]

Good work and very helpful, thank you.

[@letsdotheklinsmann]

Unbelievably helpful, thank you very much.

[@baolong0430]

Hi Tom. Thank you so much for the lession. I have a question for you: After I scaled my drawing in viewport to 1"=10', ALL the dimensions in the drawing disappeared. The only way I can make the dimension visible is print not to scale. Please advise me how to print to scale but STILL have all dimension visible on the drawing. Thank you very much again!

[@rivalicon]

The way you explain everything was so simple. I hope you continue to make AutoCAD videos. Thank you

[@Msguribhangu]

great job sir #respect

[@arkwaqas]

Hey there, I am working on this project in AutoCad 2016 and I made two layouts, one is Plan and another one is Elevation. Paper size is 11'x17''. I need to lock the scale to 1'=1' for Plan view while the elevation need to be set at 1/2"=1'. The plan layout just worked perfectly according to the scale but now I am getting a problem with the layout having elevation view, the 1/2'=1' is saying 4.17% which is really small. What am I missing? Could you please help. Thank you

[@AlisonHayes]

Great tutorial, easy to follow.. Thanks

[@chandararanget7879]

thank for sharing what I really need

[@faronpeters8613]

wow that was great .....thank you😎👍

[@jamesbielecki2938]

Tom, maybe you can answer a question I have or point me to another of your videos. I started using SSM and have figured out the title block fields including revision level. Is there a way to revise the paper space tab number to use the same information the title block receives? i.e. Using 01 as a tab number. The title block has a field for revision. SSM has the custom field set up and you enter 'A' for a first revision. The block updates with this information, but my tab still reads '01'. I would like the tab name to also index to '01A'. Thanks in advance - James

[@janlee3194]

very useful thanks a lot sir...

[@jmpinotm3629]

woa !!!! i really like it

[@joerafalik157]

Great tutorial!

[@rahul64885]

nice job !! keep it up..

[@rbeldua]

that wasnt a viewport error, its a glitch from autocad it takes time to load it, just type re for regen it will show up. nice video thanks

[@zidanr1]

Fantastic video! Thanks :)

[@mechanic3d]

thanks tom great upload

[@younusmohd60]

thank you is nice video sir

[@chuonbunheng3573]

Thank sir for your useful video.

[@josephmckay3471]

Thank you so much, That really improved my workflow :)

[@Hvane123]

Hi Tom thanks alot this helped me to solve my biggest ussue, It was great!!!!!!

[@sukh0229]

great video, learned lot from this video

[@rogerkayumba6068]

nice one

[@smithlandel]

Thank u very much, grate video

[@lawrenceescovar7603]

Thank you so much Tom I have a question concerning AUTOCAD could you please assist me. Thank you.

[@TheLolobritzitaful]

You are the best!!!!

[@cheontop]

Thanks for this!

[@hisolavincent1953]

Thank you so much!

[@chrheae]

THANK YOU Tom Singer!

[@johannmarais8079]

THANKS! that was awesome

[@mtumzurigoodman720]

show us how to print all that from the model space with scaled title block

[@arianleon5682]

Thanks for this video. I need a little help here. In the step described in at 1:24 to put a viewport in, when I clicked on the view tab, I don't have the option to select a rectangular viewport. What I have is Viewport Configuration which is disabled and on the bottom instead of Viewports like yours mine says Model Viewports. Thanks in advance for your help.

[@DanielAnthonyHoward]

Arian Leon Hello Arian, i had the same problem as you... I went to the "Layout" tab (AutoCAD2013) and used the rectangular. Link helps a lot: autocadtips1.com/2012/04/01/autocad-2013-paper-space-viewports/

[@dianenelson5179]

Thanks! so much! life saver

[@TherealEddieC]

The best!!

[@RianoTjo]

Thank you this really helped me.

[@tomsayarath1025]

Thank for your help full .

[@mostirreverent]

how do you link the text "Scale 1:1 with the drawing scale, so that when you choose a scale, the text will not say what the scale is (in this case, 1:2)?

[@aloshyjohnson7209]

when clipboarding the size of drawing become very large how to fix it ?

[@LOADING...o.o.o]

This title block setting up is like a kindergarden level. Can you teach us how to set up WITH attribute and block?

[@anilkumarmariyappa]

Thank you :-) its was great !!!!!

[@mostirreverent]

so the size of the viewport in the template file does not matter?

[@sukusukuthan]

great am looking for it .......tks

[@Mo-sham-mad]

Why not just input 0,0 ENTER when pasting the title block to the layout? Why not just copy the first Layout with the A size paper for the B size? Why stretch the title block? It is better to just adjust the printable area of the paper in the plotter.

[@rqgravador]

Thank you very much kind sir.

[@lindsaygoodman4056]

Hello, When i go to plot, everything appears except the text I have written in the title block, why would this be?

[@TomSinger1]

Lindsay, it could be several items that cause that. most common: you have placed the text on the "def points" layer or on a layer that is turned off to plotting.

[@starrys26]

TQ SO MUCH!!!!!!! LIFE SAVER!!!!!!

[@engr.viliag.3750]

THANK YOU

[@TheHonchoofAllSpearheads]

dude u forgot to show us how to insert and scale logo!

[@ilyastoutcourt918]

thank you

[@38jonda]

Tom singer... thank you so much : )))))))))))))))))))))))

[@irishaquino6630]

thank you tom

[@rootbeer666]

A good AutoCAD title block has auto-populated fields, like page numbers. This is not it.

[@EnnTomi1]

da captial fk up is just so hilarisou

[@MishikPro]

So, what happened with that viewport? ))) It is weird!!!

[@behrouzrahdari]

Thank you for good explanation

[@meghaj]

This video also will be helpful to you. (How to make a Title Block - AutoCAD Tutorial) kzbin.info/www/bejne/eafUfaekfs-nrLM

[@27chk]

dimensions disappear when you change the scale of your plan from the original scale. Check this tutorial for clarification. Good luck with your work. /watch?v=SihSQByuD6I

[@dillonpotts2251]

viewportception o.O

[@romeojr.dacuno1780]

hahahaha

[@nandodenandos6957]

horrible work!! no standard work for serious engineering in EPC companies!!