How to Clean and Grease your Philips, Gaggia, or Saeco Brew Group!

Рет қаралды 46,895

Tom's Coffee Corner

Күн бұрын

Пікірлер: 62

@99vfrpilot Ай бұрын

Thank you for this. It shows the lubrication steps much better than the official Philips video.

@TomsCoffeeCorner Ай бұрын

Thanks for your feedback!

@talhazekeriyaoglu1211 8 күн бұрын

@@TomsCoffeeCorner best guide on the youtube.

@zeleniyzmiy387 Ай бұрын

Thanks for video, Tom. I opened my coffee machine, looked at that scary hell inside and started to search some video guide how to clean up that mess :)

@vionovi2581 Ай бұрын

Thank you for the video!My coffee machine definitely needed a good clean ❤

@EduardBumbaru 2 ай бұрын

Hi Tom! I have the same machine, and i suggest to the owner to replace the o rings. My maintenance is to wash the brew group onece a week, like Philips says to their manual...and once a few months i clean it generally, look at the o rings, grease the brew group and use those tablets for removing oil resulted from coffee. And a tip, even if Philips says that you can use up to 8 Aqua Clean filters without descaling...don't do that. After 2 filters, descale it with the Philips solution when the second filter is gone, get out that "sucker"😅 and do a descale. Happy espresso drinking!🙏🏻

@TomsCoffeeCorner 2 ай бұрын

Thanks for sharing your maintenance routine! Should last a long time with that care! Cheers!

@EduardBumbaru 2 ай бұрын

@TomsCoffeeCorner yes, i hope to last longer than waranty😅 wich by the way expired few days ago, and i did a deep clean and maintenance...i saw several problems after that 2 year waranty at least with 3000 series, but we will see😁

@iaskosam 5 күн бұрын

On the filters - I stopped using them as the machine pipes got clogged with filter particles (no idea if it was a faulty filter or got over time). I filter the water and then add it to the tank. Have not had issues for a few years.

@EduardBumbaru 5 күн бұрын

@@iaskosam hmmm good to know

@ozkankusmez5799 6 күн бұрын

Teşekkürler. İlk kez bu cihaz için böyle ayrıntılı bir temizleme videosu gördüm❤

@suzelizabeth Ай бұрын

Thank you! I appreciate the video. I got a good chuckle at "grodie"-haven't heard that in decades! Go, Pack Go!

@TomsCoffeeCorner Ай бұрын

@@suzelizabeth Thanks, and Go Pack!

@reklamaFORMS 2 ай бұрын

Mam od około 20 lat Saeco Talea Giro. Ma ten sam zaparzacz. Robi kawy do dzisiaj. Bardzo go chwalę. Nawet dzisiaj, tj. 27.11.2024 r. go wymyłem i nasmarowałem. Wcale o niego nie dbam tak, jak mówią przepisy. Myję raz na 2-3 miesiące, a kaw robi dziennie 8 espresso, w niedziele i soboty macchiato 4x. Ekspres jest super !

@wlfgang Ай бұрын

After 20 years that plastic is gonna degrade pretty badle and leech toxic carcinogenic chemicals in your coffee...

@glloyd9707 2 ай бұрын

Love this cleanup routine after a "Coffee Enima" Thanks I needed that😂

@marcwinner567 2 ай бұрын

Thank you. Really good and clear instructions 🎉

@yvonnes3947 20 күн бұрын

Thank you so much for that detailed description on where to grease! Better than the Philips video or user manual! Do you also grease the O rings? I hear so much about those… but where exactly are the O rings?

@TunaVEVO 14 күн бұрын

No . oring is tha red one

@Nancy-ex6tm Ай бұрын

Een hele informatieve en duidelijke instructie! Thanks! 💪 Im good to go now , forever 🎉

@MetaMortis21 14 күн бұрын

Thank you for this video! Much appreciated. I’m just having an issue now with the little part that has the blue mark on it. My grandmother tried cleaning it and this popped out of its shot and it’s so hard to put back in. Why would Philips not make this easier to snap back in 😅

@lancedover4086 7 күн бұрын

Thank you for your video.

@gustavomarques9652 Ай бұрын

Gracias fuiste de una gran utilidad!!! Saludos!!!

@Thyldor Ай бұрын

Hi Tom, great video. I'm cleaning a brew group that hasn't been rinsed in a long while. It's grown mouldy in spots and is tacky and sticky all over. Rinsing with warm water isn't enough. I've seen there are dedicated cleaners, like Urnex Cafiza. I was curious if you knew if you can use regular dish soap? Are there any downsides to it, other than having to re-grease everything meticulously afterwards?

@123ViperR 4 күн бұрын

What brew group is easier to clean and maintain? Philips or Delonghi? Trying to decide on these two but can't see a comparison for cleaning the brew group. Also, which one does a better job at compressing the coffee and at extraction?

@ghostridar1988 2 ай бұрын

Hi Tom, just bought a 3300 lattego and it seems like when I took out the brew group,the yellow slider on opposite side of the 'push to release" tab locked it self. Now after getting some really watered down coffees, released the tab and the machine seems well. Is it normal for that tab to lock when you take our the brew group? And what is its purpose? Thanks in advance and great content 👌

@DramaticChiipmunk Ай бұрын

Hi, I have two questions, if you can answer I would be really glad😊 firstly, when I dissamble and try to clean brewing part like you, it was sticky because of the lubricant. If I try to clean it like you with a toothbrush, this sticky oil will stuck every corner of the brewing part :( how can I prevent this? is it safe to use dishwasher or anything else to prevent it? and secondly, I found worms in grewing part :( the machine was in my mom's house and she didn't use the machine for about a year.. I'm not sure the worms is just in brewing part. how can I clean it? :( thanks a lot!

@theoldmaninthecave 2 ай бұрын

Thank you Tom! Straight to the point, clear instructions 👍

@maki9396 29 күн бұрын

Thanks!

@BJ-lc7mt Ай бұрын

Thank you!

@jakal.2160 2 ай бұрын

Philips instructions are that you clean it once a week only with water and air dry it - not with paper towels or similar. Not sure why should you leave it to dry on air, is there a certain reason for that? Seems pretty solid build, can you damage anything, we just bought 5500 series and I'm kinda scared how to handle it, that I wouldn't break something 😅. What grease is that - it seems it very hard in my country to find more to buy it, not sure how long the one you get with machine will last? Also you should grease it every 2 months right?

@fsicakyuz 2 ай бұрын

Hello. The reason why it is not recommended to wipe the coffee brewing unit with any cloth or tissue is the risk of small particles and lint from them sticking to the moving parts of the machine, which could cause the mechanism to malfunction or seizure. Think of the brewing unit as a "machine" with very fine clearences. Enjoy your coffee!

@kevinburola889 2 ай бұрын

Do the Delonghi brew group need grease as well. I couldn’t see any grease on it.

@TomsCoffeeCorner 2 ай бұрын

Well, the Delonghi seems to be encapsulated. I’ve read that the bore can be greased. I’ll have to look further into it. We’ve used Delonghis at work for years, and I’m pretty sure we’ve not greased them.

@kevinburola889 2 ай бұрын

@ Thanks Tom!

@geodude2406 2 ай бұрын

can you review the kitchen aid kf8

@Skipper180 2 ай бұрын

Hi Tom a while back you made a video about outin coffee maker. They made a coffee grinder can you please try it?

@TomsCoffeeCorner 2 ай бұрын

Should be coming soon 😊

@bigbadboogie6842 15 күн бұрын

Biggest issue is gaskets that get burnt ciffe on them that wont come off. I tried white vinegar, alcohol, soap, dish soap and oil (given ciffe beans are oily) but its stuck like crazy.

@milcicm 2 ай бұрын

O ring should also be replaced when it changes colour to dark red/black like this one. The colour should be bright red

@bigpoppa1234 2 ай бұрын

might be colourblind if he's saying it's orange.

@TomsCoffeeCorner 2 ай бұрын

I noticed that the O ring inside the machine could use replacing. This is a friends’ machine, but maybe l’ll order a gasket kit and replace them. Good call. Cheers!

@utiuandy99 2 ай бұрын

Nice watch 😮‍💨

@vaultiplexc 2 ай бұрын

Video is helpful but how come that inner unit is stuck in side and i can't seem to pull it out?!

@TomsCoffeeCorner 2 ай бұрын

@@vaultiplexc You have to both squeeze the tab, and wiggle the unit outwards. It might be kind of stuck if it’s been a while. Cheers!

@vaultiplexc 2 ай бұрын

@@TomsCoffeeCorner I did not shut down properly so the front latch piece did not skew back to default position. What I did was to put everything back in position, restart the machine, and then turn it off properly. The latch now is back to the place where I can remove the inner unit for washing. Now is working!

@satoshimuny31 2 ай бұрын

By the title and thumbnail, I thought you're going to show us shaver video 🤣

@alexandru6291 Ай бұрын

Hello ! I have a problem with my machine ! I took out the brew group clean it but now it doesn't fit in anymore ! I try all possible moves but still doesn't go in ! What shall I do ? 😢

@TomsCoffeeCorner Ай бұрын

Have you made sure it's in the initial position? Just make sure the cradle is back the way it was when you pulled it out (ready to accept coffee grounds). Cheers!

@dabidabidoo Ай бұрын

3:36 - 4:04 i did this and now my brew group wont brew/grind anymore. 😕 Any help?

@TomsCoffeeCorner Ай бұрын

Please pay attention to 4:08 to get your cradle back into initial position. That should do the trick!

@miller3blade888 Ай бұрын

Anyone worried about the black plastic that's been in the news? Specifically of the brew group since it comes into contact with a lot of heat? Has Philips Saeco come out with anything about the safety of their machines?

@marcwinner567 2 ай бұрын

You mention that the third column in Latte Machchato regulates the total serving but in my test it only changes the milk ratio. Can you double check?

@rodrigomodesto3158 Ай бұрын

Hi Tom, i bought this machine 5400, but the at the first time when i used, i did three coffe, but after that the machine show me the error 3, i quite this parts, I cleaned, but now insist the error 3, I did for all, and not solve yet, can u help me? The error 3 insist at machine!