Tool Tuesday EP21 - MuchMore Racing LED Slim Pit Lamp

[@garszy]

Love it. Great to get in to those shadowy areas where direct overhead light is not so helpful. The 3S was excellent. I'm starting to get jealous Rich, you get to play with all the fun toys! 😈 Again great tips and advice. Just when you think you are working as smart as you can something like this adds to the quality of the work that you are able to do.

[@TheRCNetwork]

+Garszy Yep, I was just in one the other night.....and this light did it's job!

[@TheLazyGreek]

I have the same one, bought a 2nd one for my fiance to use as well. Does provide the much needed extra light in the pit area. I just use my iCharger power supply for both pit lamps and my charger.

[@TheRCNetwork]

+George Doukas Nice! I knew there was a PS option......not much info on MMR's site on it though

[@InTheDogHouse3DPrinting]

That is nice! I like the adapter you did for the Deans plugs, and it looks like it would be easy to make pretty much any type adapter for any type battery on it. Hopefully they will make a set of ends you can get to use if you have different types of batteries. I have an AC/DC battery charger, and it has the 1/4" plugs on it, and this would work great with it. Thanks for another great video.

[@TheRCNetwork]

Thanks for the great comments and for watching!

[@zachegan27]

Cool!! Love the plug idea and how clean it looks

[@TheRCNetwork]

+Zach Egan Yep! Its a great option

[@2cwik4u104]

sweet light. really like how you can plug it into a battery.

[@TheRCNetwork]

+2cwik4u104 Yep, very sleek

[@dgoodman21]

How much is this lamp? Thanks for the video and review.

[@DutchRC]

It does indeed look sleek But yeah.. the parts-bin being magnetic would Really have been a handy addition :)

[@TheRCNetwork]

+DutchRC ADVENTURES Yeah, Magnetized would been nothing but icing! lol

[@robbieracer3294]

You should check out the Turnigy one. Aluminum construction, runs on a 1s lipo and only costs 26 bucks. No better light on the market for price vs. quality and features. Its really nice.

[@TheRCNetwork]

+Chester Copperpot I will CC. I'm not a huge fan of HK, as I have been burned by their batteries and currency conversion several times

[@quest1221]

i was looking did not see a price would love one of these i have two 3s that im not using lol

[@TheRCNetwork]

+Jose It's right around $65. I got mine from Tower Hobbies, but it looks like they removed it for some reason recently.

[@bbbN3r]

Hey RC Network (Richard), So after viewing your video i went ahead and bought one of these pit lamps. However, I was wondering if you have found the best way in getting this Led light to give the brightest light possible without having to worry about frying the pit light? I've tried it with my 2s lipo , but the lighting is terrible. In your video you demonstrated the light on a 3s lipo and it was a huge difference, but you mentioned that you weren't sure if this light had a lipo cut off. I'm lost in how I should power my pit light without burning it out. So if you have any information or suggestions that may help I would really appreciate it. Thanks in Advance Keep up the good work!

[@TheRCNetwork]

+Brian Ruiz Someone had mentioned in the comments (check back) that they powered it off their power supply for their charger.....could be an option

[@Mrtojo]

Did see a price on the link you had! But the others cost 64 USD. That is a lot I think!

[@TheRCNetwork]

+TOJO RC Aluminum, LED, Slim, the price is in line......Tower took their link down for some reason

[@normaluciaocampoosorio9181]

Donde puedo conseguir una lampara igual a esta

[@TheRCNetwork]

This one is no longer available, but this one is: bit.ly/2Wwp6xQ

[@quest1221]

Thanks rich keep up the good work.

[@TheRCNetwork]

+Jose Thanks Joe!

[@jammindesigns7135]

That's a good addition!

[@TheRCNetwork]

+JAMMIN RC Thanks JRC!

[@jammindesigns7135]

Hey quick question...since most kits are coming out in metric, I was considering picking up a set of MIP standards do you think it's needed for long term uses and I mostly race.

[@TheRCNetwork]

+JAMMIN RC Yeah, Standards are rarely used anymore, but some places I still use them. Examples: Pro-Line Flotek bodies use 1/16th sized bolts for the number plates, B44.3 still uses SAE, SCTE and a few others. Also Vanquish uses SAE for the bolts on the wheels. Not a bad investment though

[@jammindesigns7135]

Yea I tend you use my 1/16 every now and the and some cases even a 3/32

[@RcNickster709]

very cool

[@TheRCNetwork]

+RcNickster Thanks Nick!

[@SHAYEN-cd5qw]

Nice !

[@TheRCNetwork]

+Shayen RC Enthusiast. Thanks Shayen

[@Evolution8R]

I want one!!!!

[@Al-ud8qi]

I would rather plug it into an outlet, I'll keep looking.

[@TheRCNetwork]

+Harvey Mushman I have the Team Orion Version up next...stay tuned!

[@Al-ud8qi]

Awesome, look forward to that review.

[@toysoldier46552]

Only draw back that I see with this lamp is that nitro guys like me would have to figure out a way to power it up, nice otherwise.

[@TheRCNetwork]

+Anthony Eaglebarger (toysoldier46552) Very true.....