TM SCAR H NGRS | 1130

[@adamsimo6691]

Hi man, really appreciate your work and videos, could you please help me? Got this tm ngrs scar h and I just can’t install an aftermarket bucking to it otherwise I get overhop with every second/third shot, the bbs aren’t passing through barrel easily (maple leaf) and prommy purple just can’t be set into because of its thickness, got myself a PDI 6.01 barrel with elvish tac r-hop, used the stock tm bucking and flat hopped it, now it’s working pretty well but got another problem and that’s the fact that every now and then the bbs going out the barrel to the left, could you please help me somehow? Thank you very much in advance

[@Eagle6Airsoft]

@@adamsimo6691 it’s complicated I’ve had a lot of problems over the years that are hop related, often the hop rubber takes the brunt of the abuse but truth be told it’s tolerance, it is what it is ie: the tm unit is very tight. So either you modify the rubber to not bunch when in a tight chamber or you fit thinner rubbers. They are all designed for normal aeg who’s standard hop unit is looser than an only fans model who’s retiring at age 25. Try different hop rubbers, or try something recommend. Theres a reason we fit certain parts, yes we want accuracy and range but we also don’t want to spend 10 years building each build. Sometimes compatibility is factored into our recommendations. When you walk off the beaten path and start cutting your own path, it’s sometimes a slog. The tm rubber was a good shout, it sounds like you resolved bunching issues but in turn found new one. R hop isn’t perfect, make sure it’s seated evenly on the patch failing that, at its core it sacrifices groupings for a flatter and potentially longer tragectory, which you then compensate for with heavy ammo. Try range testing on light and heavy ammo to show hop issues a little more clearly.

[@adamsimo6691]

Thanks so much for your reply, I’ve tried to wrap finest sand paper around a barrel and sand the hop unit from inside to make it more looser but it seems to be not enough, also I’ve reinforced the inner barrel to sit tight in the outer, I’ve ordered a several begadi buckings that performs well in my other guns, and to mention, I’ve got all set properly before cleaning the barrel, as long as I’ve cleaned it, it all messed up and removed the rhop patch from its place, also do you have some method to perfectly glue the patch to place? I’ve glued and removed it like 6 times to make it perfect.

[@adamsimo6691]

Finally done it, now it shoots lasers at 60m with 1,45 joules. The tweaking I did was to tighten inner barrel inside outer. By stock it was a bit wobbly, so ive wrapped two layers of tape around the hop up chamber and the pin that holds it in place in outer barrel, the outside when inner barrel comes out I’ve reinforced it by wrapping a piece of cut plastic from BLS bbs bag so it cannot move inside. Now everything is perfect. Still running the stock TM bucking that I’ve modified to flat hop and PDI 6.01 barrel with elvish tac rhop patch.