Рет қаралды 407,367
Why your toilet tank is not filling up with water and how to fix it instruction.
In this video I will show you how to repair your toilet if it is not filling up with water.
Stay with me to the end of the video and I promise that you become a pro in this matter. Also at the end of the video I will give you a tip to make the troubleshooting a lot easier for you.
I insist you to follow my steps and please don’t skip any.
And please subscribe and hit the like button to support my channel.
Let’s see what tools you need for this job!
You need a Channel lock, you need a towel, you need a Bucket and you need a sponge or a shop vac. And I show you the required materials in a bit.
As you can see I’m planning to use a shop vac instead of a sponge since it makes the job quicker and also I don’t have any sponges around.
First thing first, you need to open a tap to make sure that you have water in the house.
Let’s open the tap in the bathroom sink.
As you can see, I have water in the sink and it confirms that the problem is only with the toilet.
Let’s go back to the toilet. I remove the lid for the toilet tank and there is no water inside.
We have water in the house but not in the toilet.
Now I am going to test the toilet to find out where exactly the problem might be.
We have 3 plumbing parts to test, a shutoff valve, a supply hose and a filler valve. I’m going to start the test at the lowest point which is the shutoff valve.
You need to have a braided hose after the shutoff valve, if you don’t, then consider watching my other video here to learn how to replace your existing toilet supply hose with a braided hose.
Turn the valve off, disconnect the braided hose from the toilet tank and place it into the bucket.
Slowly turn the valve on, to make sure you have full pressure at this point, if you don’t have pressure then the problem is with the shutoff valve or the braided hose and you need to replace them. But in this case I have full pressure down here which means the shutoff valve and braided hose are just fine, and now I’m %100 sure that the problem is with the filler valve inside the toilet tank, so for the materials I just need a new toilet filler valve which I already have a universal one here.
I use the shop vac to empty all the water inside the tank.
And now that all the water is removed, I start removing the old filler valve, removing it is very easy since there is only one nut holding it in place, loosen the nut and it should come off.
Now I start preparing the new filler valve and put the parts together, you can read the instruction that comes with it or just watch how I do it.
I installed the new filler valve and connected the supply hose back.
Let’s turn the shutoff valve on.
As you can see my toilet is just fixed.
Here is the tip, I promised you at the beginning of the video,
Based on my experience if you have a toilet that is not filling up with water, there is a %90 percent chance that you can fix the problem by replacing the filler valve, but it is always a good practice to test the other parts and make sure they are working properly.
I hope this video has been useful and if so, please don’t forget to like, share and subscribe.
if your Toilet Not filling then watch this video all the way to the end and follow my steps,when a toilet not filling up with water then there might be different causes and in this video i explain every single cause and i show you how to fix it even if your toilet not filling up with enough water you are still covered in my video and you can also use this video if your toilet not filling fast enough I meet many clients in a week who has problem with no water in toilet tank and i always advice them to see my video and learn How to replace toilet filler valve which i believe is a cure to their problem, actually toilet repair requires some knowledge and you should not expect to learn everything over night but you can at least learn how it is done, i have been dealing with toilet repair flush valves for quite sometime know and it makes it easier for me to perform the job but you should give yourself at least a couple of hours if you planning to do the job yourself when a toilet not working no water in tank it is has very simple fix and i have shown every step in this video but if you have a toilet that is not working properly then you should first find out what part has failed and then attempt the repair,toilet not working after water shut off then I assure you that the problem is the filler valve and you just need to follow my steps on how to fix toilet flush valve even if you want to learn how to fix toilet not flushing or Why there is no water in the toilet tank and How to fix no water in the toilet my video got you covered.
🔥www.thepipewrenchers.ca/
🔥 / thepipewrenchers
🔥 / thepipewrencher
🔥 / thepipewrenchers
🔥 / thepipewrenchers-toron...