#284

[@kg2ix]

So nice to see you and your dad having fun. I miss my dad and the times like these we had together. Cherish every moment with him. Best of health and happiness to you and your family, Keith Kg2ix

[@TonyAlbus]

Thank you Keith, sorry for your loss, yes we will, we had a great time!. same to you and yours too..

[@13HN870]

Nice to see Father and Son the Hexbeam is a very good DX antenna. Today is Father`s day in Germany enjoy the time with your family. 73s

[@TonyAlbus]

Thank you, yes it was a great day, we had good fun.. happy fathersday to you and family.

[@alpcns]

Perfect day indeed. Nice, together with your dad. Thanks for sharing and good luck with the antenna!

[@TonyAlbus]

Good times! .. Thank you!

[@LawpickingLocksmith]

Lucky you! Just blows me away how quickly you got it up again. Let alone the size is just magic!

[@TonyAlbus]

Thank you.. is was an at least 12 hours job in one day, while is was also well planned ahead... but we love the result, it all worked out.

[@ryank5tar]

Outstanding work!!! Doctor surgeon Dad did a great job!

[@TonyAlbus]

Thank you Sir, i will pass on the message to the boss, 73

[@robj1646]

Such a nice video!! I love how the two of you have fun. I talk to F4VUP regularly on the bands, but to see you both is also special! 73 de HA7RJA - Rob

[@TonyAlbus]

Thank you Rob! Yes we had a great time. When i was a little boy i always watched my dad playing radio and work with electronics. Later had my CB stuff and later my Full. In that time you found me on the roof many times for myself or assisting my dad. in between that time and this video was about 25-30 years becouse we both parked the hobby . but we still work great together. it was a good time together. 73

[@M0UOO]

Hi both of you, Well I have had one of Ant Hex beams with 40m add on and the exstream weather kit for about 3 years. My hex beam is on top of my other antenna on the tower and is about 27m from the ground. The antenna works really well and I use it manly for the higher band but it is very quite on recieve which is important for me as my station is at my works QTH in the middle of an industrial estate. The problem I suffer with is birds sitting on the antenna's. Next week I have 30m cherry picker to repair the 20m element which has broken due weight of the birds. I will also do some maintenance on all the antenna unfortunately I can not tilt the tower enough to work on all sides. Love your tilt system. The 40m element works very well and is about 4-5 S points down on my main 40m antenna but has a much wide focus and allows me to pull station out which I am not pointing at. My works QTH is very near to the sea well 100m to the river and 2km from the english channel and Ants weather kit has been fantastic winds last week were 88khm on the weather station and the hex beam just flexs. You will have great fun and I hope to work you soon 73 Richard M0UOO

[@TonyAlbus]

Thank you for your setup, very nice, good to know it holdsup very well close to the sea. 73. F4VUP and PE1ONS

[@Michel52663]

Chapeau mijne heren voor een job well done 👍. Het resultaat mag er zijn.

[@TonyAlbus]

Bedankt! .. was een goede en erg leuke dag, zeker als het dan allemaal ook werkt!

[@danishnative9555]

Very nice antenna array your dad has. There are a few of those around here, but they have a tendency to go faulty from icing and wind in winter. Great for more moderate climate in France. 73' and enjoy you vacation? Tony.

[@TonyAlbus]

Thank you, yes very nice for moderate climate....73'

[@TonyYarusso]

Just transmit with higher power and the ice will go away, right? :P

[@davidv1289]

Very nice video, Tony. I can see where you get your penchant for precision in your work. Good to see the foreman (forewoman?) show up near the end to keep you boys in line!

[@TonyAlbus]

Thank you David, yes when the boys play, someone needs to keep an eye :)

[@Stephen_Heathcote]

Excellent video Tony. Nice to take time out with and help family! Great weather too :) I misread the title and thought you were adding a 40m (Height) option! Was wondering how you were going to support that... Not a HAM operator myself, but have a few rigs and do listen to you lot :) Currently have a spider mast in the loft. 73's to you both. Excellent camera work by the way! :)

[@TonyAlbus]

Thank you Stephen... i thought the same and have no idea what to do with all the pipes i brought :)) .. coming from you, that the camera work is good, means a lot to me, as you helped me a lot in the start... Thanks!..

[@Frank_K4FMH]

Just watched this one…great times! 73 de K4FMH

[@TonyAlbus]

Thank you Frank, yes nice to do those things together. 73

[@CodfishCatfish]

Great video, nice and straight forward with minimal talking and much more demonstrating. Thank you so much. Two questions? The extra beam looked like it was dual band perhaps 6m and 4m? Elements too small for another band. The extra tilt over part at the top, can that be locked or does it require another winch and cable? De Spence M0STO

[@TonyAlbus]

Thank you!, i am not sure about the beam, i think it was just 6m. the tilt plate can be locked, but because of the weight of all of it above we had a small portable manual winch to help it tilt.

[@GeorgeChristofi]

Thats a pretty impressive hexbeam Tony. I do like the hinged joint above the rotator, might have to look into something like that for here!

[@TonyAlbus]

Thanks George!...

[@emastyle]

Hello, from the video, the telescopic mast seems very very solid and well built. Do you have by chance any pictures, and/or some advice ato share, as I'd like to build one similar ?

[@TonyAlbus]

Hi, this is made by a local welder, he does not provide the drawings.

[@cesargalvan3750]

Excellent setup

[@TonyAlbus]

Thank you!

[@PA0JAX2747]

Dat heb je mooi gedaan Tony ,en voor je vader ,veel pezier met de uitbreiding van de Hexbeam Goetjes jaap PF9B

[@TonyAlbus]

Dankje, het was erg leuk om te doen...

[@Graphi59]

Hello and thank you for this video. I did the same transformation with also the 30 meter. The 40m is a dipole shortened in X, I built everything, extension support in tracer. To put a 6m below do you have a minimum space under the hexabeam? THANKS. I found you for my next project "Siglent SSA3021X PLUS" 73's Thank you for your videos to you 2 and the family. F6EII

[@TonyAlbus]

Thank you Ralf! the 6mtrs is gone, we had a problem with strong weather.. also last winter sadly due to too much ice on the wires, my dads hex beam broke, he is now looking for a stronger model better resistant to the EU winter weather and strong winds. Interesting your 30 meters modification, nice! 73, Tony PE1ONS

[@andrewgeorgelang]

Hi Tony. Wow that antenna is pretty wicked man. I keep wanting to get into 40 Meters, but I just love my 10 meter setup. Would 40 meter be good for talking skip from Canada to Europe?. Also I love the pool greenhouse. I actually never seen one before, until watching this video. Now I want one for my pool. Does it work well? Thanks for sharing 😀

[@TonyAlbus]

Hi Andrew! not sure 40 mtrs is good for such long distance, maybe my dad knows, he is a real Ham.. but they do a round every day around europe, and that works fine. The pool greenhouse is an Abri, is works very well if you have a lot of tries and leaves around the pool and it keeps the water more stable in winter. and you can slide it open to the back if you want it open in summer

[@sbelectronicaindustrial6652]

Hello Tony, what a good antenna... It is for some type of Transmitter.

[@TonyAlbus]

Yes is is a 6 band HF antenna. 7~30 MHz, the antenna below that is for 50 MHz

[@webmid]

Hé Gerard en Tony! Wat leuk dat ik zomaar jullie film binnenloop. Lekker klusje om 40m in de spider erbij op te nemen en meteen maar 50mHz erbij. Dit is dan ool uitstekend antenneweer dus goede keuze. Ik wens jullie succes, tel je vingers achteraf en doe de groetjes daar, ook van Trudy (PE1NIKS) :-)

[@TonyAlbus]

Hallo Jan, leuk dat je even langs komt... je was een hele warme dag, maar was heel leuk weer eens samen wat te bouwen. groetjes!

[@Ambush853]

Kt4WG - Nice, awesome.👍

[@TonyAlbus]

Thanks! 73

[@mewrongwayKOCXF]

What a awesome setuo! I want one.

[@TonyAlbus]

Thank you! .. greatings.

[@MarioRiesebeek]

Nice antenna's wish you good DX 73 PA5MR

[@TonyAlbus]

Thank you Mario!..

[@kclin0968]

I like the mechanism of your tower.

[@TonyAlbus]

Thank you!

[@kclin0968]

@@TonyAlbus 73 K6KWV

[@artem_ur3q]

Cool setup!!

[@TonyAlbus]

Thank you!

[@luis.s.martin]

Great job. ThanX for sharing. 73

[@TonyAlbus]

Thanks!

[@PE1GVK]

Hoi Tony, Leuke video en groeten aan je vader! 73's Arjan (PE1GVK )

[@TonyAlbus]

Dank je!.. ga ik doen 73'

[@PE1GVK]

@@TonyAlbus Ik heb hem meerdere malen gewerkt op het 40 meter NL netje.

[@mikevhx5682]

Beeeeautifull. Dus de 40m krijgt een extra coaxkabel?

[@TonyAlbus]

Hi Mike, ja dat is correct.

[@mikevhx5682]

@@TonyAlbus en tevreden? Heb vandaag ook een quote gevraagd..

[@TonyAlbus]

@@mikevhx5682 Deze is helaas met ijs en sneeuw stuk gegaan door het gewicht van het ijs. Mijn vader heeft nu een sterkere variant gevonden uit de UK. maar delevertijd is heel lang

[@MarcelHuguenin]

Hey Tony! Da’s andere koek zeg! Dit is bij je pa denk ik zo? Wel een heel grote omgekeerde paraplu. Voor het serieuze werk en zo te zien heb je het allemaal niet van een vreemde 😉. Veel plezier samen ermee. 👍🏻

[@TonyAlbus]

Hi Marcel, ja klopt, is bij pa.. ik heb de ruimte ook niet.. wel heel gaaf om te doen. en dat het allemaal werkt ook :))

[@MarcelHuguenin]

@@TonyAlbus Is hij nóg meer zendamateur dan jij?

[@TonyAlbus]

@@MarcelHuguenin Hij gebruikt het echt....:)

[@delfinok-delfo]

Good evening, nice retractable pole, is it sold online?

[@TonyAlbus]

Hi, it was build localy, i think it is a known design, i do not have drawing. checkout your local iron worker, i am sure a few know about it.

[@grunt_mahoney6027]

Nice job boys

[@TonyAlbus]

Thanks! .. was a lot of fun too.

[@joelcoplowitz4627]

Thanks for the video. I am interested in your tower. Can you tell me where it is available?

[@TonyAlbus]

I'll ask my dad, its his.. but o think it was home build by a Dutch builder.

[@mrbambix]

wow wat zijn het ook contrapties heh die hexbeam, werkte het nog een beetje op de 40m band Tony?

[@TonyAlbus]

Hallo Leo, hij staat nu nog op de laagste stand, maar hij komt prima mee met de Hi Endfed, minder storing ook. dus als hij omhoog gaat straks, verwacht ik dat hij nog beter is.

[@rkwmazowsze2620]

I live in a block of flats 13 meters high and I want to hang the antenna 3 meters above the flat roof. What will be the effective height of the antenna - 16 meters or 3 meters??

[@TonyAlbus]

Having a clear view is the best i think. if 3 meters is enough to go over the other buildings around, it should be good to.. if you flat builing is serrounded by other big buildings, maybe 16 is better for a clear view. 3 will be stronger constructions, so depends also on your weather what is the best to do.

[@driverfilmsshortwavechannel]

Just in time for Sporadic Es on 6 meters!

[@TonyAlbus]

:)))

[@rtoledo2]

Great video , I will ck your dad's web site to see if you have more info on the base , the telescopic tower and the 90 degree bending arm at the base of the hex . brilliant set up . kn6jvs 73's

[@TonyAlbus]

Thank you!

[@manuelcv9475]

Good job yes sir

[@TonyAlbus]

Thank you Manuel!

[@marNL1970]

Nice to see you together with my uncle :-) Forwarded to PA3AFC. All thebest for everyone. Cheers!

[@TonyAlbus]

Thanks Marco, all the best to you and the family too! Cheers!

[@zdzisiek1979]

WOW :)

[@TonyAlbus]

Yes was a great day!.

[@W5MHG]

I have a hex. I am looking for a crank up tower. Where did get the one in the video?

[@TonyAlbus]

Hi Mark, the tower was home made by a Dutch guy, i try to find a link for you.

[@jwnagy]

Are you seeing any interaction between the hex and the yagi?

[@TonyAlbus]

My dad has only used it very shortly, as a storm broke some of the antennas , he did not put back the Yagi, it was broken to much.

[@cqcqdx]

Sorry, where did you buy the kit to protect the hexbeam from strong winds? Grazie, Marco

[@TonyAlbus]

Hi Marco, if i remember correct, the first beam was from Poland, but it broke so now he has one from GB .. this one now also broke... its very windy there in FR

[@cqcqdx]

@@TonyAlbus Thanks Tony, but if you remember I wanted to know where you purchased the high wind kit...73, IU0QVA

[@TonyAlbus]

@@cqcqdx G3txq-hexbean com

[@cristianmanuelgomezzuno9135]

Hello, where can I get that antenna?

[@TonyAlbus]

If i remember correct sellers in UK and Poland, one seems stronger build than the other, i forgot who is which. if you life outside EU, you prob be better off to just google Hex Beam for a local dealer.

[@davidpbowen]

What kind of tower is that?

[@TonyAlbus]

Hi, its homemade, but not by us. my dad bought on the Dutch ebay from a metal worker

[@MorrisonOscar-u6l]

Taylor Michelle Williams Jose Jackson Anna

[@TonyAlbus]

Thank you!

[@comprotudo]

73. ct1bxt

[@TonyAlbus]

gracias Rodrigo! 73'

[@comprotudo]

@@TonyAlbus obrigado Tony....

[@antennebuis]

Zeergoede antenne succes 73, de ON3MK Mor

[@TonyAlbus]

Dank je, ja mijn vader is er erg blij mee, zeker na de uitbreiding.