HOW TO MOLD A HOODSCOOP

[@chiefgilly.7729]

Wow, your body work makes me feel allot better about mine! Thanks

[@vitobarbagallo4354]

Lmfaooo 🤣🤣🤣🤣👍

[@CrowdControl123]

The "customer"... wanted you to fill the body lines... with Bondo... on the hood... that gets hot... then cold... and slammed... I'd love to see a recent picture of that job.

[@ForcedFalcon]

You should seriously remove this video...Fiber glassing over slightly sanded clear coat, using body filler to fill up deep body lines, sanding the primer with a scuffing sponge rather than blocking by hand..And worst of all you can't even mix body filler properly! This is why so many panel shops have such a bad reputation and ruin it for the rest of us.

[@autoemporium1]

ForcedFalcon 100% correct

[@drippaintz1555]

Agree

[@a-75n5lee4]

Oh wait I know he left most of the clear coat a a release agent because that's exactly what will happen when the bondo comes off

[@nicktubara]

you gotta love the guy's taste in radio music :) and the hood looks great.

[@venomhemi3914]

sounds like 70s Kungfu movie narration, which is awesome! Thumbs up!

[@coltonhoy314]

The songs playing in the radio take me back in time, feel like 8th grade again.

[@odzmaker]

Title should be "How to ruin a perfectly good hood"

[@airsoftscientology8885]

Holy Christ the songs on the radio are giving insane throwback vibes

[@gladememmott3001]

Was this a parody video??? That old man absolutely reeked of shame and disgust of whats being commited in the body shop LoL 😂😂

[@zerozero3304]

people lie on their titles just to get a view ....the title is how to mold a scoop not how to improve looks but yeah its great stuff i finally see ....good video....

[@killersushi99]

OMG! This whole time i have been using bubble gum to mold on stuff!! Great Video!

[@Bleepstick]

Holy shit .... just added 800 lbs to the front of this truck !!

[@eddiebarrera469]

Not bad at all,looks like some folks are clueless on how to do this kind of work.99 percent of body shops do it this way.

[@wayneatkins6053]

WOW!!! I learned something from this video DON'T take any of my vehicles anywhere near your shop. I lost count trying to keep up with the mistakes that were made from the very beginning. Dont know how many brain cells died watching this

[@dreambeliever3652]

Straight forward man. Loved it

[@tommytomtomt]

question at @1.00 ....why did u not put glue under the scoop? just along the sides?

[@EqDior]

That looks fantastic!!!

[@hectorramirez1808]

Looks grrat, I just bought one for my Dodge Ram. Can't wait to see how it comes out of the body shop. 😍

[@Eye_4_An_Eye]

u have opp playing in the back. that deserves a sub!

[@brandonrayner5253]

This gave me a good idea for my 96 cavalier, but I plan on sanding the entire hood right down

[@johnnycashh7148]

Had to watch to the end...kinda like the Not seen on TV vid back in the day.

[@BJWTF]

the plastic to metal bonding glue, which exact one did you use? im doing similar but with a spoiler

[@luisito6972]

i like this video, i wish that ur shop was close to my house so u can put one on my tacoma. i love ur work.

[@ssturwold84]

i feel dumber now that i have watched this

[@fearofchicke]

this was the funniest thing ive seen in a while.

[@stevtabares1]

you never pt any bonding agent on a painted surface, the hood should have been bare metal and the adhesive would be placed between the scoop and hood bult up with fiberglass and sanded and refilled with fiberglass and then duraglass and very little filler,and a hood still might not last a very long time because of flex ,heat and slamming the hood

[@jerseybean59]

the last time I smoothed in a crack with my fingers I got a slap!

[@svtt-bird7571]

Came out actually reall really good . Good job

[@greggibbardo9492]

one of the best hack jobs I ever saw

[@chrisiden1]

lol, i purchased the exact Westin large hood scoop for $60 at Summit Racing in Nevada... all i did was peel and stick it on, polish it up with Meguiar Final Destination and it was ready in under an hour and gorgeous... i could see doing all this work if the hood scoop was functional... its just an Ornament decoration... but to each his own... he did a good job at what he wanted to do... anyways... the beat goes on........even though he forgot to put mesh in the scoop intake...

[@freddyvelazquez47]

HI, just wondering, do you think by opening and shutting the hood , will the bondo that you used to smooth out the hoof\d will ever crack ??

[@MaxQscience]

looks ready good ! you know what your doing

[@jasoncook4008]

What is the name of the plastic to metal glue that you used for this & where can I get some of it ?

[@williamh.8984]

Why would you do all that work and NOT make the scoop functional??? FAILED!!

[@gladememmott3001]

No shit 😂😂😂😂😂

[@KevinHarrington55]

With the time and labor to mount this scoop, I feel it would be more cost effective to buy a cowl hood.

[@Nate6133]

I’m so confused, he molded a hood scoop that was already installed on the hood. Lol. What is happening?

[@lostfound8112]

lol you changed a dodge hood to a wrx..congratz!lol (dont get me wrong i love my wrx) i actually flinched when you started sanding on the snazzy newish hood ha. nice finished work tho and good video flow for tutorial

[@frankieboi1]

GREAT VIDEO! one of the best tutorials ive seen on here in a long time

[@neil7741]

I just found this, wow....I don't know what to do, laugh or giggle like the other 33448765278 people that has seen this? I'm flying 30tho feet in the air on my home and can't stop laughing lol. What you have seen, can not be unseen.

[@AntLudbrook]

i quess thats one way to do it...? Hows it holding up though?

[@RYDENROAM72]

i would say a few words but i wont. i think alot of you had already said it. i live in hawaii and believe it or not you may think we are dumb in body work but this would be a waste of time for me to do on my truck. im no out there for only looks. im out there for looks and the performance, if i am going to spend that much money for paint, bondo, glue, resin, and fiberglass not to mention the time and effort, yea i would make it work for what it is made for...PERFORMANCE.

[@MrWatchumean]

End result was a good looking scoop,why did you go through all that trouble if it was not going to be functional? Good job regardless,I would of just made it fuctional,helps dissapate all that engine heat...good video!!!

[@thunderbirdizations]

elio guetzbusy lol this comment "Dissapate all that engine heat"

[@mikewebb9753]

hey man I really like your hood project.can you please tell me where to get the plastic to metal bonding agent

[@davidbryant5875]

10 years ago lol working on a blazer that someone finished halfway and didn’t sand. Got my work cut out for me

[@THOMASTHESAILOR]

How many hours work was that. ? Seems like way too much glass and enough bondo to sink a battleship.. But, it looks good in the rain..

[@speedmongrelZ]

Just gave Forced Falcon a thumbs up on that

[@351cleavland]

Final product looks nice.

[@marcaliventialiventi765]

Did the scoop finally come flying off?

[@MrJBumer]

You should rename the vid to - How NOT to mold a hoodscoop.

[@imburg1]

LMFAO! Shit job!

[@blocka222]

Fucking ROUGH AS GUTS!!! LMAO

[@reowhite4862]

No doubt!

[@Rahmankhan-yh5fi]

Sax is .massasszges to, but

[@PawlDunken]

Damnnnn that's dope as hell! A fake scoop made into the hood

[@SGT74D]

What is the plastic to metal bonding agent that was used? and do you know where I can get it?

[@titan371]

Bad assss,,,,, people just hate

[@garethellor410]

why did u fill in the vent?

[@coolrin1]

i like how you got right into it,,,

[@nosjet]

great job fellas!! although there are others that do it other ways ,but cant see why they get so pissy about it ,a good job well done,have seen allot worse .. cheers

[@martinverner6791]

nice wooork how long didi it take

[@MRIGOTGAMEII]

at first i was like wtf but it actually turned out great... i would have cut an opening in the scoop to give the look of a functioning scoop

[@andBefore-dn8yv]

I can't tell if this is a joke or not.

[@ProseLitigant]

its a lot easier than this dude you made a lot of work for yourself

[@BrokeLogic]

How long did this take?

[@richburdick9279]

that filler looks kinda thick filling the body lines, why not use duraglass first?

[@willmarsden7657]

I'm no car person, like at all, but that entire Body Filler segment made me cringe.

[@RobertNeeb66]

I think it came out lookin fuckin nice

[@zee-lv4jh]

LOL !!! Dude your fired,,,,,and no,, I ain't payin

[@prometheus9672]

where did he get that vent?

[@MythTracker]

I dont get it? with all that time you spent doing that work, why didn't you at least cut out the under part and make that scoop do something useful. And if you where just going for the looks, I think its easier to just paint the scoop and then glue it to the scoop or use that real thin double sided tape. IDK I think u could have done alot better. But good job on the paint. It looks good, and smooth for real. You should put some black grill on the front under lip if you arent gonna cut the hole out. Like that it looks like is there for something.

[@reowhite4862]

Cuz he was too lazy to take off the scoop

[@stevecvntniko8271]

looks nice. thanks, CVNT

[@aleperez4271]

Can u comment all the stuff so I can purchase them to do it

[@gladememmott3001]

It looked ok in the end but thats a ton of filler thats gonna shrink and my guess crack fairly soon.... Plus its non functioning properly so there's that.... This is definitely not a how to video LoL 😂😂😂😂 🎉🎉🎉

[@SesameStreetRacingChannel]

Title should be: "How to mold a hoodscoop in 1978"

[@lkirkp6468]

That’s some nice girlie dance tunes in the background.

[@chewiepac5932]

I laughed so hard 😊

[@reowhite4862]

Says use metle to plastic bonding agent but puts it on paint.....tell me again how this is going to stay together

[@jakeeus]

Wow, every single technique used in this video is absolutely horrendous.

[@inkedinRl]

First time you slam the hood...crumble

[@Bleepstick]

Specially the 1 1/2 " thick bondo he "Smoothed the hood indentions" with is going to fall out all at once !!

[@mattsez2879]

i wouldnt let this guy wash my car, much less do a hood scoop......might have just as well made the entire scoop out of bondo and thrown it at the hood from 12 feet away

[@fbchoppedupmexikann7034]

Why didnt you just use the plastic to metal bolding an filler..?? I think it came out alright.. I noticed at the end u sprayed water on the hood lol

[@zfamgaming2120]

Please tell me this video is a joke? i wouldnt do this "quality" of work to my worst enemy's car lol " smooth as glass" if glass has hell of ripples then yes he nailed it haha. i dont normally comment on videos but this was almost unreal lol.

[@nelsonalexander916]

looks good but what about the quality

[@chriscorin5780]

oh my gosh I just seen you drop the metal lid onto the bonnet and my jaw dropped. You obviously dont do this for a living.

[@lisespinoza7613]

Kagaron ese capot, con mucha masilla la cual se rajara con el mismo calor del motor

[@HellofromAustralia-s8h-juan]

No bake?

[@jasonbutko875]

"And then" you go on your 1st ride and watch the scoop fly off the hood. You could have elimited 5 unnecessary steps. Had you cut the hood and out the scoop on from the inside. So it doesn't crack and fly off. Not to mention, all of that filler that has absolutely no tooth and bite, because you overlapped on clear coat and paint.

[@hemi08911]

That scoop won't fly off at all. It has 6 bolts underneath with lock washers and nuts. I have the same on my older charger.

[@nathanbennett9025]

10:15. why would you tape it off. it will take a few mins to just take the whole Grill off

[@speedmongrelZ]

Let the sanding begin!!!

[@lowlyknave4975]

I read the comments before I watched the video and I thought people were being a tad bit hard on you. Now that I've watched the video.... Naaaaaa....... I would be pissed if you did this to my hood.

[@jessehasadream]

oh my lord. you're fired.

[@joshuacerini7631]

the only reason this guy didn't take the video down with all the comments that are being is because he died shortly after making a rama wearing nothing but a bandana well breathing in all this stuff! Step one for all the resin I own on the hood, Step 2 poor all the pancake mix, ( body filler) I own on the hood, step 3 cook till done

[@WTFisjuice1]

well i wanted to do this to my 04 lancer, but because i actually wanted cold air to be funneled over the aftermarket ram air intake, not this shit...

[@mikefolchetti3393]

I DONT THINK SO!METAL AND FB EXPAND AT DIFFERENT RATES.YOU WILL SEE A BOND LINE IN THE PAINT!

[@colemeyer7894]

thus the plastic to metal bonding agent

[@noemqz5626]

cole meyer ?

[@colemeyer7894]

noe blanco what?

[@roberte.3541]

what planet are we on I think I was morphed off to another planet while watching that what a mess lol

[@russelblackwell6041]

Man you created so much extra work for yourself you could of even masked of the area where your applying fibreglass etc anyway it's all about learning I've seen on youtube different ways even using reofill to attach scoop to bonnet then feather out with bodyfiller also wouldn't this cause air pockets between the scoop and where you have applied fibreglass sheets and wouldn't it eventually crack

[@seancherry7503]

but does it work? no! PRICELESS!!!!

[@noblewulf]

I swear one day in the winter the guys going to slam his hood and those filled body lines are going to pop out....

[@jeffreybaker8467]

You wouldnt last 5 minutes in my shop

[@PerfectTag]

Lml, you should describe the actual process for this man, like that he can learn the proper way.

[@jeffreybaker8467]

Yeah sorry for my comment mate. If the scoop is bolted or moulded into the bonnet,sand the bonnet and scoop and apply a small bead of urethane the stuff that holds screens in cars now, its made by sikaflex or bostik,both are good. Sand way past where you are going to use filler or bondo as you may call it,when your filling in the curved sections use a bit of plastic and bend it into a u shape as you apply filler,saves a lot of sanding. If you have many pinholes use a quick set knife on putty as we call it in oz. when all is good prime it with a high fill primer. Rub it back with a block and 600 then 800 and then apply your top coat.10 out of 10 for having a go. I have been doing this for 45 years and it looks easy to you watching me,but hey have a go. All the best from Australia...

[@marchisellienterprise8161]

Jeffrey Baker he would not even be allowed on my shops property

[@MrGumercindo50]

Great job

[@richburdick9279]

isn't it less work to remove the grill?

[@JobeMinacum]

All of that for a non-functional hood scoop?

[@emanuelvazquez0]

Seriously haha I was thinking the same thing.

[@Sodacuhmeeks]

very nice.

[@mcfet152]

ouch, dude you should seal it befor base or clear or even single stage.

[@ManganeseMan]

nice work.