Turbo'ing TJ's Ecotec VS Ute Part 2!

[@lmc7233]

tjs got a personality on him the funny fella haha

[@williamabraham6349]

Turbo Holden DOSEE ! OWWFFF ! Young TJ is Good on the tools, impressive welds love ya work ! Well done brother. Keep the TJ Content coming, I'm looking forward to seeing the apprentice do some SKIDS !

[@StavTech]

TJs gay rapist moustache is top notch, that's always star of the show.

[@RKGarage]

T5 will be fine, way stronger than getrags, just don't dump the clutch in 3rd. Also rods and pistons will be fine, stick to 8 degrees at peak torque and taper up to 10-12ish. Keep afr's around the 11.2 at peak torque and 11.5-11.7 up top and it will live forever without smacking limiter 👌 15pounds should see 430wheel all day on am eco with a gt35. Will be a weapon in a VS 💪 Also I wire haltech's into commodores a lot, can send you guys a base map already sorted for boost 👌👌👌

[@butters_]

👌🏻💯🔥👌🏻💯🔥👌🏻💯🔥👌🏻🤘🏻👈🏻🤙🏻💪🏻🤙🏻💪🏻🤙🏻💯🔥💪🏻💪🏻

[@centerlink7330]

Are T5s know for blowing 3rd dumping the clutch I’ve had plenty they love dumping the clutch only go when they get tired

[@RyanKiiing]

Loving the build man ❤️ can’t wait to see your car sitting on jack stands at the track 🥵

[@FentyEnjoyer]

violation

[@RyanKiiing]

@@FentyEnjoyer I actually love tj I’m just talking smack 🤫

[@amounifnd]

Those pipes look great. Wish more companies provided them off the shelf. Well done on waking it up :)

[@dopamine-clothing92]

My 5litre t5 manual box was running a LandCruiser slave cylinder back wards on a custom welded mount with r33 pedal n master cylinder

[@dopamine-clothing92]

No cable bruz

[@thorvonfalin9975]

ebb, finally a new vid from the kir creeeew. always looking forward to your uploads. youve gone to my favorite channel in all of the toob

[@masonbultitude7918]

Finally god’s engine 😈

[@rheser]

Question: Why didn't you twin turbo the v6 instead, wouldn't have there been less piping to fabricate ⁉️

[@rushking19]

Would of sounded better too vs the un equal y pipe to make it single

[@howesyaadventures5542]

Lovin it TJ. But donnnnt carreee haha keen to see it finished

[@TomMelling228]

ill put money on gearbox lasting longer than the rods

[@needmoreboost6369]

It’s going to be a fun car! I love my vs ute it’s a great thrasher!

[@Ghostchocobo]

That dump pipe looks like a motorcycle job. Just call it akropovic hahaaaa

[@Smisky]

funny mans back

[@CuzMan1]

Backlash at the diff looks more like the tailshaft bolts are loose?

[@jamesferris7677]

One of the best Holden s on KZbin up the Holden ❤

[@SlaterGator]

What a nugget! 🤣 I love it!!

[@williamabraham6349]

thats not a nice thing to call your mother.

[@RagdollRacingInc]

We all Reet truuuuuuu 🤙

[@equakecs8119]

I'd love to make my VR turbo would be mint for a drift car

[@stuartbarnden4790]

Looks like the build is coming along nicely, loving the coverage of all the Reet cars. On another note, my daughter (5) and son (7) also love watching the drift and build videos. Would it be too much to ask the editors for some *bleeps* or at a minimum a little disclaimer at the start. Love the cars but still trying to raise the little ones right. Carry on the great work boys. 👍

[@rtvzeuz4202]

I've just had to rebuild my suspension on my ve

[@lachlanfowler9470]

that mouth bass booster ting ahahahahahah

[@-Yoda-]

Spooli mang mang nugget build. sick!

[@jayFTP346]

I got a diff for sale if use boys need, just built new bearings, full spool 3.45 gears Come out of my vs ute project I parted out

[@keepitreet]

Hey bro could you dm Tali Sloane on instagram!

[@joz1751]

Did u say 6k deep, do a build total when done lol

[@DatAdz73]

lads!!!!! now come on now!!!! you carnt let that poor kid run that tail pipe, help a fella out lol

[@lmc7233]

16:14 jassy dead

[@thefox6324]

This makes me sad when my vs sedan is off the road from a spin out and smack into a gutter fully ruined the rear suspension so it'll be off the road for a bit and just got new wheels for it so pretty sad right now

[@benwinter2420]

In all honesty I got a severe fright when seen that thin plastic thing on top of gutters front of windscreen VS , i thought here we go , but no it was weight saving like on a Japanese Zero no detriment

[@Rysgarage]

Who did you get the chip off originally as I’m doing the exact same thing to my vy atm and can’t afford aftermarket ecu unfortunately

[@stapy69]

VY is a flash based ECU

[@dannykirby7023]

That's a 3.8l motor?

[@kennyman338]

Fix those exhaust leaks. 😂

[@miskone1044]

that dump pipe is amazing

[@4x4andfishing]

T5 isn't that bad, I went through 6 Autos before converting my 5ltr to manual and the T5 did many drift practice nights, burnout comps dumping in second and also some dumb shit on the road and was still loving life when I took it off the road

[@joz1751]

Depends on clutch but he's gonna be pushing double the 5l HP, I had similar experience as you tho, T5 did me well

[@4x4andfishing]

@@joz1751 I've been told they can handle 400hp if you don't smash through the gears, but I suppose what is the fun in that

[@peterclark4175]

That dump is spicy restricted

[@umad596]

HELL YEAH I FEEL DAT IF AINT ONE THING IT ANOTHER HAHA

[@benwinter2420]

Up there podium best cars on planet

[@josephrepecki3777]

Tj aka Bernard Foley

[@dimiti-leebella8130]

When next part of this series doe🤷🏽

[@keepitreet]

Next week!

[@JakeMegee]

Need more uploads asap lads 🤙 truuuuuueeeeee

[@destrupt2787]

Yeppp lessgo

[@justincanny1571]

hahaha T5 wont last long axles and rods will be fine lol

[@05DoitforBrock]

👍🇦🇺 mang mang gunna go bang bang

[@CliffB5A4]

💥💣

[@declanallen3634]

Where's the next video boys

[@Evil_Mick]

Would you believe me if I told you, Jesse is my favourite anime character?

[@the33l1ne6]

Message those winginit motorsports guys. They love messing with ecotecs.

[@Scout-xw1uk]

TURBO MANG

[@adamjdm4132]

Coooreeey

[@tance1002]

Kirrr

[@victorwilks88]

Oooooooooft 😮

[@burnoutkings183]

T5 is better anyway

[@haydendraper5547]

Tj gone bl***

[@marshallb6492]

First

[@CliffB5A4]

Nope