ToniSport Newsfeed: Belt Tips English

[@IntegraDIY]

Rc belt manufacturers suggest never put any oil liquid or silicone additives to rc drive belts. I usually take off the diffs and belts, clean every tooth with a clean tooth brush, and if the belt is really dirty, a lightly dampen towel with water just to clean the belt.. but it shouldn’t be enough to get the belt wet. You want to make sure the belt dries off completely. Additives will only cause more carpet fibers and outdoor dust to get stuck on the belts and weaken the belt.

[@HL-OOI]

Which is better? Hardened the front or loosen the rear by one notch on the centric from default settings..

[@22gearhead22]

what body is that you have?

[@dj1jesus375]

Very informative video, thank you! In my Tamiya XV-01 (front motor + belt for 4WD), the drive has a lot of resistance when I try to turn it by hand. Could this be a belt issue or did I rather mess up a gear or differential?

[@paulsdrc]

How much flection should the belts have, vertical play?

[@gunnarwelin2106]

Will the belt booster work for nitrocars aswell?

[@patrickbeckrc2113]

Yes for sure. It is good for all belts we use in RC cars!

[@inshapewithryan-onlinecoac4757]

Hi Patrick, when should we apply the belt booster? Is it before every run like a tyre additive or just once before going to a race meeting?

[@ToniSport-Newsfeed]

You can apply it onto the belt from time. But you don`t have to use it before every run like the tire additive. It is only used to make the belt working more efficient in combination with the pulleys!

[@bobbymalta73]

Thank you.

[@dmichel26]

Happy to see you posting again.. I’m your biggest fan..

[@patrickbeckrc2113]

Thank you very much. We will continue with our video series and will do even more in the future!

[@dmichel26]

@@patrickbeckrc2113 any possibility of doing a nitro on road series?

[@gunnarwelin2106]

Yes nitro onroad NT please👍👍👍

[@patrickbeckrc2113]

@@dmichel26 For me this is not possible as i have ZERO nitro knowledge :-)

[@patrickbeckrc2113]

@@gunnarwelin2106 for me not possible because of ZERO nitro knowledge :-)