TMK 200 in 5,7 ton KUBOTA // TMK Tree Shear

You can get very nifty package out of small excavator and TMK 200. 🙌
It chews through the big trees no problem and the collector helps with the smaller ones! 🤙
If you have any questions about TMK's products please leave a comment and we will get back to you!
Visit www.TMKTreeShear.com for more information.
//
Pienestä kaivurista ja TMK 200 saa kyllä todella ketterän paketin metsään. 🙌
Se puree isommankin puun ongelmitta poikki ja keräin auttaa sitten pienempien kanssa! 🤙
Lisätietoja osoitteessa www.Energiakoura.fi.
TMKTreeShear

[@TMKMachinery]

Shear: TMK 200, Trubo cylinder and Collector Machine: Kubota KX057-4

[@jimharris472]

question .. probably silly but .. if you have a tilt head and you grab a branch on say a 45% angle , will the grab still be quick enough to catch it and secure it ?

[@TMKMachinery]

Hi Jim! That is a good question and it depends a lot of the pressure and flow rate one might get for the shear. The TMK Turbo cylinder would be the best choice for this as the smaller cylinder is so fast that it would catch the branch. But as I stated on a 45% angle you shouldn't have a problem if you have high enough flow rate, no matter the cylinder. 😊 -Jesse

[@BJR306]

What model sheer do you offer for a Yanmar VIO80-VIO100 ? and Price

[@TMKMachinery]

Hi, You can either go with the TMK 200 or TMK 300. Both fit okay to that machine. TMK 200 is little more lighter and smaller but it can only cut 200mm trees. On the other hand TMK 300 can cut up to 300mm trees but it's a little more heavy and bigger. It really comes down to what you need. For the price you can contact me at [e-mail].

[@downeastprimitiveskills7688]

I was going to ask if you have put these on tilt rotators, yup

[@TMKMachinery]

Hi! We have put these on tilt rotators, for example here is a quick example: kzbin.info/www/bejne/aqPQaHt3gJyfgpY The amount of shears going to excavators with tilt rotators are constantly increasing, but it brings a set of challenges. You have to push the hydraulics for the shear through the tilt rotator which restricts the amount of pressure and flow, and you can't pull any electric wires for the attachments that use those (mainly collector). But in recent times we have made a wireless "package" that allows the use of the collector without pulling any wires and we also have our own patented Turbo cylinder which can be used with a lower pressure and flow than a normal cylinder. If you want more in depth info about any of these, just email me at [e-mail] :) -Jesse

[@downeastprimitiveskills7688]

@@TMKMachinery Thank you, I will reach out via other means for more info.