Рет қаралды 3,528
www.MopedRich.com
Part 1 Tomos Clutch repair: • Tomos Moped Clutch Pad...
Glue: amzn.to/2WqcmGM
Gasket cork material: amzn.to/2W5ZrLa
Wire wheel: amzn.to/2K8tN8D
Drill: amzn.to/2M83aTF
Circlip pliers: amzn.to/2YMbfPc
Hose clamps: amzn.to/2VHaw00
Workbench: amzn.to/2YNartp
Welcome back to Moped Rich. This is part two of the Tomos clutch repair.
First, start out by removing the hose clamps from the clutches.
Then with a razor blade, trim all the extra cork hanging from the sides of the clutch shoes.
Cut the cork between the clutch shoes.
Finally using the razor blade, cut the cork at an angle like a ramp at the ends of each clutch shoe.
It’s the same process for the other clutch.
Before installing the clutches let them sit in type F transmission fluid for a few hours or overnight.
Thanks for watching and follow moped rich for more moped content. Visit mopedrich.com to see some great moped builds and restorations.