TJ is TURBOING His ECOTEC Holden VS Commodore Drift Car!!

Nothing like throwing a big turbo on a mang machine! Today we check out what TJ is doing to his Holden VS Commodore! He has gone drifting 3 times and has now decided that he needs 400kw, the best way to do that is to chuck a turbo straight onto the Ecotec and let it mang.
Merch that doesn't suck! - www.keepitreet...
Enjoy!
#KeepitReet
Head to Keepitreet.com for more Info / Merch / Stickers / Giveaways
Use Code "SPICEY" for 10% off our Merch
Support the channel and become a Member here for only $3
/ @keepitreet

[@jdsbuilt9651]

Oathhhh up THA VS

[@ethanarthur6996]

Im actually so keen to see this build 😂👌

[@damiengehringer1962]

Doing the same thing pretty much, I was told you can’t get the chip tunes anymore and have to get a haltec ECU to run the E85..could be wrong. Keen to see the progress and finished product 👌🏼

[@4x4andfishing]

They actually came out in America with a turbo in the Vn to Vr bewick 3.8

[@needmoreboost6369]

I daily a turbo Ecotec on stock ecu with a l67 memcal from mace! It runs low 12s at reasonable mph and will run with most bikes! and only using 42lb hr injectors at 100psi on 98ron plus some octane booster and have used 26lbhr injectors at 120psi up to 20psi boost on the original memcal it’s also run methanol with original ecu and 65lbhr injectors and 30psi boost, it’s biggest tuning requirement is fuel fuel and fuel! And air temp sensor placement is a way to drop timing,it’s easy just using pressure to control flow! and an fmu is the cheapest dirtiest way around it with a heap of fuel pump!

[@damiengehringer1962]

@@needmoreboost6369 is there any more info you can share about the way you’ve set yours up might take some inspiration from you.

[@baggedandblown]

@@needmoreboost6369 ^What Damien said, got a banger VS Auto wanna throw a ebay turbo and memcal tune on it for a laugh

[@nxth_au9614]

Nice mate. Now to wait for the explosion vid and the engine swap🤣

[@RKGarage]

TJ needs to hit me up.. if you know... you know!

[@womblingaround]

Yo tali heat the edges of where you weld with an oxy/acet torch or a propane torch from bunnings, it'll burn up any oil In the pores of the alloy then get the soot off with a wire wheel and itll weld heaps better 👍

[@corza217]

This is so good. Currently turning my eco commodore into a drift car and shall be taking it to Calder hopefully this year👌🏻 see yas there

[@ZacBaldy]

Keen to see the Evo Hand-Me-Down Build take shape 😉😂

[@theskorpiqn3789]

I just rebuilt a semi forged high comp high lift ecotec. Sounds like a V8. Just need my ITB manifold set up now.

[@T1M083]

get on to Dane from corn-fed boost. this is up his alley

[@cornfedboost]

He has done one or two I think 🤔 😅 thanks man 😊

[@GingerKidCustoms]

Oooof, ya know what they say, "Never late in a 3.8"

[@dazzanzl]

What's up with you guys and tryna choke it with a 2.5 let it breathe man

[@jusihya2004]

its not hard to get a camera stabilizer....

[@WaxedMerkin]

Emotec

[@danielsimpson2748]

Cool. I run a s2 Rb25det in my vg utility over here In nz we about to put it back on the road, kazz 2 way diff she was always fun to drive and now it's forged hopefully make big numbers.

[@harrypatt7708]

If you blow up the eco chuck a 253 with a turbo, they rev out pretty well & sound good especially with a turbo. 4.2 so could use the same turbo

[@Smeeagain22]

needed to use the buick

[@timdijkman1709]

And so it begins, the dirty mang gets some love on keep it reet 🤣

[@thefox6324]

Finally a vid so i can do this to my vs

[@Tonyfc3c]

That thing is freaking sick !!! Wtf hell yea!!!

[@Troymans79]

look its freddy murcury

[@trentmorris9466]

Eco go WUN DUN DUN DUN DUN

[@13illyxmaze]

I think a lot of people will really want to see this build

[@jyewhitney8456]

Candle wax on the cutting disc 👌🏻👌🏻👌🏻

[@happydaze4213]

Yewwww keen as

[@Charles-gl7jo]

Yes

[@Lukeaus420]

I did this with l67 chip from mace and l67 injectors, tune sorted!

[@cornfedboost]

That poor getrag 😅 or t5 🤔

[@needmoreboost6369]

What would you know?

[@ethanrayner8408]

FUCK YEAH UP THE VS! WE NEED MORE VS CONTENT!!!

[@luke_james]

9:11 yes thay do it makes Luke warm for extra spice. 🤫

[@brodygrimes1862]

We Need a series on tj

[@luke_james]

Ecotec's are actually the better sounding Buick v6 with genie headers. I wonder how one would sound with them fitted up with a turbo setup?

[@CliffB5A4]

Commodore's should of came standard with a defective vehicle plate beside the vin in the windscreen. 😂 Watch the top of those plenums I've heard people say they will pop the top off with some boost, maybe just weld the cnt. GM had turbo Buick motors in the USA.

[@needmoreboost6369]

the plenum could be a problem? Maybe a backfire with spray but I run 2 bar boost on stock plenum with no issues!

[@CliffB5A4]

@@needmoreboost6369 cool, I've heard people say it has happened to them. 🤷🏼‍♂️

[@robertgillin]

hell yea up the ecotec

[@DvsCxnt]

tj seems like a rust player whos good mates with ser winter and benny surge with the snowball phrase

[@vscommodore2646]

Will need more

[@SirRamone]

I need to do this to my VT !

[@uncletobyzoats598]

That’s a big stock turbo for a falcon wow

[@Trikk57]

Someone give TJ an iPhone or gopro when he's doing selfie shots... The shaking is massively non kang

[@s4ss.m8]

I wondered where you got that turbo 🤔🤣

[@tturi2]

I want to put an au vct with au subframe into my ef, kinda a similar thing to this maybe? haha

[@shaneanning180sx]

Thats cool

[@jc6806]

Mang mang

[@jamesmariner3547]

Y u didn't slap the l67 in it

[@adam_vswags]

Yeee the vs

[@YehYeh-i4c]

What’s the chip called

[@RagdollRacingInc]

Hahahahaha fk im dizzy from the camera

[@shaneanning180sx]

Yeah thats one thing wrong those wasted spark coils and the stock limiter is pretty shit haltech would be nice with ls coils but yeah money

[@Evil_Mick]

Jesse is my favourite anime character

[@richardpeitaDRIFT]

Shooooo doo doo dooooo

[@bobbybluntrock8928]

How much does petrol cost over there in Texas it's about $2.70 a gallon.

[@andrewkirtley6565]

About $10 US a gallon, hence smaller displacement motors.

[@Aidoooon]

might lose some power keeping the stock exhaust

[@needmoreboost6369]

The stock Ecotec muffler’s run out of flow around 250rwhp

[@benjaminshort6520]

What it get a sticker for 😂

[@nickthelebo]

The legendary buick v6

[@HeartLessGem_]

Ecojet maht 👌🏾👌🏾

[@tturi2]

if legendary was 1/legendary

[@thewraith6360]

Swap a vortec 4200 in it!

[@gageburns2263]

Your ecotec is NOT a mang. Buicks are the one and only mangs.

[@TomMelling228]

Ooooooft

[@sampritchard3350]

Dunno what he's on about, Eco's sound heeps better than a barra

[@definitionmedia1130]

That is true.barras sound like a duck farting into a puddle of water 😂

[@crf450rl]

You two need hearing aids

[@victorwilks88]

Hello guys 😮

[@peterclark4175]

Not a bad way to spend 10 thousands dollars 😂😂😂

[@needmoreboost6369]

10 grand on an Ecotec and make 500hp reliable and responsive! Or spend $3000 and have a 500hp grenade

[@peterclark4175]

@@needmoreboost6369 just send it to the moon

[@vaskodimoski5690]

You can't make a reliable ecotech unless you use it as a boat anchor

[@l.a.b.louiechan7317]

What a Tosser Sloane

[@sly_nz9521]

🤙

[@vaskodimoski5690]

Down grade of the Buick . I replaced one of these under warranty in 1997 with 50k burnt oil due to terrible piston ring design and a spun cam bearing then 70000kms the replaced engine went as well garbage design one of the if not the worst engine put in a Holden commodore all they did was shorten the piston and claimed it made it more economically hence ecotech

[@asphalt4life572]

Thats a shat v6 .. Send it

[@Xav.]

Ecotec>intech

[@brodygrimes1862]

Frothing

[@jarrodvhcommodore89]

Fat. Love this an the vls