Easihold Resin Binder

[@dennisbennett7064]

Is the resin binder sprayed on neat or is is diluted in order to make it thin enough to spray.

[@dustytaylor6294]

What of I get the spray on my pavers? Will this be ok? Or will they turn colors.

[@Chanesmyname]

I saw an Amazon review where it looked like the guy had sprayed everything with the solution, he seemed happy about it and he took a photograph and it was gravel between Indian stone slab. But in this video the stone is masked off it appears and looks like it was pointless when there seems to be marks all on the finished result and the masking is removed? Looks like natural stone slabs to me in the video

[@TonyMcCormack]

There could be some darkening of the colours, but it depends on what form of paver, and how much of he resin is applied.

[@castareablast]

How is it for blocking weeds

[@jackmorley6257]

Can you lay on top of hard standing ground e.g concrete/ tarmac etc.

[@TonyMcCormack]

Yes, but this isn't a traditional resin bound system: it will give you a foot-traffic capable surface over an existing bound (concrete or bitmac) surface, but it won't make it suitable for vehicles.

[@jackmorley6257]

@@TonyMcCormack thanks, so good for over laying existing concrete footpaths/patios?

[@Exmilkman]

I have just taken our old decking up today as it was slippy. Is this slippy when it gets wet? Seriously thinking of using this, it looks great.

[@TonyMcCormack]

No - it has excellent sliup resistance

[@Exmilkman]

@@TonyMcCormack Excellent thanks I have ordered some today.

[@kerriandreasonm8929]

How many coats should you put on. We did one so far and it's held up pretty good but we are trying to make it more solid to put patio furniture on it without sinking too much.

[@TonyMcCormack]

In theory, it's a 'single application' product, intended to work as 'one coat' but I can'y see any issue with applying a second coat.

[@nrvdbestratingsvoegers]

Is this also possible for different types of sand. Or use it for sand between stones to prevent weed.

[@castleman7300fx]

Great vid. Was wondering if this could be used on a breedon gravel path ? Hate breedon gravel as it walks everywhere 🥴

[@TonyMcCormack]

Sorry I didn't see your comment sooner! Yes, it's a possible replacement as long as there is only light foot traffic. Breedon Golden Bravel is often used for driveways and courtyards, where EasiHold might not be best suited, but Vuba make alternative products that would be fine in such applications.

[@jackmorley6257]

Would a easihold mix be good for a patio/path?

[@TonyMcCormack]

It's target market is low-use paths and occasional patios. Vuba have alternative resins for your more 'regular use' patios.

[@jackmorley6257]

How far does a 25kg bag of stone go if over laying (mixed with easihold) thanks

[@TonyMcCormack]

That depends on the aggregate type and depth - your agg supplier should be able to tell you coverage at various thicknesses/depths.

[@lukederrick1247]

Can you do it with any type of gravel

[@TonyMcCormack]

It needs to be a "clean" gravel, so no fines, dust or other contaminants. Best results are achieved when gravels specifically for resin bound surfacing are used, rather than any old gravel you happen to have. There is, thankfully, a HUGE range of choice from various suppliers so it shouldn't be hard to find one that you like.

[@larryduncan9488]

What would you suggest to seal sand between pavers.

[@TonyMcCormack]

In theory, you could use the Easihold, but it very much depends on the type of "pavers".

[@moviemanmills]

will this also act as a weed Block?

[@TonyMcCormack]

It will deter most weeds growing from *through* but, like all paving and surfacing, it can do nothing about weeds growing *into* the surface (from seeds, in particular)

[@moviemanmills]

@@TonyMcCormack Thank You, just ordered from Amazon and Thanks again

[@danielgreen4213]

I'm guessing this system would not be best for areas that receive medium to heavy foot traffic?

[@TonyMcCormack]

Yep - best for light to medium "family" foot traffic

[@danielgreen4213]

@@TonyMcCormack thanks you very much for the reply

[@terrymanthorpe1454]

Can I do this and drive on

[@avilla7934]

Absolutely not

[@davidmaughan4786]

How deep can the pea gravel be

[@TonyMcCormack]

That is a bloody good question, and one I'll have to check with the manufacturer, Vuba, but I'd say 50mm would be possible, as it relies on the resin binder 'dribbling' down through the gravel. I'll check with them (they won't be in now until Monday) and get back to you......

[@TonyMcCormack]

I managed to have a word with the company and their technical guy has told me...."Because it’s an air drying binder, it is somewhat limited. We'd say the maximum depth of application is around 20mm. Between 15mm and 20mm being the optimal." I trust that helps you. If you need something to bind deeper gravel, you should contact Vuba directly - they're very helpful and may well be able to point you in the right direction.

[@davidmaughan4786]

@@TonyMcCormack Evening Tony thank you very much for your help, really appreciate it might think about resin finish.

[@abifaliya3107]

Berapa harga per galon nya mister