Tool Sweeps - Understanding the Shape of a Gouge

  Рет қаралды 14,196

Mary May

Mary May

Күн бұрын

Пікірлер: 15
@joncarroll2963
@joncarroll2963 5 жыл бұрын
So after watching this I went to the shop and played a bit with a few gouges. Ķnowing that a #9 is a half circle it got me thinking, it's just how many stabs with a gouge does it take to complete a circle will give you what "pie wedge" it corresponds to. To clarify I found that both my #7 gouges are in the 1/5 of a circle. My #5's are 1/8. Also found that (and I'm going from memory so I may be a millimeter or two off) the circle made with the 5/12 was damn near exact to the 7/18. Very interesting Mary - thanks for sharing!
@luemoonba
@luemoonba 5 жыл бұрын
Thank you. Helps a lot.
@rendelawenzel239
@rendelawenzel239 5 жыл бұрын
Great explanation!!!
@gahassanflyeh3963
@gahassanflyeh3963 5 жыл бұрын
Thank you
@JeepTherapy
@JeepTherapy 5 жыл бұрын
It’s only geometry? And no I didn’t pay close enough attention in school. So... thank you for sharing.
@andrewyork3869
@andrewyork3869 4 жыл бұрын
Missing gouge? HA! A new black smithing project! Have not carved wood with anything other that a pocket knife, but I think this could be a fun build your tools craft your art type projects.
@thomasarussellsr
@thomasarussellsr 5 жыл бұрын
It's all in the math. Just gotta figure out the numbers to decode the radii patterns.
@backwoodstrails
@backwoodstrails 5 жыл бұрын
But.... 5 out of 4 people have difficulty with math!
@thomasarussellsr
@thomasarussellsr 5 жыл бұрын
@@backwoodstrails excellent comment. My question as a math teacher is... Is that difficulty with the math itself, or a mental block because this society has built the myth that math is difficult? Just about everything in life was difficult at some point. Almost everyone who puts in the work to practice math gets it and can do better than 9 out of 10 of their peers. It is typically a work ethic issue. Yes, math does come easier to some than to others, but until you get into Calculus 2 and higher the average brain can "get it" through practice. Even the higher levels are attainable if you practice. Understanding it is the difficult part. It's all about following steps, just like baking a cake from a box.
@JeepTherapy
@JeepTherapy 5 жыл бұрын
5 out of 4? 125% hmmmm me thinks you math eeees uh bitt auf
@androidkenobi
@androidkenobi 2 жыл бұрын
Did u go to Germany? or did Covid happen first? Looking forward to the mathematical insight
@Sk.Shuvo7744
@Sk.Shuvo7744 2 жыл бұрын
How to lend it
@ericblanchard9775
@ericblanchard9775 5 жыл бұрын
Think you might mean length of circumference when you say radius-
@Sk.Shuvo7744
@Sk.Shuvo7744 2 жыл бұрын
Hey
@barryfigel9957
@barryfigel9957 5 жыл бұрын
Thank you
All About Gouges
23:12
Mary May
Рет қаралды 100 М.
Carving an Acanthus Earring - Complete Lesson
39:44
Mary May
Рет қаралды 13 М.
Ozoda - Lada ( Official Music Video 2024 )
06:07
Ozoda
Рет қаралды 23 МЛН
Synyptas 4 | Жігіттер сынып қалды| 3 Bolim
19:27
Gouge Basics, Part I : Types & Sizes
9:17
Danielle Rose Byrd
Рет қаралды 2,9 М.
Everything You Need to Know to Get Started Using V-Tools
18:11
dywoodcarving
Рет қаралды 15 М.
Choosing the Right Carving Tools Without Wasting Money!
6:48
Carving is Fun
Рет қаралды 11 М.
How to Sharpen a Gouge Carving Chisel Hand Tool Woodworking Skill
11:52
Wood By Wright ASMR
Рет қаралды 82 М.
Our favourite gouges for wood carving
11:48
Dai 'lovespoons' Thomas
Рет қаралды 3,2 М.
Sharpening a Curved Gouge - Beginner Lesson #2
28:05
Mary May
Рет қаралды 172 М.
Sharpen your V Tool  - An Introduction
9:48
Woodcarving Workshops
Рет қаралды 180 М.
ALL of My Carving Tools
11:47
Shop Talk With Tim
Рет қаралды 3,5 М.
Carving a Reed & Laurel Leaf Foot - Complete Lesson
18:32
Mary May
Рет қаралды 24 М.
Sharpening a Spoon-bent Gouge - Beginner Lesson #4
8:17
Mary May
Рет қаралды 21 М.
Ozoda - Lada ( Official Music Video 2024 )
06:07
Ozoda
Рет қаралды 23 МЛН