MikroTik Tutorial 10 - Bandwidth Management Using Simple Queue

[@tzauron]

This is the best tutorial I've ever seen for this, thank you

[@abdaleali609]

Same but u will not get reply if u ask him question.

[@joes3989]

man just to say I love your videos, so easy to learn and you go through everything at a good pace. really great video :)

[@tonyg9735]

Great video with the best clarity on all network lessons on this platform. Mikrotik should make you their public/virtual master trainer. Question: I am using OLT with GPON protocol. How can I use the router to give a guaranteed bandwidth to any ONU? The ONU uses MAC to register with the OLT. I look forward to your suggestion. Thanks in advance.

[@vidurmittal4196]

Excellent Videos, very-very helpful - you've been God Sent for me ! Good health and best wishes !

[@ishiishi8847]

You really make things more simple to understand man. Thx a lot

[@User-on2nt]

Thank you! as my computer was pumping out my entire connection there is nothing left for other devices, even if I have a good connection. Thanks to this solution, it’s better.

[@Superspace8]

thanks for the videos and for the high res. It makes it much easier to see exactly what is being displayed/typed.

[@TKSJa]

You are welcome

[@serhioromano]

Does not work for me. I create so many different queues but when I speed test on PC or mobile it always show maximum available by provider.

[@kevinblac2203]

If you are here and wondering why your simple queue is not working, disable "fastrack" in firewall rules

[@baktashpoya]

Tnx bro

[@Booki89]

This was my issue

[@lucasherman3730]

Great tutorial. Nice calm music in background.

I'm reset it without the default configuration. Created a mikrotik as a switch (bridge and ports). When I create Queues there is no traffic on it. I can't find where I went wrong. If possible help (second opinion). Maybe I'm going around in circles and can't find a way out.

[@dotsudan]

Excellent, clear and focused

[@farazkhan0000]

Good job bro love from Pakistan 🥰🥰

[@michaelmuraguri7342]

Amazing tutorial, straight to the point

[@bayoumaroon]

Love your videos, super helpful and to the point.

[@piotr424]

Simple queue not working if is unchecked in bridge setting checkbox "use ip firewall". Not working qos on IP address and in/out-bridge-port in firewall in MT.

[@Martingale021]

Thank you for this incredible tutorial.

[@joebleyor]

good and useful video, I feel the Jamaican accent very much

[@keshanwilliams8220]

How do I create queues for clients in different groups, for example 2 Mbps, 4 Mbps and 6 Mbps clients etc? If I use simple queue in a dhcp server, what happens when a client IP address changes? I would appreciate a reply.

[@martinmdp82]

Hi! Thanks for the video, i wonder if is possible limit only the "internet" traffic but not the LAN traffic of a specific subnet or VLAN. Thank you in advance

[@computeguru3526]

This particular configuration does not affect local LAN traffic

[@6i668]

Hi TJ thanks for all these wonderful videos. After I have finished doing a backup the file is there and I can see it and copied it to desktop, but the file wasn't there when I looked for it the next day, can someone explain this to me it happens every time, thanks

[@uyiogankpolor4502]

Hi Thanks for this . I need your help with doing this for an Access Point .I have a Unifi fibre optic device from the ISP which i can't get into and i connected a Mikrotik Cap Lite as the AP but i need to enable QOS on the AP is this possible please

[@arttheseven5526]

Currently I am using my asus wifi router' bandwidth limiter but it has limitations. Can you set mikrotik router's bandwidth management for example there is currently 1 user(A). User A can utilize max DL and UL speed. When additional users connect(users B, C, D), can mikrotik automatically divide the bandwidth to these 4users? And vice versa.

[@dennismwangangi]

mine doesn't limit. I can see the traffic but according to speedtest and interface there's much igher speed for example I'll do a speed test on pc and I get 80Mbps, but my queue is speed is 1less than 256kbps. Does that meean there traffic beeing unaccounted by Queues?

[@lopeskaczor]

For me, this method does not work. Does the rest of the router configuration affect this? I started MT with the wizard and that's it. Then I added these rules from your video I entered correctly and nothing limits my test client on my network. What could be wrong?

[@ludovickengne3435]

Very good explained, thanks for this lesson

[@TKSJa]

You are welcome

[@teacher_bernie]

master can I get MTNCA cetification by following all your tutorials?

[@akiraG24]

I make Lan interface and connect my router to it. And limit the bandwidth through a simple queue? Is it okay? just for home wifi.

[@icetea6802]

Hi great work out there. Please how do i queue just a port (let's say port 4)

[@stanleemoks]

What target IP should i use if i want to create a parent queue for IP's on different class i.e 192.168.5.2 and another 192.168.6.2. Is it possible to have such a parent to cater for both IP's?

[@mikaeladingra4238]

Thank you so much brother, Can you do for us a video about how to configure Web proxy on mikrotik router, and cache. Please it's very important we need it.

[@JenicekUK]

Is it possible to setup 4 users IPs - all of them unlimited, but limit to quarter when user connects - downloads - reason is - I would like to reach peak on each connection, but limit when we all watch netflix and so. What would be best solution?

[@daulume]

Hi Thanks you so much for the tutorials. by the way, can i tell you one of my problem which I used pppoe for LAN clients? Problem is WAN traffic is always higher 200-300Mb than LAN client traffic. we are running ftth project right now. if you were know that how could i fixed to be the same traffic. thanks.

[@auxxx]

thanks man, just what i needed

[@daxedwinleevilbar6124]

Can you set a range of IP Addresses in the simple queue?

[@cplzero3]

Does priority in simple queue work if there is no parent queue? queue type is default-small. thanks

[@jordongordon1770]

Hello i really appreciate the help that your videos have gave me over the year on how to configure my mikrotik router, the configuration works for the regular rb750 but i bought a rb3011 UiAS-RM and I've been having problems with bandwidth control for individual clients, also port bonding and load balancing and I've been unsuccessful with following your other videos on that, id really appreciate if you have any advise or can provide me any with technical support on that, thank you.

[@charlesgregory1768]

did you manage to solve this?

[@shakilahmed-ho7mi]

Can i will Brandwith speed limit by Mikrotik RouterBoard RB951Ui-2nD hAP others router ?

[@mikebrown354]

Can this be done targeting ether port instead of IP addresses?

[@farhadmobilesolutions8610]

How can I set a burst queue directly on pppoe>profiles>limits settings? A simple queue normaly I set typping on Rate Limit (rx/tx), but I want to type Burt limit, burst threshold and burt time directly on pppoe profile, is it possible? how can I do this? Thanks!

[@TKSJa]

There is no settings in pppoe pprofile for that feature

[@narmadainfosys3381]

If I create a child queue with a static IP the parent queue also stops working. Why? I am on 1100ahx4

[@qammars1977]

Why only limited routers you mentioned work for this setup? I have RB1100AHx2 and RB1100AHx4 and CCR1036-12G-4S. Also going to buy CCR1009 series soon. Are these new routers doesnt support HTB ? I updated my RB1100AHx2 software and now I have Bucket size option in Queues but still this option is not working. Do we need to make some changes in Mangle also before this simple setup? Also make a video and show how HTB works for PPPoE setup. Thanks

[@TKSJa]

It could be fasttrack causing the issue kzbin.info/www/bejne/bH3Eopt6opuDfqs, remove it and reboot. For simple queues you don't necessary need to mangle rules.

[@EbinRaj110]

Hello, for me the upload shows but the download doesn't. What could be the reason?

[@Namtrooper81]

Hi. Sorry to bother you. Just point me in the right direction if there is a different video explaining this. Situation as follows. I have a 10mbp down 2mbp up connection. I'd like the STANDARD connection speed for devices to be 2mbp down and 384K up unless I create a queue to increase speed. I tried lowering the "all bandwidth" queue to the required speeds and I placed it last in the list of queues but it does not have the desired affect. Any advice?

[@Namtrooper81]

Anyone?

[@atoscolabaiden3734]

Good afternoon, I'm Ato Baiden from Ghana and have been flowing you lesions and it has been useful to me. Thank you. But have issues with my Mikrotik Routerboards (RB951Ui-2nD hAP) it keeps disconnect when i click Quick Set, when i try installed Packages it dose the same and others. Kindly help me out cos i 3 Routerboard which are doing the same

[@TKSJa]

That's strange, connect to them via mac and see if that helps.

[@FanaK-uh1hj]

So queues have been created already and for some odd reason i cant edit it.

[@vokurka-net]

Hello, I thank you very much for that guide. I would like to ask you if will be possible set up it in other way. Everybody in network will have slowly (shrink internet speed) internet connection, but only selected clients (IP addresses = which I will set up it like permanent IP in DHCP server) will have unlimited internet speed? E.g. root rule of Queue will be set like 192.168.5.0/24 with limit internet speed to e.g. 256kbps/2Mbps. But e.g. only surveillance server (192.168.5.254), under main root Queue rule, will have e.g. 2Mbps/10Mbps? I thank you very much for your answer, before.

[@TKSJa]

The parent (root) queue should be assigned the maximum upload/download of your internet connection. Then you can assign the child queues with a lower or equal bandwidth to that of the parent. Eg. Parent 2Mpbs/10Mps child1 256/2 child2 512/6 child3 2/10

[@Random_videos274]

Is there a way to create a simple queue that will give X amount of download and X of upload to anyone on the network even if i already have some simple queues made ? for example if i have a new user on the network to automatically give that user 1 mb up and down and keep my other simple queues at 3mb ?

[@TKSJa]

All you have to do is to create child queues for each user under the main queue and set the download & upload.

[@mjsun42]

Really nice tutorial and I have been learning a lot from it ! One question regarding the simple queue. You created the 'All bandwidth' first and then another 2 queues ' client 1' and 'client 2' as child queue. why not directly create client 1and client 2 queue ? what is the difference between " all bandwidth + Client 1+ Client 2' and just two separate simple queue 'client 1', 'client 2' ?

[@solomonflomey2173]

To the best of my understanding and per his explanation, you can decide not to create all bandwidth and go ahead and create the other two as describe, the purpose of creating the all bandwidth is for the entire network. But should in case you discover a particular ip address over untilizing more of the bandwith that when you can isolate that particular ip address but it has to be linked with the all bandwidth if created by using the parent. Hope i answered you well.

[@vickeyhort]

I have setup a hotspot bridge on ethernet 2& 3, and a lan Bridge on ethernet 4&5. Ethernet 1 is WAN. I have 20Mbps internet package. How can I prioritize the internet speed on hotspot bridge? Suppose if there are 5 users with 1Mbps each on my hotspot bridge, then rest of 15Mbps should only go on LAN Bridge, if there is no user using internet on hotspot bridge then complete 20Mbps should go to LAN bridge user? May someone pls help?

[@vickeyhort]

Previously, I had setup my all devices with hotspot and prioritized the internet depending on User Profile. But I had issues with some devices getting different Address & To Address. Even set address pool to none in User Profiles but the issue persisted. So i decided to separate devices in to hotspot and lan bridges. Now I want to prioritize the internet speed on hotspot.

[@ssiseries7514]

How to give CIR/Dedicated/Gurnted bandwidth to user also having sahred client in that mikrotik.

[@MrWettissue]

how do i mak a guest access and limit it the DL and UL??

[@123kesh321]

Hello sir, i want to give priority to users connecting to our company website. i have a 2mbps up/down link with main purpose of connecting to our company website. i have created address list of our websites ip which are static and dont change, marked the packets. how should i configure priority to those packets. i use RB450G provided by our isp. Kindly help

[@abdelghafourdh883]

is there a softwear that i can use because i have a dlink router and the qos settings are kinda bad i can't really work on it

[@TKSJa]

Get a MikroTik router

[@tiaanprins2903]

Hi. Can someone show/tell me how to prioritize streaming over Downloading and setting a rule where the speed will never go below 5mb/s or higher than 15mb/s

[@qammars1977]

This is the good way to manage the bandwidth, Specially when sharing a specific bandwidth among specific users. Like sharing 10 Mbps among 4 users having 4 Mbps package. 4 x 4 = 16 Mbps . I had tried this on the same ROS version 6.38.1, but when I select the Parent Queue my client Queue doesnt change and stays on the same place.... Any Idea ?

[@TKSJa]

You should set a dw/up 10dw/1up limit for the parent queue and the child queue 4dw/1up for each. I don't know you upload speed so I just guesting by putting 1mbps.

[@qammars1977]

TKSJa I have total 25Mbps dw and 10 Mbps upload available on that site. I made the child queue with 4mbps download and 512kbps upload. But the point is that when I add parent queue in advance option the child queue doesnt move a bit forward. What could be the reason?

[@GhostProtocolMI]

it not working for client using static IP.. only working for client receive dynamic IP.. need help.

[@SimpleTechMar]

nice one sir..thanks

[@TKSJa]

Most welcome

[@rambegol868]

haruskah membuat ip address terlebih dahulu agar client mendapat bandwitch yang sama?

[@mikkio5371]

this are for static ips i guees . how do you quee for dhcp ips

[@solomonflomey2173]

Hello sir, is there no way we can use a MAC address in place of IP address because of DHCP allocating the IP address. Thanks

[@TKSJa]

I don't thinks so

[@alexismarcuz1932]

hello sir.. do you have pppoe server and client config ang bandwith management?

[@RenatoGrelloni]

thank you for your videos. Very informative. Is there a solution to limit bandwidth for Wifi users.All at once not with i.p.'s Thank you in advance

[@Jake4]

Yes against a whole subnet

[@TKSJa]

That's right

[@zoliexerugat1555]

Thanks for the tutorial.. it is possible to reduce bandwidth speed or block application in mikrotik?? example is facebook.

[@TKSJa]

How to block Facebook: kzbin.info/www/bejne/Y3mon6aIi8qVfKs How to limit speed KZbin (this can easily be change to work with Facebook): kzbin.info/www/bejne/goTNnqCsaLGmmsk

[@TomLouwell]

Is 32MB RAM enough to handle these task? Mangle rule + 2 DHCP Server + Simple Queues?

[@TKSJa]

yes

[@omarcheevers]

Good day my fellow jcan... can this be used in a router on a stick scenario? i install RouterOS in a virtual machine

[@TKSJa]

Sure

[@flixmowry1383]

why there is no traffic in my queues? thats why limit speed doesnt work to me

[@TKSJa]

Do this kzbin.info/www/bejne/bH3Eopt6opuDfqs

[@edwinswartz7084]

Hi how does this work and in hand with a ISP system?

[@TKSJa]

Use your client ip address for each queue

[@uknowimmad]

Sir how can we set data cap on users using microtik?

[@TKSJa]

You will have to use the Hotspot feature

[@nafeeskiyani2559]

How can we make login page and wifi custmer ad through the mac adres of clint plz tlme i m trouble

[@TKSJa]

You can edit the login page html file. Just ftp to the router and download the files.

[@ChristopherTenney]

How do I contact you with questions?

[@raffyradan9293]

who prevail simple quee or quee tree? if there are configuration both. Thanks

[@TKSJa]

+Raffy Radan Queue Tree is better because all the queues are processed at the same time.

[@raffyradan9293]

Thank you for your reply.

[@cmos080]

does this limit user bandwidth to 256kbps/1mbps or the entire network?

[@piotr424]

Usman Umar yes queue tree and mangle

[@MohammadaAprilianto]

what is yellow mean brother?

[@lazyswing]

how to create tree like your config? when you create parent and automatically like that. In my router i cant

[@TKSJa]

I will be doing some more videos on queues soon.

[@georgediakos9651]

How do I set bandwidth control in a large group of IPs (many PCs)?

[@TKSJa]

It depends what you want to achieve. You have to take inconsideration the type of traffic that you want to prioritize. I will be doing some more tutorials on QOS soon.

[@nikszero]

i was wondering about this too... can i somehow put "192.168.1.50-192.168.1.100" as the target?

[@arieharris7053]

Good day, I can not get the simple queue to manage the upload speed it does not limit the speed at all, any help?

[@TKSJa]

Try this kzbin.info/www/bejne/i5izkmeHZd6ai7c

[@arieharris7053]

Hi I have checked that and found no rules like that under my firewall. Thank you

[@TKSJa]

Check the IP address in the queue.

[@arieharris7053]

The IP's in my queue are correct, I can see this because it does limit the download speed but not the upload speed.

[@sawaljawab9302]

Can you explain more about upload speed is less 80% I am little bit confused about this sir

[@TKSJa]

The download & upload speed works together to make the communication between computers possible. The more upload you use the more your download will be reduced. In other words; if you are sending a large amount of data, then your upload channel will get full. If you try to download something big at the same time, you'll need some bandwidth going out to signal the sender that you are receiving the data. If your upload is so full to the point that this "ack" message gets losts, the sender stops sending - and your Internet will start responding slowly.

[@user-hy2qs3jz9h]

can you help me setting up my haplite via teamviewer?

[@TKSJa]

Please contact me with more details [e-mail]

[@ogrish15]

how do you configure egress ingress per port?

[@piotr424]

Julius Caesar you firstly must uncheck use firewall ip in bridge settings, then in qos simple select interface not ip address. If increase counters on rule, that working

[@jaycabalfin5481]

Is this applicable to all Mikrotik?

[@teacher_bernie]

As far as I now yes

[@jawadzargarian233]

great 👍

[@vincentseno4242]

not clear on the ip target.

[@meymean11]

hi guy can we manage bandwidth by asign it dhcp??

[@TKSJa]

First you must setup a simple queue then assign an ip range to the queue, just like what I did in this video. So each PC when assigned an ip from the DHCP there bandwidth will be automatically managed. This is the easiest way to do it.

[@meymean11]

+TKSJa ok thanks but u can make video to do it

[@TKSJa]

+raksmey dy More videos coming soon

[@meymean11]

+TKSJa okay sound good bro!!!

[@PromotedGossiper]

How to have unlimited time access? Not only 10mins?

[@prcomputers7693]

HI, TKSJa Please share with me all videos from 1 to end.

[@mirafzal7711]

hello bro thanks for this video I need video about Load optimized you no that VoIP http and other type's

[@TKSJa]

Noted, I will add it to my list.

[@mutukuc]

How can one Mitigate DDoS Attacks in Mikrotik

[@TKSJa]

Added to my list

[@earlsjrcomputer5208]

how to setup simple bandwidth all network single manage?

[@TKSJa]

Watch these: kzbin.info/www/bejne/g4Hbh4qiptKKhas kzbin.info/www/bejne/qKe6q2Vtr8Z_lbs

[@Neekk_Oh]

What do I put in Max Limit if my internet is 100/10 if the limit only goes to 10MB?

[@TKSJa]

Just type in the 100 in the field.

[@level8473]

How do I find the IP to put in the Target?

[@mctrafik]

Does not work. You need to link to / cover fast track here.

[@TKSJa]

MikroTik Tutorial 49 - How to remove / disable Fasttrack kzbin.info/www/bejne/bH3Eopt6opuDfqs

[@stefanosnkr2049]

Does not work for me

[@bikramthapa2687]

thanks bro

[@MawuviCan]

Thank you x 1billion

[@blendahmed7096]

Thanks

[@akashshrestha01]

Great

[@abdull8736]

thank you + Like

[@Aky3de3-y]

thank youuu... that accent though

[@lenleangztechnology3347]

okay good