STIHL 462 C-M chainsaw cutting Firewood

[@davidkirkman2223]

Chris it is nice to see Stihl and huskys working together in a non compreance for a good job done.

[@InTheWoodyard]

They both make good stuff!

[@mikehughes2026]

Morning Fellas, great day of cutting at your new Honey Hole, nice size, beautiful wood. Take care, see you tomorrow

[@InTheWoodyard]

Morning thanks Mike!

[@rickdesrochers7787]

Picking up my new MS462 with a 24 inch bar this week. Can't wait to get it working

[@InTheWoodyard]

Very nice saw! Get cuttin'!

[@toddsoutsideagain]

Nice video fellas! Good change of pace to see ya out cuttin again Chris! That place it an absolute gold mine for firewood!! Felling trees right in the road! You can’t beat that.👍🏻👍🏻GNI

[@InTheWoodyard]

Yup!

[@InTheWoodyard]

Yup!

[@MuhaloTube]

What a nice spot to cut some timber. Drive right up and drive right out. 462 is a great saw for all of that.

[@InTheWoodyard]

You got that right!

[@outdoorswithlarryrobin]

Teamwork makes for a lot of firewood! Safe cutting guys! This old guy loves his 362c with a 25” bar😂🪵👍🏼🇺🇸

[@InTheWoodyard]

Yup, help is good!

[@larryvankirk7423]

Nice job guys. You put a lot of wood on the ground today. Tony has been holding out with his cutting/felling skill. Running a new Stihl at half throttle will teach it bad habits/let her rip. GNI

[@InTheWoodyard]

Yup, Tony is a good saw man!

[@halfdollar86]

I just got my 462 yesterday. I can’t wait to try it out. It’s a nice companion for my 550MK2. Out of the 50 cc I leaned towards Husky. On the 70cc I leaned towards Stihl. Both companies make great saws in my opinion. I think the Echo 60cc saws may be some of the best bang for the Buck though. Would like to run one sometime.

[@InTheWoodyard]

Yup, they all make good stuff!

[@jgl2520]

I do enjoy your videos,, watching from Enniskillen, Northern Ireland..

[@InTheWoodyard]

Thanks so much glad to have friend from across the pond!

[@sap3055]

I'm a husqvarna and jonsered man but in my job as a firefighter we use the sthil 462 firefighter edition and I absolutely fell in love with that saw so I'm now considering buying one to cut my firewood Greetings from Norway to you guys

[@InTheWoodyard]

Yes! That is a really nice saw!

[@johnhaug5527]

Chris, I like that you are cutting the tops, 3", 4" wood along with the big logs. Also, the top handle saw with the magnet measuring device looked like it worked like a charm. Keep cutting, splitting and stacking.

[@InTheWoodyard]

Thanks John!

[@LGAH29]

Just brought one - your videos helped me decide, thanks very much

[@InTheWoodyard]

Very cool, you will like it a lot!

[@GPOutdoors]

I don't know guys...now I'm not say'in I am biased but I am think'in that 462 at half throttle was smok'in that big Huskie out Chris! LOL! JK! Thanks gents! Thanks for the tip Tony - I didn't know you were supposed to run at half throttle for a few tanks first. Some big wood today!

[@TonysCoolTools]

GP there are many different opinions on saw break-in. Chris's Husky dealer told him just go out and run his new 592 saw. Both my IL and Wisc Stihl dealers told me to take it easy for the first few tanks of fuel. Run the saw at half throttle or vary the rpm's but limit full throttle for long periods of time. As I mentioned before, after running about 10 or so tanks the saw has improved performance. Cheers, hope you get your saw soon, I know firsthand how hard it is to be patient waiting for it.

[@rmac41981]

I idled and babied my ms261 first tank the second tank opened it up and she puked and sputtered and stalled out had to go back dealer to reset mtronics on the computer. It wouldn’t even start just flooded. Now no issues running it like it is supposed too. Might have been my fault it burped and released choke now I pull until she runs on start.

[@InTheWoodyard]

Haaaa! You will see soon!

[@InTheWoodyard]

The saws are made to cut so that is what I do with it!

[@timfunk5084]

@@InTheWoodyard as long as you have load on saw no problem. What they don’t want is people standing with trigger smashed without load.

[@craigwilson9560]

Chris, great work with Tony dropping, limbing, and blocking those trees up today. Like how Tony used the top handle saw to mark his rounds. Has to be great to go to the woods and work with Tony! Great video!

[@InTheWoodyard]

Yup, he is a good guy!

[@craigwilson9560]

@@InTheWoodyard most definitely! Everyone wishes they had a tony or you in their life. 😀 both a wealth of knowledge, fun, and great work ethics

[@obiorah1]

I enjoyed this video you and Tony working together and cutting oak trees at 150 acre property, that’s more wood for you and Tony, bring your brother Ken to join you and Tony,

[@InTheWoodyard]

Thanks, we might do that!

[@timothyboice7064]

462 beast Beautiful place to cut some oak! My son and I got some wood to finish cutting here in Va cold and windy but warm compared to Wisconsin!!

[@InTheWoodyard]

It is about 5 degrees this morning.

[@richardnixon9204]

You guys make the best of buddy's with the combined great knowledge of saws, thank you guys super vid. !!! Fm. Lathrup.Vill. Michigan 👍

[@InTheWoodyard]

Thanks Richard!

[@LeuCustomKnives]

Man like firewood Heaven! 5’F there and 88’f here! I think I’ll take the 5’f. Having fun and making money is the best!

[@InTheWoodyard]

Yup, it is a good place!

[@ocdwhisky181]

Absolutely loving these on location videos Chris.. As a Uk watcher it is awesome to see you going into these forests and seeing all the action. Plus learning so much about the saws but as a Stihl guy ( sorry) who's about to jump from running a baby 180 and a 251 up to either a 362 or 391 (still trying ti decide which ) watching you on these big boy saws makes me so jealous.

[@Morpheen999]

Buy the 362 lighter and more power then the 391..

[@InTheWoodyard]

Just get one! They are all great saws!

[@InTheWoodyard]

Maybe so!

[@ChrisLascari]

Good stuff, more Tony and a lot of cutting.

[@InTheWoodyard]

More to come! Thanks Chris!

[@GrandMarshallB]

Hi from Frankfurt, Germany. Just wanted to say that I really enjoy your channel and the relaxing, interesting and well made content. Just bought a 550XP MArk II - my firts Husqvarna - and I am looking forward to make some firewood with it.

[@InTheWoodyard]

Thanks so much for the kind words!

[@deanmoore420]

I still love my 500. I great chain saw. I still think the 500i is still quicker than a 462 great video enjoyed watching 👍

[@InTheWoodyard]

Thanks 👍

[@GrantReid35]

Chris great video guys Tony thanx to you to always great to see cutting fire wood,and it must be the best to be in between the trees like that coz I know it's the best free feeling a person can get you know,keep up cutting fire wood boys want to see the trailer loads full🤛👌👍

[@InTheWoodyard]

Thanks Grant!

[@waynetharp]

Looked like an absolute perfect day to be in the woods cutting! I sure wish both saw manufacturers made a dead wood oiler setting. All the way up is never enough oil for cutting dead wood especially with longer bars. It makes for alot of bar wear and chain plug ups like you had in video. The EPA or whoever cringes at the thought of 1 drop of oil hitting the ground need to help pay for the premature bar wear out...Thanks for video!👍

[@InTheWoodyard]

Yup, thanks Wayne!

[@deliverybryan1138]

I just traded in my ms 362 for a ms 462c today . I love it already !

[@InTheWoodyard]

Yup, nice saw!

[@matthewnasci2646]

Great score on firewood. And it's fun to cut trees with a friend. I could tell tony was holding off on the throttle. I cut my wood with husqvarna 562 and 372 and my dealer told me there was no break in period for them. But I didn't hold em pegged for a couple of tanks anyways, figured it couldnt hurt. And I agree chris, that using pro saws is the way to go. I'm not in production but you can't beat the speed and power.

[@InTheWoodyard]

I have run a 562 and it is a great saw!!

[@halliwilljon]

Videos are out of order,,,not that im complaining. Was curious to see how much wood fit in the new trailer.

[@InTheWoodyard]

Yup, it happens some times!

[@InTheWoodyard]

Yup!

[@dprince86]

Picked up a 572xp a few weeks ago love it nice addition to my 550xp and Echo 590 Timberwolfe

[@InTheWoodyard]

Nice, you will like it, I have 2 of them!

[@richardbrowne1679]

Good Job Guys: What a great place for getting firewood! My go to saw is the Husqvarna 550XP with a 20 inch bar.

[@InTheWoodyard]

Thanks, we have work to to.

[@thebradleysoncatbirdhill6849]

Great video! You guys were having too much fun! 💪👍

[@InTheWoodyard]

Thanks for watching!

[@survivingwith812catfishing]

Good to have a good friend to cut wood with.

[@InTheWoodyard]

Yup, I just need to find one....soon....Jeremy!!!!!!!!!

[@swere1240]

youd be surprised what a bark box/egen straight shot muffler and a maxflow air filter will do to most new stihls. yes they are loud but when u consider the close to 1hp gains on top of a saw that cools better and has better throttle response its worth the extra 100-150 bucks. i also like the 461 over the 462. alittle more displacement. and i like a 24 inch bar too i only like big bars when i gotta stump a real big tree thats like 4-5 feet across. 28 isnt bad either if its a lightweight bar. great video though keep it up. i gotta get ready to go take out a goliath ash tree for the city. bringing the 088 along for this one lol. its gotta be 5 foot at the stump. luckily city trees are always right by the road so we can use a bucket truck. if it was in a backyard that would suck lol

[@InTheWoodyard]

Yup, a big tree needs a big saw! Keep cuttin'!

[@DanielAtkinsFirewood]

I went from a Sthil 211 to a 461 and yes you are right.. Wow what a difference in power.. Makes me wonder if my next splitter will be the same..

[@InTheWoodyard]

Yes! It is a big difference!

[@bjorn-e.t.6198]

Hi an arborist/faller from germany here i used to have a 362 c-m and an 500i besides my t200 and my 550 mk2 well with the 462 c-m i now have only a 3 saw System i got rid of my 362 and my 500i and it works great ... i recently got my seccond 462 i run one with a 20 inch Bar and one with a 32 inch (wich it Handels amazingly well to my suprise ) i am one of the rare guys in europe who loves to work with his long Bars its true most guys Here use 24inch Max. Rarely you See anything above but i am quite tall (6.7/6.8 ft) and quite young (close to the 30s) so weigth and legth are not a big concern for me I really dont miss the 500i (wich is a amazing saw by any means but the 462 is just more for me) and for the really big stuff or for milling i have an 088 from i think the very eraly 80s wich is just one Bad mf and i am still a bit Nervus using it ... its just a raw old beast... but its runnig for nearly 5 years with me and i am at least the 5th owner of that worksaw style ported dinosaur 🤣 Cool video keep it up greetings from germany 👌🏻

[@InTheWoodyard]

Thanks so much for watching and you great info!

[@TravisDoesFirewood]

Would love it, if you haven't already, do a calculation of the cost effectiveness of felling and bucking free trees v. buying a truck of logs. Thank you sir for your videos!

[@InTheWoodyard]

I have done videos on it a few times and will again, but I make more buying log loads.

[@shanemeiszner8685]

Never thought about using a small saw to measure and mark the size to buck before will be using this in the future 👍

[@InTheWoodyard]

It is an extra step but it does work nice!

[@bentwedgestanleybrand5818]

Good morning everyone

[@InTheWoodyard]

Hello Stanley!

[@petertaylor7483]

Do you guys cut the stumps off closer to the ground?

[@InTheWoodyard]

No, the land owner want most of them left high.

[@ThomasDercole2230]

I love the way the Husqy sounds over the Stihl.

[@InTheWoodyard]

Me too, they sound angry!!!

[@coreyriley7160]

G’morning Chris. Sweet looking saw. Wonder how it stands next to the 7310 ? Good show today. Thanks ! GoodNightIrene

[@InTheWoodyard]

I ran it and the 462 and 500 are very similar.

[@beyondourarena2207]

about bar lenght, here in France, for a personnal firewood, most people use 16&18" bars. The forest pro mainly use 20" bar, even for largest trees.

[@InTheWoodyard]

Yes 20" will cut most trees!

[@georgehofgren6123]

The French aren't that bright.... also tore all their HydroElectric facilities out 🙄 ~

[@thefirewooddoctor]

What do you think of Tony's magnetic stick on a small saw to mark with?

[@InTheWoodyard]

It seems to work good!

[@MichaelRichards-l2u]

I use something similar

[@stanleykeith6969]

They guy that shows up in the back ground @ 17 59 / then he comes back @ 18 02 / looks like Joe from Joes firewood channel 🤣🤣🤣

[@InTheWoodyard]

HA! Maybe it was! No, it was the land owner I think!

[@BruceMyersLBZ]

Still like the 572's better? Being familiar/ comfortable with what your used to, it is hard to.change. almost everyone in these parts runs stihl, but I still run husqvarna's. 562, 550, 346 n clunker xp'd 350 for brush/ ladder work. All ported and love them all. Recently sold my like new 372, getting replaced by new dolmar 7900 soon. Cant justify cost of new 390, n keep hearing great things about the dolmar, so I'll try it for my "stupid" size wood I seem to encounter more frequently.

[@InTheWoodyard]

Yup, I hear good thing about Dolmar saws.

[@ihfarmer2456]

Sure would be nice if you put your videos out in order. One episode you have a new trailer next one you have the old one. I'm all sorts of confused but in turn that dont take much. Just kidding. Love the videos no matter what the order is. 🤪👍

[@InTheWoodyard]

When I have a new big deal, saw, trailer, tool, I put it ahead of other videos.

[@haroldanderson2781]

My two favorite four letter words put together. FREE WOOD!!

[@InTheWoodyard]

YESS YESS!

[@NorthernWoodsmanElite]

Nice to see a real saw in the wood yard 😁

[@InTheWoodyard]

If they cut they are good.

[@Kokoras1980]

Καλησπέρα στην Αμερική εγώ είμαι από Φλώρινα Δυτική Μακεδονία Ελλάδα 🇬🇷🇬🇷🇬🇷🇬🇷🇬🇷 Έχω και εγώ το 462 cm πολύ δυνατό αλυσοπρίονο είμαι πολύ ευχαριστημένος. Και εμείς εδώ έχουμε κρύο χιόνια από 1 Μαρτίου χιονίζει βρέχει έχει ήλιο έχει κρύο τα κάψαμε όλα 10 τόνους ξύλα 7 τόνους πέλλετ και συνεχίζει από Δευτέρα λέει πάλι βροχή Χιόνι για δύο μέρες. Πολύ ωραία δουλειά μπράβο σάς 🔥🔥🔥🔥🔥🆗❤️

[@InTheWoodyard]

So sorry, I only do English, but thanks for watching!

[@davidedwards3734]

Great cutting in the honey hole of wood!! How did Tony hold back on the trigger?? Seems like it would have been difficult. Have a Safe Day

[@InTheWoodyard]

Good question!

[@JamesJohnson-qy6ce]

so was wondering why you guys dont just pull the splitter there and split it on sight ??? getting older , it gets harder to lift n load them bigger rounds.

[@InTheWoodyard]

We might do just that!

[@yahmus]

Have you ever tried Jason Egan’s Straight Shot on your saws?

[@InTheWoodyard]

Nope, what is it??

[@InTheWoodyard]

I see they are sort of mufflers so I go deaf faster, probably not going to use them.

[@ishure8849]

G'day ITW, Jendobrah 😀My Missus is part Polish the frugal part I think 🤔. Tell Tony what you run in the Northern Hemisphere is a personal choice. Down under we have two choices Toyota and Stihl 👍🇦🇺.

[@InTheWoodyard]

Both good choices! Polish power!!!!

[@stephenbonawitz2751]

why didnt you get the sugi harra or tsmura bar

[@InTheWoodyard]

Because the dealer had the Husqvarna one.

[@fricknjeep]

hi there i thought his marking saw was a 201 . john

[@InTheWoodyard]

Good question, I am not sure.

[@iPhil77]

The longer the chain bar is actually less straining for the back and knees etc for the long term. The multi trailer comment from yesterday was if the landowner wanted to allow certain days to cut and then you wanted to get the most out of those days. That’s why I said multi trailers and a loading crew and chain crew.

[@InTheWoodyard]

Yup, thanks Phil!

[@darrenmorrow5697]

I was thinking about a ms400 it would be a good all rounder between my old ms260 and 288xp

[@InTheWoodyard]

Spend a little more and get a 462 of 500 you will thank me!

[@craigunderwood4353]

I'm looking at both saw's, trying to figure out which one is the better saw?

[@InTheWoodyard]

I like all saws that run well and are sharp.

[@rickthelian2215]

Question from the Woods How far away is Tony’s Woodyard? How far is your Woodyard Chris? Just so we can get an idea how far you both need to travel.

[@InTheWoodyard]

Tony is 5 miles and I am about 40.

[@rickthelian2215]

@@InTheWoodyard just thinking of all the trailer loads...😀

[@halfdollar86]

What model is that Husky he was using?

[@InTheWoodyard]

I was cutting with a 572xp. Thanks for watching!

[@craigunderwood4353]

I thought this was a ms 462c video, and all I see is the husky?

[@InTheWoodyard]

Must be a better saw??? HA!

[@bobnboof397]

Ooo Trusty rusty is back

[@InTheWoodyard]

This should be the last video with it!

[@DeliveryBryan]

I have the Ms 462 CM R and it runs pretty good with the 28 inch bar .

[@InTheWoodyard]

Yup, good saw!

[@DeliveryBryan]

@@InTheWoodyard it runs better when you get a WCS bark box muffler and get the other parts of the muffler opened up and a good sharp chain and filed rackers !

[@jeanvaljohn3921]

Enlightening video. Do you have a preference ? Would you rather cut by yourself or do you like company on a regular basis.

[@InTheWoodyard]

As far as Stihl? the 500 is awesome but for less money the 462 is really nice too!

[@thefirewooddoctor]

Just sold some wood to a guy who ran out! Needed a little but to finish off the heating season.

[@InTheWoodyard]

Yup, that happens a lot in the late spring!

[@noahh8253]

Beautiful saw! As always nice saw work gentleman. If you do not mind me asking, how far is the drive from your woodyard to your new score?

[@InTheWoodyard]

Thanks, Tony is about 5 and I am about 40 miles.

[@albertbuikema4451]

@@InTheWoodyard would it be worth bringing the tractor there and cutting a few log truck loads and having them hauled back instead of bucking it all on site? With that amount of wood you could probably cut and stack 2 or 3 loads a day and have it trucked back for a reasonable price? Not judging by any stretch but I'm at least always curious about the "method behind the madness" lol.

[@noahh8253]

@@albertbuikema4451 that is exactly what I was getting at!

[@rockymountainfirewood3873]

New toy. Nice! It's frustrating watchin that oak being cut. It just doesn't grow around my place!

[@InTheWoodyard]

Yes, it is great firewood!

[@drich12]

another great video! you guys really need to try out the Echo CS-620P! its a beast

[@InTheWoodyard]

I did use a 7310 Echo a few videos ago, nice saw!

[@peterbonaccorsi3445]

GP OUTDOORS says that's 462 was his best pick in his review of chainsaws,

[@InTheWoodyard]

Yup, it is a great saw!

[@Brian-Outdoors]

Man I want in on helping you guys cut down some trees at that location. Just plain good exercise and entertainment and I work for free. I have plenty of saws. Betting the new toy is a Husqvarna 592XP like mine which is an awesome saw. Let me know how I get in on the fun.

[@InTheWoodyard]

The owner does not want a heard of people he does not know on his land, I would do the same. Thanks for the offer.

[@Brian-Outdoors]

@@InTheWoodyard roger that.

[@tekaaable]

This is so much better than tv :D

[@InTheWoodyard]

Thanks , this is the new way for sure, youtube is all I watch!

[@catog9991]

About Europe: At least for Nordics (Norway and Sweden as examples), most use even smaller bars. They mostly run 13-16" and in general smaller saws (40-60 cc range), most farmers etc wants lower weight and flexibility. There is a nice channel to see how professionals in Sweden work, unfortunately it is in Swedish, but I highly recommend to have a look at a few videos to see the technique. He is called "Oslättfors Trädfällning", I'm sorry if I'm not allowed to post other channels here and please tell me to remove it, if so.

[@InTheWoodyard]

Yup, they mostly cut smaller soft wood and birch. Or trees are mostly VERY hardwoods and bigger here (west coast trees can easily be 4-6 foot wide (well over a meter) and we like bigger machines too I guess!

[@jeffpeters1014]

Hey Chris tell Tony to check out Perry suspenders, the best on the market!

[@InTheWoodyard]

You just did, he reads the comments! Thanks Jeff!

[@TonysCoolTools]

Jeff I do have a couple pair of Perry suspenders. I like them for my jeans but prefer the Husky wider straps for my chaps which are pretty heavy

[@ingcampthree4523]

New to the channel, but a life long Wisconsinite. My tree farm is in Forest County, where abouts are you?

[@InTheWoodyard]

I am from Appleton, but up at my brothers in Park Falls area now..

[@ingcampthree4523]

My place is about 80 miles from both locations. I am in the other part of the National Forest. Keep up the good work…

[@steveyork8069]

Was that a homemade tool you were using to measure with.Would love to know more about it.👍

[@InTheWoodyard]

Yes it was, I have a few videos all about it on my channel, it is a zip tie!!

[@Frank-db6oj]

Great work 👏 Thanks for sharing 👍

[@InTheWoodyard]

Thank you too Frank!

[@nickwallace9955]

Hey Chris, I recently started to try and identify trees and just a suggestion maybe you could mention in your videos what type of wood your cutting. Is that White oak tony and your were cutting?

[@InTheWoodyard]

I do try to mention most tree type as I cut them, I will do more!

[@Lifeinthe906]

The wood honey hole is awesome. Drop all the trees in the open field! Don't get any better that that. GNI

[@InTheWoodyard]

Ya, and the woods are pretty open too!

[@danthornton5098]

Good cutting!😁

[@InTheWoodyard]

Thanks!

[@zeeb696]

One looked like a husky?

[@InTheWoodyard]

Yup.

[@markhowes126]

Tony your a brave man. Cutting wood with Chris is like playing basketball with Michael Jordan. Of course they're both getting a little long in the tooth. Lol 😆 🤣 😂

[@InTheWoodyard]

HAAAAA!

[@Jezzy535]

Wow, great stuff....all that wood...yar a lucky lad...If you fell of a roof you would go up

[@InTheWoodyard]

Thanks Gerry!

[@kaifel7539]

I make per year roughly 60 cubicmeters of woods (25% hard wood, 75% pine trees). I want to replace my MS 440, YoM 2003 with a 20" sword, soon. I really dont know, if it will be the MS 462 or the MS 500i. My STIHL dealer gave my the MS 500 for testing and I must say, this thing is a Monster. Otherwise I try to stay away from electronics when it comes to Chainsaws. So I am more smiling at the the 462. Greetings from Germany

[@InTheWoodyard]

Yup, the 462 and the 5oo are great saws!

[@hp1468]

I'm just wondering why don't you cut at ground level? Here in Europe we cut all of the tree so the stump is very short. Exception where the stump is longer is if the area is sloped. ( As a joke we say: the one who cuts at waist level is stealing wood, because he is too lazy to bend)

[@InTheWoodyard]

I do cut my stumps off most of the time, the land owner wanted them left high, so I did.

[@hp1468]

@@InTheWoodyard OK. Maybe he will cut it. I have just seen your video with 592 XP and it can cut, and I watched it on 1.25 speed so i was even more impressed.

[@MichaelRichards-l2u]

Many times if the stumps get removed with a dozer they prefer to have high stumps.@@hp1468

[@markatkinson9963]

Huh? No 592?

[@InTheWoodyard]

Soon! More of it, soon!

[@buckeye_bear6130]

The 400 is more than 60cc, it’s actually 67. I recently bought the 400 with 20’ bar and it’s a fantastic saw. Only 5cc less than 462 but weighs less too

[@InTheWoodyard]

Yup, I ran one and the 500 is a much better/faster saw in my opinion and the 462 is also.

[@timtorkelson7201]

Stihl chain needs sharpened!!

[@jasone679]

Chris and Tony, just wondering about the brush, do you have to pile it up or is the property owner taking care of it?

[@InTheWoodyard]

The owner chips it up!

[@jasone679]

@@InTheWoodyard perfect

[@dennisconlon5810]

It’s always more enjoyable felling trees when you can dropped them in an open field.😎

[@InTheWoodyard]

Yes, hung up trees are not fun!

[@robbobcat7286]

guessing new trailer

[@InTheWoodyard]

Yup!

[@ДЖОКЕР-Сила]

Скажіть ваша думка пацани яка краща пилка штіль чи хускварна ?? На мою думку 462 сама мошна і сама легка !!

[@InTheWoodyard]

Sorry, I only do English. But thanks for watching!

[@ДЖОКЕР-Сила]

@@InTheWoodyardok!?)

[@ДЖОКЕР-Сила]

@@InTheWoodyard I ask you what model you like best for you 462 or husqw. !?) thank you so much!₽

[@ДЖОКЕР-Сила]

good afternoon i want to ask about the saw which do you prefer stiletto or husqvarna? all my friends mostly say that the stalk is the best saw because it has great power and light weight

[@pvwjr]

Love Tony’s cutting chaps, his true colors are showing. Probably has Husky underwear. Admit it Tony, you’re finally coming out of the closet. Put down the crooked cutting Stihl and pick up the Husky, you know you want to!! Tell him Chris, feel the power of the orange side!

[@TonysCoolTools]

Remember I’ve often said I’m non-denominational when it comes to tools. I love my Husky full wrap chaps and hookaroon. I would love to own a husky saw and that may happen some day🤞

[@InTheWoodyard]

I think he wears a Husqvarna thong! But I do not know for sure and don't want to know for sure!!!!!!

[@InTheWoodyard]

To go with your HUSKY THONG??

[@pvwjr]

@@TonysCoolTools Just busting your chops Tony, it looks like a really nice saw. You have the best toys and now all you need to do is raise monster elk to compete with Jason from NM, then Chris will love you again. Tough to compete with an elk like that, it was a beauty!!

[@KillingerUSA]

Team Tony! Haha! I think I just love all chainsaws?

[@TonysCoolTools]

Chris I agree with you 100%, if it’s sharp and it cuts who cares about the brand!!!

[@InTheWoodyard]

Yup, me too!

[@InTheWoodyard]

Yup, that is because you are smart!

[@oakrunacres2564]

After I bought my MS462c I bought a used MS362c a second/back-up saw. I had used other 60 cc saws previously but I was so used to the power of the MS462c that I thought there was something wrong with it. It was just so slow in comparison. It got so I didn't want to use it. I sold it and bought the MS400c which is only a few cc's more but for whatever reason runs a lot faster and would keep up better with the MS462c. Just like Tony I now have a MS500i and MS462c. I find the 500i better in bigger wood. It tends to four-stroke a bit in smaller wood. The 462c will run right with the 500i in the smaller to mid-range stuff but if you get into anything really big the 500i shines. Nice work out there boys. I look forward to seeing your progress. It looks like you could be there for as long as you want to keep going. Dave

[@TonysCoolTools]

Dave you’re spot on, I had my 362 on that trip and after using the 462 at half throttle and 500 wide open it seemed I was waiting forever for the 362 to finish a cut. Don’t get me wrong the 362 is a great saw but we’ve gotten spoiled with more power on the 462/500i saws.

[@oakrunacres2564]

@@TonysCoolTools If you've only ever used 50-60 cc saws then the 362c is a great saw. Once you get a taste for a 70+ cc saw with a 24" bar for standing up and bucking 12" + wood it's hard to go back. The 261c, 362c and other saws in that class are great for smaller stuff, limbing or if you have physical limitations that prevent you from using a bigger heavier saw..... Although the 462c and 500i aren't a whole lot heavier. No let's talk about those Husqvarna chaps and suspenders you were wearing. Are we going to have to put your Stihl membership under review? 😁. Dave

[@InTheWoodyard]

I agree with all you said Dave, right on!

[@InTheWoodyard]

Yup, me too!

[@InTheWoodyard]

HAAAAA!

[@sloth9669]

That amount of wood I would call around and contract out a log truck.

[@InTheWoodyard]

It is not my land and the owner does not want logging equipment on HIS land.

[@andrewsamanthamadison3320]

Tony rockin Husky suspenders??? Tony, come on bud you’re better then that! 😂

[@InTheWoodyard]

His true feelings are showing!

[@LitltsLogging]

That's what you call gravy cherry picking cutting there!! That's how it should be cutting firewood hahaha!! Good for you two out there! Stay safe my friend

[@InTheWoodyard]

You got that right! Thanks Tim!

[@tbonemc2118]

Does your tractor with grapple fit in your new trailer? The logistics of what you're trying to do are a worry. I think this new lot is over an hours drive from the woodyard and on a good day you might fell and buck a trailer load or 2 cord and get it back to the woodyard. With a log landing using log trucks you'd save over 7 return trips in your own truck for every log truck. Hiring a log truck isn't cheap but doing 7 return trips in your truck isn't either. Using your tractor you'd probably get close to felling a log truck full in a day or maybe two and what a great time for Ken to pay a visit. It's your choice but using your truck you'll get 4 cord in two days compared to 16 to 32 cord using log trucks in the same time. You could come out of there with a couple of hundred cord in two weeks. You might have to divert a few trucks to Ken's and Tony's though.

[@InTheWoodyard]

The owner does not want big logging equipment on his land.

[@turklayher4794]

Lots of wood 🪵

[@InTheWoodyard]

Yup, there sure is!

[@ciphercode2298]

Everytime someone offers me free wood it's over a hillside 20ft tangled in briars,lol. Liking the 462,and though I know husqvarna makes a good saw,they're not for me. Never really liked their outboard clutch and crank bearings,but that's just me. I run a 441cm as my 70cc saw and aside from it being kinda heavy it's done great for 10+ years pulling a 28" bar. If I were to buy a new bigger saw itd probably be a 462.

[@InTheWoodyard]

The 462 is an awesome saw!!!

[@cerberus0413]

Man I sure hope you rented that guy a chipper to clean up all those tops after taking all the primo stuff out.

[@InTheWoodyard]

He gets a chipper when he needs one and chips it himself!

[@brucearney9536]

Nice to cut with someone , safer also . Have a good time .

[@InTheWoodyard]

Yes, thanks Bruce!