Homemade ice maker build! VERSION 2.0! Cleaner build!

[@garymcconnell7202]

I’m a retired HVAC mechanic and this info may help you increase your production. Each ice machine also has a rating based on inlet water temp. Pre cooling the water down to 40° will increase your production. It will cut the amount of time it takes to chill the water down to 32°. 1-BTU = changing 1-lbs of water 1°F (it takes 144-btu/ pound to freeze water). Your making 12-lbs of ice and if your inlet water temp is 90° then 90°- 32° = 58° x 12-lbs = 686-btu’s of heat being removed to chill the water to 32°. At 40° water temp you would only have to remove 96-btu’s. Also all fans have an air temperature rise across with them. Having the air moving is probably good to keep an envelope of warmer air forming around the ice tray but too large of a fan may be warming the air too much and negating the advantage. I think a smaller fan farther away would give you a better result allowing the air that’s leaving the fan to be colder before it hits the ice trays. These are just my thoughts on your project… all in all I think your ice machine is really awesome!

[@TKCL]

I actually tested a lot of that in the series. I did see around a 9 percent gain in production with chilled water. The issue is the energy spent pre chilling the water offsets any monetary gains. But if production is all you are after it does help.

[@ronvosick8253]

I was thinking of a stainless steel wall the same thickness as a computer fan on the back of the freezer for cold air delivery to the ice trays.

[@holykrap8407]

Awesome input how would you upgrade this build as far as getting the water colder before it reaches the trays ??

[@Salty_Vet]

Have you thought about adding a water filter?

[@TKCL]

Mine has a water filter.

[@bj5843]

A couple things: 1) Thank you for not rushing to put out a build only video. I appreciate you taking the time to do it right 2) Like many others, the original build is what brought me to the channel, but no, I’m not done with it. You’ve brought me a good amount of entertainment and honestly educational information. I am for sure going to build one. But now I have to wait for further testing.

[@TKCL]

Thank you for the support

[@ACO-Amy]

Absolutely, same with me. I'm hooked, love this channel!

[@ericfrance9061]

8 855t8rsrr888rr .. m

[@bj5843]

@@ericfrance9061 I couldn’t agree more.

[@jordanpiesmith]

@@bj5843 oh man thats great

[@danielpinsky7880]

I literally can't believe how much time I've spent in the last several days watching some guy in the middle of nowhere FL make ice! On paper, it would seem as boring as watching paint dry. But it's not!!!! It's frickin enthralling!!! If I had my way I'd lock you in your shop and force you to make ice endlessly for my amusement. I don't pretend to understand it, but there it is. Please make more vids!!!! This is like when u binge an entire season of a Netflix show and then have to wait a year to see what happens!!!! I would fully support a channel where you do nothing other than make ice makers, and ice. No joke.

[@TKCL]

Lol glad you enjoyed it

[@jp34604]

@@TKCL Frozen crack 😄😁😆😅🤣

[@awshick7949]

I could not agree more. I stumbled into the first build, and next thing you know I'm watching the storm shelter build. I like how nothing is over explained or skipped over. I dislike those "diy" videos that show the start and 1 min later its at the end. Its fun to watch someone who's doing something for the practical use but also for the journey of just doing it. I do all my builds 2 or 3 times because I always see where I could have improved once done (or I just really screw up).

[@absolutehellion1768]

Same! I just went down the Diy Ice maker rabbit hole😂

[@StewartLindsey]

I couldn’t agree more.

[@jamespooler8809]

A while back I picked up a slightly used 8' W x 4' T x 3' D commercial deep freezer, I'm thinking about building a wall in it and adding an ice maker to it.

[@holykrap8407]

Awsome always agood thing when we are building our own ... Nothing like the reward of doing it yourself !!!

[@trevorjudd516]

Hey Andrew. I'm a second generation refrigeration and air conditioning mechanic and am currently in my 50th year in the industry. What you have done is simply amazing. Regards, Trevor Judd. Australia

[@TKCL]

Thank you very much

[@robertcasey7312]

Video is NOT too long. The details are what make your videos so damn useful. They’re great. Thank You. Best Wishes

[@TKCL]

Thank you for watching

[@Jacob-kg7vy]

Not sure why after 15 years of working as a HVAC/R technician this is so fascinating to watch but you can bet I’m building one, thanks for the hard work!

[@TKCL]

Thank you for watching

[@rycudas]

You're a scientist mate. The build is great, but it's your dedication to testing, to changing one variable at a time, to actually learning what's going on that makes these truly special.

[@TKCL]

Thank you for watching

[@lengrzyb6510]

Very cool. I am a mechanical engineer and a farm kid. Love the DIY part. Makes me want to build one just to do it….I really don’t need one!

[@TKCL]

Thank you for watching

[@James-sv7gw]

I like your vid. My wife loves soda fountain drinks over can or bottle. Six years ago my first chest freezer Ver. 1.0 I turned into a fridge with an led temp control and used parts from a used soda fountain ... Pennies on the dollar ... Used the stainless steel coils in a water bath that maintained the temp at 34-37 degrees with three soda fountain heads mounted on the lid. I had the carbonator and pumps outside in a closet. She now enjoys fountain soda I can custom the perfect taste as McDonalds. Then three years ago Ver. 2.0 came along to an upright freezer change that out done the chest with no water bath and even easier to control and looks. If you like to hear about it ask me.

[@Onedown5ups]

I rebuild, repair, and install ice machines and I must say this is pretty awesome to watch. You cannot get new ice machines right now they are back ordered and takes months to get even a small under counter machine. Kuddos my guy!

[@TKCL]

Thank you for watching

[@richardcaton7334]

I am simply amazed at how your brain functions. You really think through the whole process and do a great job. I have known a few people in my lifetime that there brain is always thinking of something to do. They only required 3 or 4 hours of sleep and never seemed to be bothered about such short sleep cycles. You really deserved the short vacation you and your wife took. Keep up the videos, because I watch them all.

[@TKCL]

Lol that's my mind in a nutshell!

[@launceherron]

That's I always use to be, but now I struggle for motivation. I would constantly figure a better way to make shit work, now I can't get of the couch. Fucking covid really kicked my ass

[@JMJWill]

I’m in for the house build but I watched your ice build and every video because your content is second to none. Now get the HAVC, windows and doors installed, lol.🙏

[@TKCL]

Lol hvac starts next week, along with never ending electrical 😣

[@LatitudeSky]

@@TKCL But just remember, sometime in a a few months, you will make the very last electrical connection before the house is done. There IS an end. At least until you modify or add something... But you will reach that finish line and we will all be with you in spirit. I already know I'm gonna have to try not to get all teary eyed.

[@TKCL]

Well if it makes you feel better, we do plan on an addition to the house down the road. Plus animal shelters and a ton of other buildings. Plenty of projects coming on the channel

[@JohnMann858]

The view from your shed is absolutely amazing! The tree line and huge grassy field is beautiful! I was totally enamored with your location up to the point I saw that giant bug on the freezer lid that I realized how humid it probably is there. But the beauty of your property is still amazing!

[@TKCL]

We feel blessed to have this place! Humidity, bugs and all!

[@BMWQC]

That’s what I was thinking when I saw the view out of the shop door. Wow, what a beautiful place you have!! I just found this channel, I would guess you are somewhere around Texas or possibly Louisiana? You are a talented, blessed man, nice property,sweet bay boat very cool shop and building your own home. You are living right Sir!! Hope everyone has a wonderful day!!

[@TKCL]

We are in North Florida, thanks for the kind words. Take care!

[@Joker-ig8im]

I was getting ready to comment how beautiful the property was. I'm in Sarasota, about halfway down the state on the Gulf side and just turned 50 and am thinking about selling my house in the neighborhoods about a quarter mile from the beaches and get a few acres away from everyone else. I hope I can find somewhere half as pretty as it is there.

[@cobyburrow9339]

1/2 and gallon milk jugs work super for block ice. Freeze them and insert in chest when done put them back into the freezer and re freeze. Great setup!!!

[@billyreed4625]

That's how I ice down deer; with milk jugs works great.

[@alexanderaccardo572]

The fans mounted on the lid is a great idea. If you have them mounted correctly, you won't even need a switch to turn them off since they'll be outside of the freezer when the lid is opened. I'm right there with you on convenience factor!

[@TKCL]

I'd still be concerned about the fans blowing almost 10p degree shop air into the freezer. I'll put them on a switch no matter what. My gut says I can make more ice for less money. More videos coming

[@azlawcat]

Thanks!

[@TKCL]

Thank you very much

[@jimpie231]

Great video! Your mind is working, thank God for that! Your ingenuity is amazing! Thanks….Jim PS……I bought a Uline at a close out price about 30 years ago. It’s a small office one and makes 25 lbs. of ice in 24hrs. Anytime I need more ice I turn it on.

[@alimuh007]

The sheer amount of research and development of this project is a awesome display of persistence and confidence and I applaud you.

[@TKCL]

Thank you very much

[@pampilgrim2274]

Hi, Andrew! No apologies required for me. I appreciate your dedication to precision and excellent quality on all your builds and videos.

[@TheWolfster001]

Liquid Nails would have been a better choice, That being said, the rest that you did may work perfectly to keep it attached. Only time will tell.. I like the 2.0 version, I see there was lots of thought put into it.. Another Idea I have, would be to build a platform to place it on with wheels, cause on the other one, you moved it around a lot to do testing, this way it will be able to move around almost effortlessly and being higher, you can reach the ice better... Adding a digital thermomotor to the front, you will always know the temperature inside.. I enjoyed this very much, there is a point where you go to far.. A wise man once said "leave well enough alone" I give this 10/10

[@jamesdoyle7317]

American ingenuity at it's best. Very interesting and educational video. Thank you.

[@TKCL]

Thank you for watching

[@henrymartin3044]

Man,you are the king of the ice machine.!!!!

[@TKCL]

Lol 👑

[@JohnDyal-ee6cu]

I'm so glad you built this again from scratch. This one looks much better. You have inspired me to build one too, "IF" I can find the frezer in these wierd times.

[@TKCL]

Thank you for watching, good luck. Things have definitely changed.

[@sharontracy2151]

This grandma won’t be doing anything like what you are doing but love watching what your up to. Always a quality post. All the best

[@TKCL]

Thank you

[@stevecart6913]

Excellent build Andrew. I love the way you explain everything you do during the build. I thourghly enjoyed this video. You have a God given talent and you are a pleasure to watch. Keep up what you are doing and you will continue to grow this channel. Please say hello to Ms. Tiffany and Mr. Bullet. Looking forward to the live show tomorrow night. God bless you my friend

[@TKCL]

Thank you very much, God bless

[@k4x4map46]

Whichever spaceship you getting on I'm booking right now! I know you gonna bring a cooler full off ice and grouper and the john deer in the cargo hold!! excellent work!

[@TKCL]

Lol

[@bobbycresap4440]

I second the fact that the original build introduced me to your channel. I second or third or fourth the fact that I am not leaving the channel at all. I feel like a part of the Kelly Country Life now and no one is gonna take that away. I thoroughly enjoy the house building videos, the firewood videos, the ice videos, the live streams, all of it. I truly look forward to every single video y'all produce.

[@TKCL]

Very happy to hear that, thank you for the support

[@noyopacific]

Who woudda thunk that watching ice freeze could be so interesting & entertaining? 🤣Thanks for the video Andrew!

[@TKCL]

Thank you for watching

[@barbaraharrold5361]

Building this machine not only gives you the comfort of building and the ability to walk to you garage and bagging the ice you need most of all a gage of that size is a lot more then 65 cents a bag:) it also brought you a lot more subscribers which is awesome:) tfs stay safe and God Bless:)

[@TKCL]

Thank you for watching, God bless

[@gssmith1986]

Definitely a cool build & I know the joy of building something like this. Buc-ees in Texas sells ice for $0.99/20#. Probably the best deal going...best prices on deer corn too, but you've got to bring two big coolers to handle the ice. I lucked into a free commercial ice machine. Makes 250# a day. I'm in construction and we did a kitchen remodel and that old machine was replaced. Old one went straight to my deer place and has been a game changer. A few problems, but worked through all of them. When it craps out, I will bite the bullet and buy a new one.

[@beararms3]

Great video! Glad to finally see Version 2.0. Interesting enough that the time length didn’t even matter.

[@TKCL]

Glad you enjoyed it

[@gaylewatkins4685]

Andrew, I admire how you think things through, make a plan then follow through. Your DIY projects are awesome!! Take care and keep on Tinkering. 💡💡

[@TKCL]

Thank you very much

[@erniegroocock4354]

You’re doing absolutely fine stick with your program don’t worry about the haters or the seat cushion experts this is RND It’s very interesting everybody wants the results right now relax take it in enjoy

[@dennisbrown1271]

This is just cool. I live on the river but guess what ain’t on the river, a store with ice. You are so right about the store trips.

[@Andrew-zk4hk]

I don't need an ice machine. I don't wanna make one. But I have just watched and enjoyed 2 clips of you talking about your machines. Well done I have a sort attention span! I have seen 2 videos about a freezer but I'm keen for the next one.

[@TKCL]

Glad you enjoyed it

[@johnfarney5328]

I finally found a DIY on a You Tube channel I'm gonna use. Like you, I have the same reasons for the ice maker. Great stuff! New sub here.

[@wombat1222]

That was a very fast 45 minutes. Long awaited and worth the wait. Not sure why this is so fascinating, I use very little ice in the summer and none in the winter, but I love the process and will miss it when you finish perfecting your ice maker. Can't wait for more testing.

[@TKCL]

Thank you for watching and the support

[@bretdecillis1682]

I just wanna say I love how we all have all this space & we wind up working on boxes & buckets …lol

[@keithbrookshire]

The place I work has a commercial ice maker. In the last year we have spent about $3,500 in repairs. It would have made way more sense to replace it but there was no way of knowing that until we were a few $500 repairs into it. Also, there is no freezer component to it. Basically, the ice is dumped into a poorly insulated cooler with a drain in it. The ice is constantly melting and being replaced. Your ice maker is WAY more efficient.

[@TKCL]

That's the exact scenario we had at my last job. The big name brand commercial machine ls were always breaking.

[@frankandrews58]

Hey Andrew, love your work and I will keep a close eye on your content all the way from Australia.

[@TKCL]

Thank you for watching

[@jbarrer2196]

This is a true labor of love. Best of luck on your search for the best DIY ice maker. It cracks me up as you add all these features; I'm expecting the 4K touch- sensitive control panel in the lid for the next version. I couldn't help laughing when you got to 25:22 and admitted that you were already thinking about version 3. 😂

[@awshick7949]

Version 3.0 should have some rgb lights and a biometric lock to open the lid! Maybe a sound system with the frozen sound track going when open! Awesome video. Not sure how to explain, but I feel like I've accomplished something by you building this lol. I was going to try and provide a helpful suggestion, but I cant think of anything that you haven't already mentioned. Appreciate your video(s) alot!

[@TKCL]

Lol sound system! Glad you enjoyed it it, thanks for watching!

[@brucesumner6993]

Great build and that block ice will be the ticket for ice chests to hold the cubes even longer.

[@TKCL]

I much prefer cubes for surrounding drinks and fish, but properly sized blocks will definitely help extend the life of the cubes. I'm looking forward to experimenting with that next.

[@ericl5973]

Nice build. You can always use the heating element power to trigger a relay to turn off the fans instead of using a temp controller.

[@JDS753]

Great video, yes the ice maker brought me in, but some of your other content has given me good entertainment as well. I'm coming to stick around for the updates and mowing videos, might even look at the house stuff on occasion

[@TKCL]

Thank you for watching

[@frank8534]

Men love to build and tinker…love it man. Thanks for sharing

[@SeattlePioneer]

I'm kind of surprised to find that I like the original version of your ice maker the best. Low cost and simplicity appeal to me. But it's great seeing the updated version, even if it just means I appreciate version one even more!

[@gcampbell83]

Great build. You put a lot of thought into the 2.0 build. I can see why you were so excited. Like you said, the convenience and time savings are the most valuable assets you get from the build. One more thing you gain over a commercial ice maker is the ice is more solid and lasts longer in an ice chest than production ice. Another way to increase your overall volume of ice for the weekend would be to get another freezer and load that a couple of times a week from your production freezer. I give up a shelf in my side by side for extra volume that I need for my weekend trips. I no longer purchase expensive lesser quality bagged ice.

[@TKCL]

I also have a table top machine that I can get over 30lbs a day out of. I can kick it on, bag the ice and really build inventory for the weekend.

[@Travellog2000]

So impressed with you and your wife. Love dropping in to see all you do. Been watching for several months, shortly before your fice maker 1 build. Keep it up and wish you all the best. Always look forward to whatever is next.....

[@TKCL]

Thank you very much

[@hunterjackson802]

I have alittle bit of info that may help, when making snow at a ski resort its the principle of cold air mixing with very fine water droplets that decide the crystallization of water. So if you could super cool the inside of the mold as quickly as possible after the heating element has released the ice that should increase the development of ice. I had a uline clear icemaker which is a commercial unit, and how it functioned was a freon cooled mold, chilled the water as it recirculated across it until the ice had built up, then it would heat up and release. I think ur best bet is using the walls of the freezer as the driving force of the freezing, its not the bottom of the freezer its the sides that are the coldest. So isolating one of the sides and channeling the air through would be the best chance.

[@JacquelineClayton777]

This is such an interesting video. I have been mesmerized watching this. I am amazed at how many rude and inappropriate remarks people make. Arm chair quarterbacks, know it all but can't do anything. You can also get some JB Weld plastic epoxy to repair the plastic parts. It comes in white color. It is an amazing product to repair plastic. Great videos! You speak clearly, you show what you are doing and you do not waste time. It is so interesting to see what you have made and how it's going. Best of luck to you and congratulations on this build. I am so inspired.

[@TKCL]

Thank you for watching and for the kind comments.

[@lancehess2457]

Agreed you do not need that much ice it’s great for what you need. Good job!

[@joebufford2972]

hey Adam it's Joe you can make your videos as long as you want and I love the complete data filled talk about how things work, I use PVC like that too. an experiment is never bad, you just learn results!

[@TKCL]

Thank you for watching

[@joebufford2972]

@@TKCL I got your six brother, oh that means you're back.

[@joebufford2972]

him everything you do is what I would do, the PVC is what I use when I have a bathroom baseboard trim issue where I cannot use wood MDF or anything else. you know how to do stuff, Mad Skills to you!

[@michaelferdon1697]

I followed Andrew's 2.0 build and it's no joke!! I'm getting 11.5lbs a day. Have a buddy looking for more output and was wondering if anyone has a bigger setup with larger freezer. Thanks to Andrew and his followers!! 👋

[@mgilbert754]

Awesome job bud! I'm a farm kid wannabe but I love your site- it's just great!

[@starkfm]

Use only one fan motor!!! attached to lid will increase production, excellent idea btw, air flow from bottom is a waste of space (storage) as you pointed out, as well as additional components and energy use, direct air flow over the water just like the manufactures do will help to maximize your production. turning fan off when the ice makers thermostat(s) activates the motor, rotating the shaft, while turning the cam, causing fingers to put pressure on the ice, rotating cam turns on mold heater via a micro switch allows ice to break free of mold and push the ice up and over mold, as cam rotates mold heater is shut off and a different micro switch activates the water valve, if micro switch has a normally open as well as normally closed spade) you can electrically tie the fan thru mold heater micro switch to a hvac fan relay to cut fan off when either mold heater is on. A single fan switch for door works and can be tied into the fan circuit but cooling the mold while the heater is on defeats the purpose of the heater, wastes production time, energy and adds heat back into the space. PS the teal colored shirt is my fav, however most people mistake it for representation of the govt agency and sorry to say you can unfortunately be mistreated, located on east coast between st aug and daytona

[@starkfm]

MY MISTAKE & some clarification...... if your ice maker mold heater micro switch has a normally CLOSED spade then a fan relay is not necessary and can be wired thru the door switch directly to the fan. A fan relay is only needed if the normally closed spade is not on your mold heater micro switch. Fan can be driven via the mold heater normally OPEN spade to a fan relay then thru the door switch

[@extraholiday44]

Awesome job thank you for all the tech info and you really make your video easy to follow and understand

[@TKCL]

Thank you for watching

[@PowerGearPerformance]

Creative. Nice work. Thanks for sharing

[@TKCL]

Thank you for watching

[@RustyNail5856]

I enjoyed the video very much. a lot of info.

[@TKCL]

Thank you for watching

[@LAWNPRO]

You are great my friend I did find your channel because of the ice.maker I like your super detial of stats and build no complaints here anyone that complains or shoots out criticism they probably have never created anything great work and will continue to watch keep up the great content

[@TKCL]

Thank you for watching

[@garyclemons561]

Thank you for sharing your knowledge! Your very smart person

[@TKCL]

Thank you for watching

[@matthewpoteet2339]

This is awesome. Thank you for building 2.0.

[@TKCL]

Thank you for watching

[@donaldslate4195]

Use foil Tape to seal the foam insulation . Top and bottom. That will make it sanitary. Block ice will be clear or cloudy? Put that name plate on the ice chest.lol To check the seal if is leaking. Take a piece of paper, place in the seal and pull to see in you have resistance.

[@TKCL]

All joints were sealed with caulk and butyl. The sticker is already on it, see the community post I put out a little while ago.

[@donaldslate4195]

Not seeing the community post.

[@TKCL]

Sadly there is no share button for posts, but it was posted 13 hours ago.

[@petrusfourie6991]

Great job. Respect your attitude

[@TKCL]

Thank you for watching

[@steamboater05]

I'm glad to see your 2.0! It would be pretty neat if you did a thermal map of the freezer with the fans running and without them running. Especially around the collar.

[@hrlee2381]

Congratulations on your ice machine build. It's great to have ice when needed without a trip to the convivence store.

[@TKCL]

Thank you

[@yverocks64]

Congrats on your Channel's growth! 🥳 Cheers on a successful DIY Icemaker 2.0! 🎉🎊 While, I am not likely to ever build my own version, but I am utterly fascinated by your detailed explanations and process. So, I'm grabbing some popcorn, hunkering down, and waiting for the next one. 👍🏽

[@TKCL]

Thank you very much

[@acd2505]

The block ice is a great idea! It makes a huge difference for us on longer camping trips. Before using the blocks we would easily run through 40-50lbs of ice now 20lbs of blocks holds us for a week in the southwest desert.

[@victortanuz6334]

Keep on keeping on. Can't wait for the next test results

[@erniegroocock4354]

You’re an evil genius lol borderline of session with icemaking I commend you my friend

[@HollowedHeaven]

Thank you for this build bro I'll be waiting for the next one unless it's already out

[@TKCL]

I have a playlist with a lot of videos. Check it out!

[@johnhouli3450]

Great job.

[@TKCL]

Thank you

[@frankrubeshaw4673]

Great video. No complaint on the length of the video. Testing testing testing Wahu. 👍

[@robbiekerby2777]

Wow, great video. Long, but worth it. This is clean, this is efficient and works great. I call it a 100% success!!!!!

[@TKCL]

Thank you very much

[@SaadY92]

Nice view outside.

[@TKCL]

Thank you

[@miguelorengo8506]

Awsome video, thank you so much!

[@TKCL]

Glad you enjoyed it

[@kingwood4357]

Can't wait to see Version 3.0

[@TKCL]

Lol I'm already thinking about it 🤔💭

[@Londa7799]

Very Smart Man!!! Thanks For Sharing

[@TKCL]

Thank you for watching

[@malcolmmacdonald3992]

Andrew what a great video! As you mentioned towards the end I must admit that you’re quite right I did come across your channel and subscribe to it because I found the ice maker videos fascinating. Having said that please rest assured that I will remain a faithful subscriber to your channel because in the process I got to “meet“ you, Tiffany and even Bullet and watch you build your house, enjoy a couple of your life streams and just get a glimpse to your unique way of life that’s pretty different from my reality on the other side of the planet (well, a little lower anyway) So I’ll stick around because I enjoy your company I’ll enjoy the testing videos but I’ve already enjoyed watching you work towards finishing your house and I’m looking forward to other projects you might come up with! You guys take care now and see you on the next one.

[@TKCL]

Thank you very much for the kind words and continuing to support us.

[@jamesfontaine5921]

Very nice videos, been following from the start! Keep going!

[@masterduckey]

Hi my name is Mark I'm going to try my own build with your suggestions thank you so much for your video

[@TKCL]

Good luck! Mine is still used daily after all this time.

[@johnsoper6931]

I did first follow you for the icemaker, I actually did a search for DIY icemaker and have loved following it. However I'm not done here I still have to see the rest of the house build and still have half the video's you've done just to catch up! Love the idea of a swamp cooler. My brother in law once rigged a cooler with ice in the back of his truck with a 12volt pump and coil with dual evaporator fans in the cab on a switch for very hot rides to work on a ferry where you can't run your engine. He was always the only one inside a vehicle with the windows up !

[@TKCL]

I'm definitely building a more modern swamp cooler.

[@bretburt7317]

Sorry, I asked the previous question before I got to the end! But I watched every minute.

[@TKCL]

Thank you for watching, I'm testing it right now and it appears I can reduce cost to build significantly.

[@blainegregg3951]

Thank you for doing this. I will be building myself an ice maker like this.

[@TKCL]

Thank you for watching

[@alejandrolongoria9945]

Great build! The only suggestion I would make is to add a five stage filtration system and the ice would be crystal clear and would last longer.

[@ramvan2284]

wow, is that your back yard? what a beautiful view. ohh and cool ice maker too.

[@TKCL]

Yes it is! We love our property

[@lloydoliphant4965]

Very cool, no pun intended

[@aja12]

Thanks ☺️👍

[@jasonsutton4719]

Great video Andrew. This build has turned out great. Ice maker 2.0 has turned out great. Whatever you do next I'll watch the improvements to it.

[@TKCL]

Thank you

[@jasonsutton4719]

@@TKCL You're welcome!!

[@appalachianamerican7171]

Very COOL man, thanks for the great ideas.

[@TKCL]

Glad you enjoyed it

[@deltoncbaker]

The computer fans you choose for your machine have typical ball bearings that generate heat and noise through friction. There are newer computer fans that magnetic levitation instead of bearings. They are virtually silent and produce significantly less heat. Of course they cost three times as much. Great episode, I was looking at a traditional industrial style ice maker, the ice in those machines is always just on the verge of melting and the ice doesn’t last like the refrigerator ice does. I am buying ice right now and I live in town. By the time I get it home, 10 minutes or so drive, the ice is already in full on melt mode. I drop it in a deep freezer like yours. The next day it is frozen solid again, but I can put it in a glass I have to beat it to death with a claw hammer. The moral of the story there are even more convenient reasons for making it at home.

[@TKCL]

Very valid points

[@dougdavis4439]

Worth the wait and look forward to seeing how your ideas work out in the next video. Thanks Andrew. You keep me watching with your content and shared information! Take care!

[@TKCL]

Thank you for watching and supporting us

[@leifhietala8074]

You could probably pick up a few more percentage points of efficiency by building a hat of insulation to drop on top of the lid, with a close-fitting skirt to come down and cover the new collar. All of that said, this is just brilliant and I've enjoyed every minute of the build and testing. You're watchable and smart, two great features to bring to any presentation and it's been a great ride so far.

[@TKCL]

Thank you for watching

[@jeffseyfert3640]

Great build alot nicer looking ice maker keep up the good builds

[@kennynoll8414]

Great job, that is basically what I did based off your 1.0 however you did a much nicer job especially with the Insulation. I am interested To see your production when you move the fans to the top, my personal experience I get more ice with the fans on the bottom but again I did not insulate as good so I think I am pulling hot air down on the icemakers. You’ve definitely get the wheels turning in my head LOL

[@TKCL]

I'll be testing that next week

[@spareamintz8708]

Ok! I'm here to stay! Ice machine and Barndo too! 😄

[@TKCL]

Thank you for the support

[@andrewmartin3962]

Andrew really did enjoy the build... can't wait to see what else u have in mind on testing to see how much ice u can get... I will be a loyal subscriber as long as ur channel is up and going.. keep the great job up and cheers to u and ur wife and bullet ..

[@TKCL]

Thank you very much

[@jasonwarmuth6452]

Great idea with the fan switch! ill be adding one to mine