#246

[@kyledowns4877]

I just bought my 462 the other day and I love it. After watching this video I think I might upgrade more than just a bigger bar. Thanks for the ideas.

[@TKCL]

Sweet saws!

[@stevegriffith8680]

Definitely do the foam filter. It made a huge difference. I'm waiting on the new cover as well seeing the stock one is small and clogs up pretty quick when I use my Alaskan mill. Also should help drop the chips down and not shoot them 15feet behind me. Love my 462 and all of WCS upgraded. Going do the new suspension kit as well as I run a 32 bar and tends to bottom out but it pulls a Oregon skip tooth just fine on the 32" I run a full house on the 25" and she eats. Make sure your running good gas also that makes a huge difference, I do 40:1 with VP 2 stroke synthetic mix with 95 octane ethanol free gas.

[@richardbrowne1679]

Great upgrades for the 462. I love the sound. 😀👍

[@TKCL]

I love it too!

[@peterdeforge9326]

LOL when you fired it up with the bark box on it I made the EXACT same face you did! Sounds SO much better with that box on it! I'm getting a 462R CM soon.. I'm going to pre-order those dogs and the box and I'm putting them on immediately.

[@TKCL]

Enjoy that new saw

[@walterwerfel6209]

The dogs look like a great upgrade and simple enough for even me to do. Glad to see you looking for a good use for the noodles. I try to do most of my cutting in the same general location. I cut everything into log lengths in the woods, stack the logs for storage on cross ties and pull them out and cut as needed and when it is too wet to get in the woods. I mostly add the saw dust I generate to the compost pile. I have a huge compost pile--2 bays side by side each 12 feet by 32 feet. I also keep a bucket in the garage and use it as oil dry. Congratulations on the success of your channel. I look everyday for a new video and I really enjoy your entertaining and informative content.

[@TKCL]

Thank you for the kind feedback! Boy I wish I had compost piles as big as yours. Once we get animals, I plan to make larger compost piles.

[@walterwerfel6209]

@@TKCL Mine are mostly leaves and grass clippings. I live a wooded area and I get the leaves off my yard and 2 of my neighbors. I move the piles around a little with my the bucket on my BX. In theory I move them from one bin to the other but both bins are full now. I garden exclusively in raised beds. I have 9 x 4X12 3 2x6 high and 5 x 4x16 3 2x6 high. I usually end up with more compost than I need. It has become just anothe excuse to play with my toy tractor

[@TKCL]

I started growing in raised beds exclusively last year and I'm blown away by how much you can produce in such a small space.

[@mattdunkleberger7009]

Add the foam filter it makes a big difference.open up the top plastic around the air box ,in other words make a vent for it to breath .great channel thanks for the videos.

[@samclements2834]

Beastmode! You’re doing a great job with your channel and content, I never get bored! You cover all the things that are important to me. I get a ton of ideas from watching. Keep up the great work!!

[@TKCL]

Appreciate the feedback and supporting the channel! I'll do my best to always keep the content fresh!

[@ckfab475]

Almost reminds me of my hot rod days and headers.

[@TKCL]

Lol, just reminds me of high school trucks and putting flow masters on them.

[@WoodsTreeFarm]

excellent "discovery" with rocking the saw. Glad I stuck around for that. Well done!

[@TKCL]

I was shocked to see the difference, most people comment its faster to let the saw work.

[@WoodsTreeFarm]

@@TKCL data don't lie

[@itiswhatitis3839]

Upgrade to the foam WCS filter will help your ms462 breath and perform better

[@garyallison4246]

Bought a 462 late in '22. Just put the big stihl dogs on it. Your right, had to size the dog on the cover to fit! The thing i noticed the most about the original dog is it made my saw pull slightly to the right. I assume this was because it was a single dog. The new aggressive dogs that stihl says is a "option", fixed that problem. Good video, enjoyed it!

[@kerrydyas1386]

When you get chickens can use the sawdust for them. The sound difference 👌 Lovely piece of equipment

[@ciphercode2298]

I've been running a ms441c for 10 years and it's been a great saw. It's a little heavier and slower than a 462,but gets the job done. I've opened up the muffler some and run a 28" bar on it. It does great cuttin our big red oak around here in West Virginia. I've gotta tune it up soon and get me a new 2 in 1 file and hopefully I'll get to order West coast saws 3 point dawgs. I'm still splitting 4-5 cord of wood a year by hand and would really love a log splitter in a year or two. Love your videos, keep it up

[@TKCL]

Stihl makes a great product for sure.

[@hartleyhomesteadmichigan6041]

Yes rocking the saw is faster for sure

[@TKCL]

I was shocked at the difference!

[@Outtahide540]

Rocking with the new dogs. Super fast. Good work and stay safe

[@TKCL]

They bite!

[@dmalloy96]

My logging buddy put a bark box on his 661c it seems like it made it cut faster but you don’t want to stand very close with earplugs. The noodles work good for animal bedding when it’s dry

[@TKCL]

That's been a popular recommendation for the noodles. I saved some for fire starting material. The bark box is louder for sure, luckily I always work alone.

[@bowhunting1013]

I noticed when the dawgs hooked , it cut like butter , saw sounds mean too , keep the videos coming brother, god bless

[@TKCL]

Thanks, God bless you too! It's a really big difference on how much better the saw cuts with just the dawgs actually biting in and letting the saw work.

[@frankwallace5174]

i was just thinking about getting these three things and now you have convinced me. thanks and great video 👍👍 and congrats on the 1 million views and its great to watch ya doing all this stuff

[@TKCL]

Thank you for the support and sticking with the channel!

[@roblong6518]

Upgrades look good, and helps performance too! 👍

[@TKCL]

I love the upgrades

[@outdoorswiththisguy1950]

wow that this is way faster now. and looks like a stud of a saw with those new dogs. love the sound

[@TKCL]

The dogs are a must have accessory in my mind, the exhaust was not necessary, but I love it!

[@farmerkevin]

Thanks to your video my Bark Box is ordered.

[@outsidewithjohnhayes4674]

Ok Andrew that was great loved the upgrade to your saw I have a 440

[@TKCL]

Thanks, I love the way its set up now.

[@backcreekcabin4994]

Great video as always and some great upgrades. I need to do those upgrades to my saw. Thanks Andrew.

[@TKCL]

Made a big difference to me, especially the new dogs.

[@roastntoast7550]

Stihl is a German Company. Our Trees don't have that thick barks like you West Coast guys and gals have! But they also look much better, I would also be happy if the dogs were bigger!

[@chrisy939]

That thing makes some SERIOUS wood “chips”, and a lot of them! They would work perfect in our horse stalls, good looking stuff.!

[@TKCL]

Yep or for chickens as a lot of other people have suggested. I saved some for fire starting material.

[@woofy548]

We use them for our chicken coops too. Awesome bedding for nesting boxes.

[@deliverybryan1138]

I just upgraded to WCS clutch cover it has the captive bar nuts ! I got the 462 version as you , mine has the wrap handle and it also the WSC bark box I run a 28 up to 36 inch bar ! I'm also planning on getting the red beard or WCS foam air filter someday ! I have the Egan 3 point falling dogs !

[@TKCL]

Nice setup!

[@dougdavis4439]

Love the new dogs and that bark box really beefed up the sound. Doesn't wine and kind of roars now. Love it!

[@TKCL]

Iove both upgrades myself, those dogs are a definite must have upgrade.

[@russellshirk1148]

Man that saw sounds and looks so much better with the new mods.

[@TKCL]

I agree, I absolutely love it

[@Peter-ro7eb]

Awesome video and I’m going to find those add ons for my saw keep up the great videos.

[@TKCL]

Thanks, West Coast Saw is the company I ordered them from.

[@matthewbolton4289]

westcoast saw makes some of THE best products

[@brianmanke1061]

First time to your channel. I enjoyed the simple mods to increase the performance of the 462. Nice work on the rounds, now time to get your mail out!

[@TKCL]

Thank you for watching

[@JTFraser87]

Nice review, just ordered a bark box and filter for my 462 from West Coast Saw. Itching to try it out! Cheers!

[@TKCL]

It sounds mean! I still really enjoy the upgrades.

[@aarons3203]

Awesome saw Andrew! Now you'll need a full wrap for that beauty. I like mine, keeps it from tipping over in the bed of my pickup.

[@TKCL]

Very nice! I'm actually surprised at how well the new dawgs are holding up and supporting the saw. Can definitely tip of though

[@neelieknits382]

I have enjoyed your videos. Hoping your channel continues to grow.

[@TKCL]

Thank you very much for the support

[@andytripp6847]

Great video man. Just like everyone else I like the upgrades for what it’s worth. Looks like you liked them too. Cutting and splitting is hard enough work so upgrades like that can make the work just a little big easier.

[@TKCL]

That saw makes the work far easier than my smaller saw does. Underpowered equipment tends to work the operator harder.

[@andytripp6847]

I agree 100%

[@markdavert3063]

I really like those upgrades you did , I've been enjoying your videos keep them coming .

[@TKCL]

Thanks! Plenty more coming

[@joebufford2972]

Mr Andrew you got a new toy and you just can't stop playing with it! I couldn't stop either. like you said Carnage everywhere

[@TKCL]

Love that saw

[@davewyatt1468]

Great video man ! Enjoyed the watch

[@TKCL]

Thanks for watching

[@5150cash]

We both had the same facial expression when you started to saw with the new muffler 👍😁.

[@TKCL]

I LOVE it!

[@In2investing]

That snap ring was a PITA huh? I have same saw with the foam filter and love it. Nice vid

[@ftlaud911]

Nice upgrades!!! The muffler sounded great on startup. The 462 is the top of the goldilocks size and 400c at the bottom IMHO. Rather have too much than not enough power when you need it.

[@TKCL]

100 percent agree! It's a beast of a saw at a manageable weight.

[@johnhoogenraad7898]

I grabbed a 462 CM VW this summer and it came with monster felling spikes on it, I'm actually thinking about getting smaller ones

[@gatorb4161]

Nice! Looks and sounds like a beast now.

[@TKCL]

It is, I love this saw!

[@JimmyHensley36]

Bad ass it was . Amazing.. keep that back healthy .. great video 👍🏼👍🏼👍🏼

[@TKCL]

Thanks, I'm loving how the saw is set up now! Perfect!

[@JimmyHensley36]

I find myself watching your older videos man and watching one now of you clearing brush beside wood rack so you can extend the wood rack . Lol

[@TKCL]

Awesome, I sometimes watch my older videos to see the progress. KZbin to me is like picture albums everyone use to keep around their homes. It's a great way to look back.

[@JimmyHensley36]

@@TKCL Absolutely..

[@hendersonhow2andreview17]

The chainsaw chips or shavings whatever you want to call it makes the best firestarter I've ever seen. Take a 5 gallon bucket and fill it half way with shavings. Then pour a couple gallons on kerosene in with it and let the chips soak it up stirring occasionally. It will turn in to a paste. When u wanna make a fire smear some on 1 of your logs and light it. Will blow your mind and making an awesome fire starter from scrap. I use to bucket it up in one gallon pales and sale it. Even took some of the little fruit cup holders u remember from school and filled them up and sold them as fire starters. Just set it in the fire and light it. I sold them for a dollar each years ago. You could sale them with your firewood. Just a thought.....awesome mods to the chainsaw!!! Sounds freakin awesome .....

[@TKCL]

Awesome! The noodles make great fire starter too. I'll try your idea.

[@fredmcvey3489]

did you every switch to the oil able foam filter if so dose it give the saw more power

[@TKCL]

Nope still running the factory filters.

[@kalinschannel2185]

Awesome video, my saw is on order!

[@TKCL]

Have fun!

[@Swampster9]

Might want to try Egan straight shot exhaust!

[@Dawg-2021]

Love the upgrades Big Dawg!

[@TKCL]

Thanks, makes the saw perfect!

[@LeuCustomKnives]

When you put on those larger dogs on it reminded me of what Batman’s MS462C would look like!

[@TKCL]

Lol!

[@genescottjr8413]

Ok did the same exact upgrades to my 462cm! Wow I've got a 20 on it but my goodness! The dogs do seriously shorten the cutting length! Be going to a 24 I have. But what a difference

[@TKCL]

Its just a beast of a saw with those upgrades. It's absolutely perfect and I can't see needing anymore power for the cutting I do.

[@Zeppy007]

5 K congrats brother! 10 K will come up fast, hide and watch :-)

[@TKCL]

Thanks, I certainly hope it does

[@JoeDavis82]

Oh yeah, those dogs look badass

[@TKCL]

Yes they completely change the look of the saw!

[@JDubbsadventure]

The noodles are great for easter baskets

[@codykeller5629]

Thing sounds sweet nice upgrades

[@TKCL]

Thanks, Iove it!

[@woofy548]

Did the same thing to my 500 and my 362. The factory dawgs are a complete joke. Put the same bark box on my 500i .. haha sounds like a drag saw.

[@jasonorlasky5105]

I got the eagan straight shot muffler love it

[@MJADoingStuff]

That is a mean upgrade! Really sounds good. looks like its kicking out some top ramen. (cup o noodles) great video!

[@TKCL]

Ramen lol, that's a good way of putting it. I might have to borrow that line.

[@haroldanderson2781]

The new muffler sounds quieter but deeper on video. That is a sweet saw!

[@TKCL]

It's actually louder, but does have a deeper tone with a pop. Almost sounds like a ported hot saw. Well in my mind anyway. I hear less bogging with it, so it sure feels like it's pulling harder. Take care

[@harrisonmartin1790]

@The Kelly’s Country Life -around here where I’m from in Canada we save the saw dust and noodles for livestock bedding . Works fantastic . Many ppl bag it up and sell it for a few bucks

[@TKCL]

That's definitely a good idea. I saved some and it's already dry enough that I started my smoker and fire pit with it yesterday.

[@jonnycruse725]

Nice! I'm gonna go check out that website. Im going to look at mods for my saws. Great work bud.

[@TKCL]

Thanks, I'm loving the add ons.

[@larryreno8293]

I don’t care if it faster or not! It sure sounds like a beast.

[@TKCL]

That's right! I was dead set I was keeping it since it sounded so good, faster or not.

[@danarmstrong954]

Sure like the new dogs, they really bite!

[@TKCL]

Yes they do, finally! Those factory dogs are pitiful.

[@Zach_R]

I don't remember if you mentioned it but every time you add a new performance upgrade you need to recalibrate the saw.

[@charleswilliams8296]

That saw is looking tougher with those new dogs!

[@TKCL]

It definitely looks better and bites better

[@erikdbriggs1]

You turned her into a light saber! Also those "noodles" make great bedding for rabbits or other critters.

[@TKCL]

Bedding has been a popular response, can't wait until we get animals.

[@OGAOutdoors]

Saw sounded really good with the new muffler installed take care brother.

[@TKCL]

I love it! Take care

[@bentwedgestanleybrand5818]

I heard the 462 has a heated handle model? Self personality heated handles 24 in light bar. I think that would be a good combo

[@ryanzynda5114]

excellent upgrades.

[@TKCL]

Glad you like them!

[@gsmiley7700]

That's a banger now!

[@TKCL]

I love it!

[@maraudermitchelli]

Your chips are excellent. Andrew i don't like making things louder thought...just disturbs more people. But if you enjoy that's great.

[@TKCL]

I usually don't myself, but no neighbors right near me. Just disturbing the squirrels lol.

[@maraudermitchelli]

@@TKCL no explanation needed i watched your entire video. I off road ride and use to fly remote control planes and we lost rails and flying fields due to modified mufflers. Stay warm...23' in Buffalo.

[@JeepLJ]

Hey where did you get that peg board? Love the organized shop.

[@TKCL]

From Amazon, if you will check the video description you'll see a link to our Amazon store where I list everything you see on our videos.

[@fredmcvey3489]

i just bought a ms 462 they did not have the cm at my dealer so i got the one with regler carb on it what do u think of that one as fare as weight i did the same mods as you love yhe vids brother

[@TKCL]

I'm not sure of the difference between the two. But if it's the same cc, you'll love that saw. Excellent power to weight ratio.

[@Living-The-Dream]

Great improvements 🪵👍😎👏

[@TKCL]

Thanks!

[@Living-The-Dream]

@@TKCL plan on doing the, almost exact same thing, once I find out I can add the Bark Box and still have the full warranty 👍🪵🔥🍻

[@bobjames5474]

Do you like the 462 electronic ignition ? I've been Leary on buying. I'm so used to adjusting. Can you fine tune?

[@TKCL]

That technology has been around for quite a while and seems extremely reliable. I know many people with M tronic saws, zero issues. You cannot tune it, you don't need to. It automatically adjusts to atmospheric conditions, air filter cleanliness ect.

[@bobjames5474]

@@TKCL Thanks, I bought one today. MS 462 C, 25 inch bar, I been having fun blowing through wood all afternoon. I ordered the same dogs, chain catch and muffler from West Coast. I love knowing I don't have to mess with adjusting air fuel mix....I absolutely Love it. Thanks for the video ! This is one badd azz saw, you sold me on it !

[@TKCL]

It's got an insane amount of power for the weight class it's in. I can't ever see needing a bigger saw. Mine will pull a 32 inch bar too.

[@PurpleCollarLife]

Great upgrades!

[@TKCL]

Thanks, been running them for over a year with zero issues.

[@Justinbpierson]

Greetings! Need to take the old catch off. Bolts go from the other way. Nuts should be on the outside.

[@TKCL]

Thanks for tip, I'll do that!

[@5150cash]

Just ordered my mufflers for my sm170- ms211- and ms271. Thanks for making me spend my stimulus money 🤑💰 lol 🤘

[@TKCL]

Lol, enjoy them!

[@rickmoss7040]

Where did you find one for your 271? I talked to west coast saws and they don’t make one for the 271. They sent me a link for a small piece that goes inside the muffler. A universal adaptor.

[@wiceprezes95faza]

I have a 462, but with a regular carburetor. Will adjustment be necessary? I Can work normally ? :)

[@TKCL]

Some adjustment will most likely be needed to compensate for the increase air flow.

[@wiceprezes95faza]

@@TKCL thanks :)

[@patricktillmanns3949]

That saw looked nice before, now it's just wicked .

[@TKCL]

It's setup perfectly now

[@rottiejakeluke]

What size bar do you run and what chain? Thank you.

[@TKCL]

Stihl full chisel 3/8 on a 25 inch bar.

[@rottiejakeluke]

@@TKCL thank you.

[@rottiejakeluke]

@@TKCL thank you.

[@lennywallace540]

One of the best chainsaw videos I've seen and I've seen a LOT. straight to the point and your reasoning for the upgrades totally make sense, love how you explained how the saw is getting beat up with the Lego factory spike (singular). I also agree they should come with beefy dual dogs and a roller catcher. I just bought a 462 a few days ago, I always opt for non- mtronic cause I like to do the tuning, and if I have a problem I don't have to bring it to the dealer to get plugged in like a car. I did what you did before I stumbled on your video. I got the West Coast Saw double dogs/spikes but the 3 point ones, no paint, and they just caught my eye more, bark box, and roller catcher. Saw is still in box, no gas in er till I get the upgrades. WCS claims the bark box also keeps saw running cooler too. I also bought a new ms261 a few years ago, the newer slimmer version with slightly more hp, diff cylinder design if remember right. The clutch cover on the newer 261's come with pre drilled recessed holes to run dual dogs/spikes which I upgraded to and it does handle better. It's a screamer and I can cut through 20" ash green or dry like butter. I like the 261 so much I bought a second one a week ago haha. Those as well are not mtronic. I ordered West Coast Saw "universal" muffler mods for them too. People will probably laugh at why I would do that to a 50cc saw. But I'm telling ya, it's a mean little saw, especially if tuned right and keep chain razor sharp. One other thing I did on all these saws was upgrade the "green" laminated bars to "yellow" solid steel bars, more heavy duty and have a wider nose which is supposedly better for bore cutting. And of course I run RS full chisel "yellow" non-safety chain. Cuts much much better than the "green" chain I first had. Just gotta filer er a little more often but to me it's worth it. Oh, also wanted to say I was very impressed that you had on all the appropriate safety gear on, ears, chaps, safety glasses, gloves, and looks like steel toe boots. 0:01 I've seen so many people cutting in shorts and shoes, even SANDALS! Plus no eye,ear, hand protection, and some not even wearing a hard hat when felling 🤦🏼‍♂️. Great video!👍🏻👍🏻

[@TKCL]

Thanks for the kind words! I absolutely love my 462, but that 261 is the perfect firewood saw in my opinion. Very light, nimble and surprisingly powerful.

[@joshstopani5174]

I have a ms 500i with a bark box my nabers love it haha

[@TKCL]

Lol if I was your neighbor I'd enjoy it 😁

[@ronaldhess8034]

If you get chickens in the future the saw chips/dust and noodles would be great as bedding. The mix of chicken manure and wood chips makes a great compost.

[@TKCL]

That's been a popular suggestion today, something I'll definitely remember. Thanks

[@woofy548]

I had the foam filter for awhile on my 500.. i ended up going back to the stock filter because the foam filter is a pain.

[@TKCL]

I like the factory filter.

[@MysticalDragon73]

why is it a pain?

[@philgriswold2133]

The saw upgrades are great and the muffler and the dogs are making a difference right away. By the way, thank you, thank you, thank for not doing a 15 minute dissertation on the practice of flipping over your bar. That has to be, without a doubt, the most commonly covered chainsaw subject on KZbin. What I don't understand is if you should flip your bar every time you sharpen, every 50 hours, or whatever it is, why does every KZbinr have their bar upside down? It seems like half of them would have it straight. I honestly think it's a little bit of showmanship. Also, I do flip my bar over occasionally, I just don't tell anyone. Great video, now I'm going to the WCS website.

[@TKCL]

Lol, I do flip my bar ever 2-3 sharpenings, but I definitely don't talk about it unless asked. I have had a lot of people comment as to why my bar is on upside down. Haha

[@heidibowman8000]

Nice DAWGS!

[@Bushcraftprepper56]

Love your videos.

[@TKCL]

Appreciate you watching thank you!

[@jeffhill3591]

It sounds great

[@TKCL]

I love it

[@lkjyuiop1987]

I know little of what you are doing but I’m watching this video ya got lot of land to plant trees

[@TKCL]

I've already planted thousands of trees about 7 years ago. The rest is pasture for future animals.

[@bigDH123]

Very impressive Andrew. I'll stick to my 51 husky, lol

[@TKCL]

Lol, to each his own!

[@andystampfli9127]

I figured you were going to put green dogs on when you said you liked the color. Now you have to paint your tractor.

[@TKCL]

Lol, don't think that would look all that great.

[@andystampfli9127]

@@TKCL never know til you try...

[@jimmykinnett2274]

Great job.

[@TKCL]

Thanks

[@thim8009]

Take a black Sharpy marker and cover yellow paint on Dawgs every now and then.

[@collincolston8443]

Great sound with the new muffler.

[@TKCL]

I love it!

[@fredmcvey3489]

did adding those upgrades effect the factory warrant

[@TKCL]

Not that I am aware of, I've not needed to warranty anything with any of my saws. I'd definitely put it back to factory before carrying back to the store.

[@hfuqua1]

That thing eats. Probably upgrading to 462 in the future

[@TKCL]

It's an amazing saw, honestly it's got more power than I was ever expecting. That's a good thing

[@rickmoss7040]

Just curious if you are flipping your bar when you sharpen your blades or every couple of tanks of gas….or if you are getting enough bar oil…I noticed the bottom of your bar looking a little ‘burnt’….I am pretty mew to the whole chainsaw gig, so it could just be wood build up…just found your channel….Subbed…great vid, thanks for the effort of putting it together for us.

[@TKCL]

I do flip my bars, that was actually brown bark build up. I cut a certain type of tree here that has extremely thick bark around it and it gunked the bar up. I showed in a video at one point how to knock a small pin in and get more oiling out of the factory adjustment.

[@colin8532]

Oh man, I want one!

[@TKCL]

I dreamed about one for over two years, just waiting to justify one. I don't regret the purchase at all

[@jimmccullough1051]

nice upgrades.

[@TKCL]

Thanks

[@chriskennedy9494]

Nice upgrade.

[@TKCL]

Thanks, I'm loving it