Fixed gear 26” frame swap/build (Peugeot Black Rock)

Thanks for checking out the video! I’ll leave a link below and some of the build info
My Instagram: / toastyrides
Music by: bensound.com
Bars: Nitto B802
Stem: Nitto Technomic 1” quill
Grips: Cult/ODI Vans Cruiser
Brake lever: Diacompe dc135
Tyres: Maxxis DTH
Rear hub: freewheel disc hub with a 6 bolt 1/8 fixed cog (18t)
Chainring: 44t Pake/Soma 1/8
Chain: kmc 1/8
Seat: WTB SheSpeed (womens “Speed”)
Tyres: Maxxis DTH 26x2.3
00:00 intro
2:52 Peugeot disassembly
7:09 parts/frame clean up
12:54 assembly
23:55 ride
33:35 outro

[@toastyrides]

Hey everyone! Thanks for checking out the video 🤙 so this adventure ended up a fun waste of time, but I’m glad I grabbed it. It’ll be going to a new home when Zane makes some space for it haha. Thanks for checking it out, there’s some build info in the description! Cheers 🤙🫶 Also there’s a bit of wind noise in the riding clips, but I have something to reduce it now for those windy as days! 🤙

[@necrodefecator]

This one holds a special place in my heart, as a french little girl I used to do my first rides with a Peugeot who had a very similar paintjob, never stop pedaling since then :D

[@toastyrides]

That’s so cool, thank you for sharing! Was it a road or mountain bike with the same colour? Sounds like a great bike to start the love of cycling with! 🤙🫶

[@madisondeans5566]

Hey Adam! another great build, I am hypnotized into a comfortable calming place when I watch your vlog! You are a great communicator & fun to boot!Alway's look forward to your work! Thanx,Doctor😊🤘✌

[@toastyrides]

Thanks heaps! Cool that you’re liking the videos 🤙 that’s great to hear, thank you! 🙌 it means a lot 👍💖

[@davidwhocares3293]

Ha, You scared me for a second with that hacksaw ! Good move, keeping the deraileur hanger ! That way you can always go back

[@toastyrides]

Hahaha I hoped I got someone with it 😂🤙 yeah I never know if I’m going to keep the bike, so just pays to keep it. Also like showing that it was once something else!

[@floppywonka]

hole in fork dropout is probably for an axle lock washer, just a washer that goes around the axle and has like a hook that sticks off and goes into the hole. never see them on qr axles but they're pretty common on solid axles

[@andrewbaxter9395]

100% 👍

[@kossmanneault683]

lawyer tabs

[@joelogjam9163]

This is the right answer. I don't know what the proper name is but I always called them hook washers. They were to prevent tooth loss if you decide to pull a wheelie with loose wheel nuts. QR forks normally had nodules on the tips of the dropouts to serve the same function.

[@Dan-ku9ln]

Torque washers

[@josephsoriano4794]

Just found your channel and I can't stop watching. Keep doing what you do dude! Keep these things alive!!

[@darcysnell6243]

26:30 pink bike lane 🤌

[@thebiggerbyte5991]

Another great-looking bike - and it seems more are in the pipeline. Excellent!

[@LuisRomero-mm7ey]

hello I live in new Lynn and my hobby is restoring bicycles, I love them. I follow all your videos and I congratulate you. the bikes are beautiful

[@bennyjmarston]

Love it! The bag "boops" into the brake cable.

[@draggonhedd]

LOVE this frame. The hole in the dropouts is for a retainer safety washer, the little washers with the pin on them that keep your wheel from slipping out. Folks always tell me that canti brakes are a pain to set up but i love em, they were on everything i had when i was a kid so i learned how to set em up properly and now i run em anywhere i don't have discs.

[@anielyantra1]

Good job! I recently rest-mod a 86 Rockhopper into a single speed. I am running 26 x 1.75 tires. Love, LOVE, Love it! I went with V brakes.

[@levibradley9170]

nice build toasty! i like the color of this one ,the gum wall tyres really go well on it and it looks shmickkk!!!!

[@johnssonnz]

Beautiful built, Zane its going to be happy.... Belíssima

[@corrado9076]

Another sweet build,Cheers!

[@oJAK3yy]

Excellent as always mate

[@toastyrides]

Thanks heaps! 🙌🫶

[@roddas26]

Bro so glad I came across your channel. Very interesting builds. Chur from Rotavegas.

[@keixoun]

had the same front canti/bag issue, i used a q-tip stem on the cable as i didn't have any spare cable housing, but it should work the same to prevent cutting into the bag with friction every time you brake

[@seanlynchcycling8044]

Just found your channel. Liked the build and your style so much I subscribed and liked the video. Keep it up dude👍👌. Jealous I dont have bikes like this😢

[@rogerbagley791]

Great build and commentary. 👍

[@rogerbagley791]

Is the exage a road bike crank.. only asking as I have one and could use similarly for a mtb build.. looks good

[@NAMUH11]

Clean looking bike, i want one now! :) . Suggestion : try straps or double to clips (plastic for comfort) with straps as they are way sturdier for stronger riders.

[@hananas2]

Yeeah the Kool Stop pads are pricy but worth it. Love them

[@donttouchthisatall]

You won yourself a new sub - and also made me want to restore a 90ties MTB as well (if proper frames werent so hard to come by :( ) Anyways, amazing content and chill vibes. You gonna go big in the community! 🚲

[@toastyrides]

Thanks heaps for subscribing! Hopefully something shows up near you, sometimes patience is key! 😅🤞 Thank you 🤙🫶

[@jp93309]

Not gonna lie, I’m jealous you have that cool retro purple Peugeot and I don’t. 😢 Oh well at least I got to enjoy the build.

[@toastyrides]

Hope you find one near you! I won’t have it for much longer, but it was fun to build up and ride around for a bit 🤩 and I’ll still get to see it around, the new owner is a mate who lives in the same city 🙌🫶

[@graceb6958]

saweet build my man

[@toastyrides]

Thanks heaps! 🙌

[@wasiegwebu3371]

its fun to ride!

[@robertfenn3672]

Hello I enjoyed your vidio. I have a nice collection of bikes. The hole in 5he front drop outs is for the safety washer which keeps the wheel from falling off if your lug nut is not tight. Since your hubs are quick release the safety washer has been eliminated. I used to work in a bicycles shop.

[@jacquescelere5693]

I have a peugeot road bike i bought when i was 14 years. Today while i am 44 it's my commuter bike. It has the same paint sheme than your mtb. These colours were very popular in France in the 90's. But these bikes were made in a very basic and heavy steal.

[@jackaimancastle2724]

This mtb very nice build...also monkeyshred ...both same look very nice😍😍😍

[@RichsRidesandRestorations]

Love Peugeots and that purple colour is so cool. 😍 Almost unsubscribed when you put that hacksaw blade to the dropout hanger though 😱 (just kidding! 😉)

[@toastyrides]

It’s so cool! Aged really nicely, even the decals look great to this day! 🤙 Hahaha that’s funny 😂👏

[@g2avityhitz]

i thirst for these vids

[@toastyrides]

Hahaha that’s hilarious And cool to hear! 😂🙌🤙

[@brianlangley3934]

I've just discovered your channel and have been inspired to do up some of my old bikes. I've been out and bought the Evapo_rust and found it doesn't work in the cold temperature of the shed at this time of year so have moved it inside. All good now. Got some Autosol too. Brilliant stuff. A little goes a long way. My question is, what brand is the grease you are using on wheel bearings and head sets?

[@nekobx2094]

Whooaaaaa!!!!😍

[@toastyrides]

Hahaha yaaaas 🙌🫶💖

[@kilopapa]

@Toasty Rides Great build, can you link the 6m chain you mentioned?

[@MrTurnerAhmad]

cool

[@bizonis4e11]

Very cool rar bike

[@jimk6862]

Great looking Puegeot.. that colour is so good. Am curious are there any current model/new bikes that grab your interest?

[@toastyrides]

Sure is! 🤩 love the colourway of this bike! I have a Kona UnitX (2020) that I love. It has a steel frame but modern standards and it just rides beautiful 🤙 I also like the Stooge Cycles range, they’re quite cool! (Stooge are more exclusive than Kona etc but not necessarily expensive as some low production bikes). Some Marin (Nicasio and Larkspur) are pretty cool, too! 🤙 there are some out there, mostly the steel ones haha 😅

[@superraptorproductions5452]

Hi, Can you hook me up, where did you get the kmc garage chain in Auckland? Cheers

[@darcysnell6243]

Sign: cYCliSts pLEasE SLoW DoWn Adam: Peugeot fixie go zoom 🚴 29:10

[@toastyrides]

They just straightened that little curve on Friday, too! 🥳 it’s still temporary asphalt, but heaps better for zoomin’ 😆🤌 yaaas

[@viviennepatterson5950]

Another great build. Shame about the sizing….. will you paint the black bike and change the finish?

[@toastyrides]

It is a shame, but at least it’ll be used and abused by Zane who’s a wonderful person 🤙🫶 yep that’s the plan! It’s already stripped and primed, just waiting for some more paint. I won’t do a video on it but I’ll post some photos on Instagram when it’s done 👍 The next build video is of a GT I’m painting anyway (which will get some criticism as the paint is pretty tidy 😂)

[@huggi3z08]

Where to order those exact tires

[@johnnymandry2354]

Have you ever tried clear brake pads? They make trials clear brake pads for cantilever brakes

[@toastyrides]

I have on Bmx, oooh I haven’t seen them for canti brakes! Do they give off the residue in the rain??

[@stevenrex7571]

Hey mate ! What year would this bike be ?

[@chaintedgrind5094]

Help out a weight wheeny. How much does it weight?

[@rarimallare675]

Holes are probably for integrated cable system

[@TyBraek]

Do you think you could post a link to the bulk garage door chain? I'm just looking for the correct chain specs.

[@toastyrides]

www.trademe.co.nz/home-living/outdoor-garden-conservatory/sheds-garages-storage/door-openers-remotes/auction-3677525880.htm

[@toastyrides]

There are a few, from memory, that are the same 1/2x1/8 pitch. 410 is one of them 👍

[@Philipp-kt5wd]

just a quick question: isnt the rear cog worn out? greetings from germany

[@toastyrides]

Well it took a new chain, so I don’t think so! I don’t think it’s changed much since I bought it new, the teeth were never square or super thick like some

[@frogmanpipes9561]

I'm new to your channel. Do you sell them when you are done? If so where would I go? If I see a build I'd like to buy.

[@2552legoboy]

when i bought my peugeot road bike and found out about the seat post after cutting it ive had a low one for 3 years now...

[@toastyrides]

Haha oh woah, yeah I think there are lots of them out there with tiny little seatposts! Some actually have a quill style post, with no clamp!

[@2552legoboy]

@@toastyrides that sounds pretty slick! Could only even find one 24mm seat post online very nice for a premium though.

[@MiguelXxx163]

Hey, how about a cargo bike next? Saw one pass by in your ride

[@toastyrides]

If you’re willing to pay for it 😂 I can’t afford a Cargo bike, damn! ☠️😆

[@MiguelXxx163]

@@toastyrides im afraid i dont have the cash either LOL! Was thinking more of a vintage mtb conversion? 20inch front wheel and crate? I think blue lug did a bike check for their boss

[@julianprt4596]

holes are used to pass a dynamo cable

[@toastyrides]

That would make more sense on a touring bike, but that’s about the only thing it could be I suppose!

[@julianprt4596]

@@toastyrides I have the same one with mudguard ;) I saw several bikes like that in my workshop with dynamo

[@dookiesaur7915]

where's wavey wheels shout out?!

[@komoonkh]

You did it right here

[@toastyrides]

Haha I did it on Instagram, too! 🤙🫶

[@dookiesaur7915]

@@toastyrides very cool bike when i saw his video i went to go build a wheelset for my own

[@dookiesaur7915]

@@toastyrides also is that gearing spinny? i went 17x42 and i find it very spinny for pavement riding

[@ashpunting]

have you ever kept any of the bikes you've built 😊

[@toastyrides]

Most of them, unless I talk about who they’re for, I keep. So yeah I have quite a few bikes 😆 Will do an update or “current fleet” video at some point, so the people who don’t have Instagram can see how they are 🤙

[@SergeDzus]

Привет, как называются шины?

[@vadimkharkov4385]

Привет. Вы думаете под краской не осталось ржавчины???

[@janhaucke5286]

The holes could be for a light cable, but it is unlikely on an old mtb

[@rcu6]

Probably for 'safety washers'. Same aim as lawyer lips, but a different implementation.

[@toastyrides]

That would be cool!

[@YouTubeOfficial.]

Peugeot

[@braddevcic8844]

These got italian bb? Chur

[@richardedwards4997]

There was cake??

[@dropthesubjectkiddodropthe5450]

First

[@toastyrides]

Haha thanks, Arphy! 🎉 congrats 🫶 What’d you eat tonight?! I had leftover pizza 🤤

[@dropthesubjectkiddodropthe5450]

Egg sandwich and a decaf coffee. I just finished watching it, nothing beats a city ride with an awesome fixie. ❤️❤️❤️

[@axmayaynerray]

spinny

[@ashpunting]

that's good to know I've just joined your Instagram 😅

[@toastyrides]

Haha thanks for following! 🤙🫶