Super Glue and Baking soda! Pour Glue on Baking soda and Amaze With Results

[@pauloakes6952]

Bro seemed pretty handy with the powder and a credit card

[@SmDJeremy]

🤣 This hahahah

[@pflagler733]

Ya, wasn't his first rodeo...

[@nwpia]

🤣🤣🤣🤣

[@TheMrTslab]

Gotta wonder where he got all these crazy applications for his SuperBakingSodaGlue? "Clothes Pins! I'll make clothes pins!"

[@PaulKeepsItReal]

Thank you. That motion was too smooth to be his first time cutting white powder with a credit card.

[@CaptainOblivion]

Holy cow, it's been a long time since I saw a lifehack video with actual lifehacks in it

[@w2385-i2s]

Poor man's 3D printer.

[@DavideDavini]

I thought the exact same. 😂

[@babyeater101010]

I’m glad I didn’t have to scroll too far to find a comment like this

[@thisaintart]

@@babyeater101010just deleted my exact comment 😂

[@amelliamendel2227]

I'd legitimately like to see a strength test versus PLA

[@tpohne1965]

Beat us to it…

[@sirifail4499]

I’ve been doing this for a while. Be aware. It gets VERY hot as it cures.I was kind of holding the edge of something I was making with my finger and burned myself pretty badly!

[@mushu8460]

Should be a highlighted comment

[@maine9319]

Thanks for the warning, appreciate that

[@solarnaut]

Thanks for saying so . . . apparently the loud music is to cover the screams ! B-)

[@TheTruthKiwi]

That would've been quite a good thing to mention in the video. Appreciate the heads up. :)

[@mikefrombefore2956]

I saw the "steam" as the glue was dripped in. I was going to post to ask if this was an exothermic reaction, and if so, does it produce heat. The reaction looks similar to a compound we use and it gets quite hot when it kicks.

[@keepitclean8791]

Can I just say first of all WOW, thank you so much for these tutorial videos. I am on my way to building my first house using baking soda and super glue. So much more cheaper than bricks!!

[@elyasaryan6685]

🤣😂🤣

[@k.hendrickson8735]

😝 LOL

[@MarioRuscovici]

Can you get out the front door? Maybe you need to call Super Man and his side kick, Baking Up A Storm

[@PastorPhil-mu7iu]

You should see what I've done with an old truck using these tricks! Right now I'm designing a new tank to send to Ukraine

[@burtonbruning8581]

My question is can we now change the story of the 3 little pigs to be four pigs with one of them using baking soda and super glue. Will this revolutionize jail shiv making ? can you make your own bullets. Can I make a cast for broken bones. The options are endless. And of course I think a Noble price in Chemistry should also be forthcoming. LOL. I have to calculate the cost of building a new travel trailer! I wish I had more time to build all I want to build. I just don't think I can keep up with the speed on the video, I will be hospitalized for exhaustion . Insomnia kills.

[@CharlieGoy]

What I found most practical for me is reinforcing repair of plastics like in the case of the broken knob. The stripped screw trick was pretty good, too. Thanks!

[@CharlieGoy]

@William schaft Just watched another vid on this channel using graphite (pencil lead) mixed with baking soda making an even stronger bond. Look for that one! Peace, brother.

[@bfowler1000]

Is it actually “super glue” brand or some more economical way of purchasing the product?

[@CharlieGoy]

@Emmics tv What's that got to do with any of this, dude?

[@CharlieGoy]

@@bfowler1000 Good question! Let me know if you find an alternative that works as well as super glue.

[@frankielaplante8809]

To deter plate theives put fingernail polish(I prefer clear)on the screws before you twist them in.

[@That_Dingus]

This is brilliant. The amount of times I've wanted to fix something small and made out of plastic and super glue alone didn't cut it.

[@joekellyou]

That dude made lines with a card like a PRO!!!! 😂😂😂

[@robertpreisser3547]

Comes from sniffing all of that glue first… darn gateway drugs… :)

[@UhtredOfBamburgh]

The only disappointing part was when he didn't try to turn a nut with the glue-wrench

[@paullangton-rogers2390]

I guess that wrench would only work once or twice before it breaks..if it worked at all, depending on how tight the nut is.. but it proves you can make a specially shaped tool or a replacement part inexpensively very quickly if you needed one!

[@UhtredOfBamburgh]

@@paullangton-rogers2390 It doesn't prove it unless its tested! For science!!

[@joemamaluc312]

@@UhtredOfBamburgh Except with COVID vaccines.

[@Mitch-gu3dz]

He did try but it broke, that's why it didn't make the video.

[@JS-rv3et]

@@Mitch-gu3dz again depends how tight the bolt is. also to get a better tool use a better mold the playdough probably made the tool have structural integrity problems. also if the power and glue were mixed better and more compact.

[@satan6548]

Does it work on a broken heart?

[@yoghurt6152]

Don't try it bro. Today I was supposed to be a heart donor, but when they saw that I glued it together with baking soda and glue, they kicked me out.

[@mr.mindshackR]

😣😣😣

[@sameermalik5322]

For that you require a happy mindset and confident personality!

[@sameermalik5322]

@@yoghurt6152😂😂😂

[@stormry6]

Maybe.

[@DIYDumpRat]

That rounded out screw head fix was brilliant! Ill definitely be using that 😁

[@DiegoSynth]

Yes, exactly my thoughts!!

[@brandonbrown6918]

Got some cycling shoes I'll be doing that too soon😅

[@ireallyreallyhategoogle]

Would have needed that a couple of years ago.

[@adisadis6313]

Don't forget

[@johnburns1902]

That was a good one.

[@lookworm_]

The stripped screw is heaven-sent! And boy was he a pro at chopping that banking soda up! Took a side note on that too ;)

[@StillAProudAmerican-ll2yc]

lookworm_, are you sure that was Baking Soda or did they accidentally record the "before the party starts" video. Lol.

[@ThePurple1-m2o]

🤣🤣🤣🤣🤣

[@joedirt3563]

I could have used that screw trick many times.

[@CRCfail]

Are you implying you do cocaine? Like it's cool?

[@lookworm_]

@@CRCfail something being cool is perspective

[@kh23797]

Cyanoacrylate ('super glue' aka 'crazy glue') combines with sodium bicarbonate ('bicarb', baking soda) to emit toxic fumes. Use this method only in well ventilated areas, preferably outdoors. Handy, though-I fixed my washing machine switch this way, and it lasted years. Modellers use it to repair toy buildings and vehicles before shaping and painting, as can be seen elsewhere on KZbin.

[@distantsight]

@The Mexican Dude Yes VERY dangerous fumes!

[@johnslugger]

Cyanoacrylate fumes can cause blindness.

[@kevincorkery7280]

I cannot see......watchout for me......m

[@MichaelSTaylor]

These fumes unfortunately also cause the user to lose their power to speak, but compensate by allowing hyper accelerated movement.

[@clintoruss153]

@@themexicandude269 whoopsie

[@Dudleymiddleton]

Like a foundry equivalent to 3D printing! Pretty impressive.

[@LeoNegrete84]

At pennies on the dollar....lmfao....

[@lacasalingadimoabit2317]

Well, they are called particle reinforced composites. They are around for a while and the reason 3D printer hasn't substitute them yet is because they are much cheaper and reasonably versatile. Depite being quite handy, this guy just discovered hot water (and he possibly has some form of intoxication/chemical burns due to the fumes and heat released in the process)

[@ymusicymusic6344]

Just what I was thinking

[@jesk-woo9005]

Totally my thought!

[@lunarvision]

Yes, Dudley.

[@samlind8330]

This really does work. I fixed the back plastic of a 96 Ford F250 door panel that was breaking apart right where the window trim blade snaps on. That was several years ago and it's still working.

[@NancyHafler]

Thanks for sharing this! My dashboard (04 silverado) is cracked, and I hope this will fix it!

[@Rob-zf2cv]

Nice to see super glue actually working.

[@TomRathborne]

This is a great trick! I have also had great results with plaster filler, which unlike baking soda can be sculpted. Once it dries, drop the glue on and it soaks right in.

[@earlbrown7134]

Excellent video - steady camera, no distracting graphics, good audio, various ideas easy to follow.

[@DISCONTENT]

wow, I didn't think it would hold me but I found myself glued to this

[@AlKiMisT1111]

🥁 😆

[@Alexander..........]

@DISCONTENT 🤣

[@josephmoreno7156]

Brilliant

[@hilbridanongoogle4465]

Super

[@leeshepard5718]

i had a hard time hanging on too...till i added baking soda!!

[@MrGlobaldave1]

learned about this 30 years ago when a guy at a hobby shop helped me attach my RC antenna holder to the car frame. That thing NEVER came off! Pretty impressive how the two react. Baking soda turns it into SUPER DUPER glue! 🤓

[@dennisr.levesque2320]

This is better than epoxy in a lot of cases. Very handy/convenient. Thanks.

[@fredericp64]

Wow! The wife was about to trow out our plastic garbage can. I fixed it with super glue but then it broke again after a week. Going to try the baking soda trick ! Edit : baking soda with super glue toooootally did the trick wow!

[@krishna-e-bera]

was she going to throw the broken garbage can into the new garbage can?

[@tylerdurden9161]

@@krishna-e-bera oh no, that would be cannibalism.

[@fredericp64]

Ya ya totally! Inception style 0.o

[@Mystro84]

@@tylerdurden9161 I see what you did there Much respect

[@shepshape2585]

The problem with the plug at the end is that the post he replaced was the ground plug, so while the glue plug will help hold it into the outlet, it won't ground the circuit and therefore is completely unsafe. That and the fact that he probably used $3 worth of glue and an hour of his time when he could have just bought a new plug for $2.

[@bellend702]

The top pin or earth was made of plastic to start with so no earth circuit would have been made anyway. The reason it helps is the earth pin is longer than the live and neutral and when pushed into the socket it opens the blocking mechanism to allow access to the L and N holes. UK plugs, eh?

[@RobGodwin]

@@bellend702 UK yes.... but lots of other countries use the same plug

[@adi_trades99]

it was made out of plastic before breaking, so your argument is invalid

[@1Yooter]

@@adi_trades99 Only the bottom part. Plus, superglue is highly flammable.

[@ascott7321]

It was a plastic prong to begin with. Only some appliances require a metal prong.

[@ConnorMckelvie1990]

You know you've hit hard times when ur replacing the other half of your pegs 😂😂😂😂

[@chickenpopper]

How long would it take to carve a peg from a scrap bit of wood with that penknife? How many tubes of glue did to take to mould a peg? Which would last longer?

[@weetuscren]

They still sell them, right? Or did I miss the memo on the world wide clothes pin/peg shortage? I’m sure making them with glue would cost more than a whole pack of them. Tesco has 25 for £2. And what is your time worth? I love the hack though if it works.

[@ConnorMckelvie1990]

Would cost more in time than money haha

[@theodethomasa6358]

WOW! I got so many broken items I'm going to use this on. It will save me a bunch of money and help me keep the items I need!

[@PatHaskell]

Except for all the money you’re going to spend on super glue 😮

[@theodethomasa6358]

@@PatHaskell That will still be cheaper than buying and shipping new replacement items! May even save more than $100.00!

[@BigEsGarage]

As someone who repairs old things with an ever-growing shortage of available parts I will be trying a lot of these out. I'm amazed at how strong the repair is and how simple it is! Thanks!

[@seligjuggalo9378]

You got to come back to this comment and let us know how well ur repairs go with this idea

[@matrox]

Its been a month...did it work? Or is this guy using cocaine and glue?

[@leeflorence3838]

@@seligjuggalo9378 Doesnt work at all with CA Glue. Trying a few other brands now. So far this seems like bullshit.

[@Cortesevasive]

@@leeflorence3838 You need to layer it, apply the glue, sprinkle a powder and repeat. For ultimate strength you need more glue and to wait till it dries if you do it correctly it takes time, but the material is very dense and strong.

[@simonallan9941]

I have been using talcum powder and epoxy or polyester resin to repair old car parts, castings including cast aluminum thermostat housings and outboard motors corroded water pump housings etc, it even handles the heat of exhaust manifold repair

[@kevinmoreira86]

Man I used that screw repair trick on some old seized furniture and it worked like a charm. Finally a hack I can be proud of lol

[@EdCardinal-MindThump]

Mostly very clever for demonstrating Baking Soda / CA properties, but it seems to me like cutting the cord and putting on a replacement plug head would be way easier and much much safer.

[@brianstrange7942]

And the ground will actually work, because a real one is used out of metal, and conducts electricity. I'm guessing super glue and baking soda doesn't conduct electricity very well. 😳. But I loved all the other ideas!

[@rossmckillop6642]

That is a U.K. a plug for a double insulated device, the earth (ground) pin was plastic to start with as the device doesn’t require an earth connection by design. The plastic pin is there only to open the shutters we have on mains outlets. In other international markets that sort of device may be fitted with a two pin plug. I still don’t think it’s a great idea in this example because if the home made pin snaps off it renders the socket unsafe and unusable.

[@jonaskromwell4464]

I will be able to fix countless toys and other odds and ends after seeing this! One of the coolest things I've seen!!!

[@philrichardson9855]

I'm so lucky to have stumbled across your videos. I'm about to make a start railway modelling for the first time, and am keen on scratch building as much as possible, including custom made pointwork. I'll be able to use these ideas for a whole range of applications. It will probably save me a pretty penny too, rather than buying pre made "out of the box" stuff! Liked and subscribed. And thank you!

[@williamlangeii4012]

Why would you want to save a penny? They don't make penny candy any longer!! And you think Lincoln is pretty?!

[@philrichardson9855]

@@williamlangeii4012 Ah. We don't have Lincoln on our coins, it's the Queen instead. Admittedly she was pretty good looking back in the day!

[@MrCreativeEZ]

Though I am a skilled craftsman, I'm still blown away by his skills

[@Voivi]

Just a hint Phil, you can buy large bottles of super glue from companies that supply UPVC products. It's much cheaper than buying tiny little super glue tubes. 👍

[@philrichardson9855]

@@Voivi That's a good shout mate. Thanks for the tip!

[@onesavedvoice]

I can think of many times this hack would have done the trick. Wow I will never forget this. THANKS!

[@jamesmorrison7989]

Holy hell, the stripped screw repair is amazing if it actually works

[@dillardblom3312]

Another trick (used it myself) is to cut of a small of wide postage-elastics (that mail delivery guys used to have in past) or ducktape and then carefully trying to move the screw. Saved my butt more than once :)

[@georgegates526]

Would have saved me tons of time when I used to work.

[@SIS-MI6]

Had to try it myself by stripping one. It actually did work.👍🏼 Give it a try.

[@giroocho3236]

At what minute of the video is the stripped crew repair?

[@giroocho3236]

I found it

[@NemesisTWarlock]

Quick safety tip: Please wear a mask and eye protection when doing this. The fumes that arise from the mixing of those chemicals are *extremely* toxic.

[@scdhl3748]

Have some boric acid on hand in case you do get it in your eyes. Mix it in a pan w/ water, bring to a boil, wait till it's tolerable to the touch. Place a washcloth in the solution and place it over the eye, and shortly after, your eye will become un-glued. Fact Check True

[@AnAntidisestablishmentarianist]

And definitely don't snort it.

[@Telthecelt]

I used to teach elementary forensic science and used heated superglue (vapour) to develop fingerprints on hard surfaces. The vapour combines easily with organic material -like our lungs and eyes! We always did it in a fume cupboard.

[@aewtx]

I was going to fix a shoe, but now I'm scared.

[@planetcaravan2925]

@@aewtx chicken

[@hmgrffn19]

The stripped screw made me subscribe. This is great!

[@Alotipsalo]

WOW!!! Thank you so much for sharing your tips and tricks with all of us and I’m very impressed 😊

[@koanikal]

The segment with the stripped screw is pretty helpful. Thanks.

[@jamiew.lacroix7055]

I'm always amazed by the many absolutely terrific ways you come up with to use super glue, thanks for all your hard work.

[@aegisraven1284]

You mean like using it normally???

[@kilburn1313]

@@aegisraven1284 Stripped out head of the Phillips head screw repair & fixing the back of an on/off type of switch on our air conditioner has given me about 5 jobs around the house, I have no luck using it normally, even in the early 70's when rubber bumper strips became the fashion on car doors & guards replacing the stainless steel originals?

[@dmobile2go]

Thank You Sir. I can finish building the world now!

[@mikewills7185]

What a great trick. Thanks. I've recently discovered moldable epoxy made by JB Weld and others. Similar in how it can fill and hold, but moldable like putty. It has saved me a couple times, and now I have this option as well!

[@jackuzi8252]

I've literally repaired rust on my car with that: cut out rust to a regular shape, trim a piece of steel to match, use JB weld as glue. When it's dry, prime and paint. I don't have the skill to make it look quite like new, but for $40 worth of materials I'm happy.

[@heavenismyhome]

I stopped a leak in my pipe with JB Weld, awesome stuff. now I'm going to go look for something broken and try the glue and soda! looks like an amazing thing to do ;) ♥ †

[@josephdavis4956]

As a carpenter, I feel like I just stumbled upon treasure!

[@coppulor6500]

I feel the same way :)

[@FendergtrJam]

Same here

[@BMJAUDI]

Why? Are you going to build a house out of baking soda and super glue? lol

[@coppulor6500]

@@BMJAUDI ha! You're funny. But looks aren't everything 😌

[@joemamaluc312]

@@BMJAUDI Already did, other than the cloudy windows, and our eyes constantly watering its great.

[@matth8205]

Some great applications there although if I’m honest the last one seemed like it would be easier to just change the plug 😅

[@arielbernal]

And safer

[@jasonh2526]

Yup, and the 3rd prong is the ground

[@apvland]

Đang cần gấp mà không gần chỗ mua thì cách này hay hơn chứ bạn

[@ireallyreallyhategoogle]

Great way to bypass a safety feature and risk burning down your place.

[@fuzz11111111]

Yeah I was thinking the same thing there, if it's like here you can probably get them from hardware store for a few bucks.

[@omuArdeid]

Just what I needed to fix the cocking latch on my crossbow. =) Kept snapping off with only the glue.. This time I put baking soda inbetween the pieces, then put some on top of the switch piece itself, and then sanded it all down to a slightly larger, but fitting latch, I even added black dye, so you can't even tell unless you look really close. :D

[@brucejemcek6986]

Crossbow? So you can kill animals for fun?

[@TubeRadiosRule]

@@brucejemcek6986 I'm a card-carrying member of PETA - People Eating Tasty Animals!

[@mailemoore5017]

@@brucejemcek6986 Are you really asking this ??????????

[@jpsholland]

@@brucejemcek6986 or he does medieval type of shooting competitions.

[@MyHammer111]

Well next time it breaks off you may be in for a painful surprise🙄

[@liamfowell8661]

wow!! this is the single most amazing life hack I've ever seen!! I'm now brimming with ideas for this!

[@xxbambamxx7261]

Put dye into the baking soda and you can change colors on what you are making, it will look so good ✌️

[@Olkv3D]

Gettin in to the good stuff @2:25 🤪

[@KubuśpuchatekTVN]

Meth is the best

[@Olkv3D]

@@KubuśpuchatekTVN nah.

[@Gruntled2001]

Leave it to KZbin comments to vocalize your thoughts

[@amieb431]

Lol

[@redsports1367]

I was like .. Experience talks louder .. Crafty hands

[@jamesalan3450]

Great video, I wasn't sure what I was going to see. Super helpful and enlightening. Loved the fast-forward playback speed.

[@user-ot9xr4ij1m]

WOW 😀 Thank You for Sharing this ❣️ I Love your Cool Way of Using Baking Soda and Super Glue ❣️ LOL... Who Knew? I learned something new today ❣️ Hurray 🙌❣️

[@STEVE_C_1369]

In all honesty,this DOES work.I broke a pair of nice sun glasses a couple weeks ago,and did the superglue/baking soda trick.Worked out great.

[@andreamcafee9970]

Super glue is pretty good on its own.

[@STEVE_C_1369]

@@andreamcafee9970 Ive had very little luck with simple superglue. This soda trick makes the glue harden very quick,and doesnt give the joint a chance to slip.

[@jpsholland]

@@andreamcafee9970 it stick to nothing except his own cap....

[@58debjean]

What type of glue did you use please?

[@STEVE_C_1369]

@@58debjean For me,I used plain superglue.Worked great.Now,some expect it to become 'bullet proof'. It doesnt.It simply dries almost instantly.AND,the bakingsoda acts like a brick support.You cant abuse the item fixed anymore than you would if the item was new.But,it does work and works well.Also,it doesnt hurt to have a bit of logic and understanding of the ability of the repair.The baking soda doesnt get between the parts being joined.It does speed drying time.And on the outside edge of the repair,if you used enough glue to squeeze out of the edges a bit,the baking soda does mix in and again,acts like a supporting hard substance.

[@martybadboy]

I love the smell of CA glue and baking soda in the morning.

[@johnbell1810]

goes great with eggs

[@Covkiller]

This is gold. Fixed my Porsche 944 broken dash parts with ease. Thanks man 👍

[@nullstress]

Showed this video to my father. He is returning his 3D printer and just using super glue an baking powder from now on to do his work. Thanks for saving us money.

[@Neliswa24]

I’m in awe of your innovation and thank you so much for taking the time to share this with us! U have inspired me so much thank you!

[@ShastaBean]

I'm in awe of the speed at which he does the work

[@donaldswift]

Subscribed immediately. I had always thought superglue was on the weak side and needed a thickener. JB weld is my favorite glue for metals and Shoe goo for plastics.

[@4ndy1965]

I love JB weld

[@lilyleon1475]

Subscribed immediately eh? Well aren't you an obedient subject and I bet you were first in line for the jab

[@GntlTch]

@@lilyleon1475 Do you work hard to be nasty or does it just come natural?

[@donaldswift]

@@4ndy1965 Me too. Works on metal the best of anything

[@u539771]

@@lilyleon1475 Idiot.

[@MR.H883]

I'm online ordering super glue and baking soda in bulk... I'm building a house out of this!!! 😆

[@J-AID]

😂😂😂😂😂😂

[@klaushofmann9122]

OK, I want to see that 😊😊😂😂

[@figheter2881]

Im realy shocked and having problem to beleive this 🤷‍♀️

[@niv8880]

I think powdered bone and superglue can be used to mend frets on stringed instruments - it's rock hard

[@yoshy2628]

@@figheter2881 Is for real. I saw a guy who did fixed his car engine with glue and baking soda, being able to drive another 100 miles with it and arrive home.

[@drmaddi0959]

Love these vids....have used my own ideas with the sawdust from PVC and superglue but baking soda is just ready at your disposal no prep needed, even better. Wicked vid. Cheers

[@gabriellorenzo9290]

Esta muy bueno y tambien podes hacer lo mismo peeo con ceniza de cigarro la pulverisas bien en donde falte un trozo de plastico ,una oreja de guardapolvos donde va el tornillo, es casi lo mismo y es mas facil encontrar un cigarro jaa abrazo

[@flyurway]

I like how he made the thumbscrew at around 3:30. The last one doesn't look really smart if you should ever need that ground to work!

[@gdutfulkbhh7537]

It was the plastic kind that just push open the holes on the outlet - when the appliance itself isn’t earthed.

[@smufinstuff]

I think you're confused...

[@avleathercraft648]

Would be quicker to cut the plug and replace it

[@asirvis00]

@@smufinstuffare grounds really that necessary after all… 🤭🤪😂

[@sparkywirenut]

@@avleathercraft648 And safer

[@larevolution13]

I see you got a lot of experience with the soda lines brother xD

[@tomhardy8967]

Yeah those were a bit too perfect 🤣

[@richardwood1575]

😂😂

[@marcusmerriman445]

2:20

[@louisexplains2175]

My thoughts exactly!

[@wiredawg2005]

LOLOLOLOL

[@michellekrueger5122]

I am 60 now..been using crazy glue and backing soda on repaired since I was 12... Great for sealing the top of shrapnel and bleeding wounds.

[@edwinbaezjr.945]

Used in Iraq!!

[@TheGunnCat]

The guy that invented crazy glue told me that was exactly what it was created for.

[@FoundingYouTuber-2005]

The only thing I'm lamenting is that I consider myself pretty mechanical and a half-way decent DIY guy. Sadly, I didn't know about this. Now, come to see on KZbin all these channels showing just how strong this combo is. Now I'm gonna keep a box of baking soda and my super glues in a box together with my other glues.

[@jackjamesbitch]

Just don't use it to replace the ground on a 250V plug! Haha!

[@51hankyspanky7]

@@raknoknak C'mon - bakeing soda - dummy!

[@balazsbordas1214]

@@jackjamesbitch he wasn't replacing the ground, that connector didn't actually have ground

[@nazaxprime]

Next to your respirator, I hope. Composites are great.

[@stevenfairlie3407]

@@jackjamesbitch would have been so much easier to cut off that plug and replace with another.

[@conradsutton]

Didn't know the baking soda would act as a bonding agent with super glue. Thanks for the video!

[@joedirt3563]

There is an accelerant spray for super glue but it doesn't mold like baking soda.

[@SAFeCRACKeR09]

2:23 my mind started recalling things I did in my 20's :D

[@escfxp]

Hence the CRACK in your name?

[@SAFeCRACKeR09]

@@escfxp Haha no, but good one 👍

[@perokeay]

2:24 is the explanation to the entire video.

[@liamsellick6664]

More of a 3:55 myself

[@visionandvoice2819]

😆 I see what you did there.

[@AnAntidisestablishmentarianist]

Well it takes a lot of long hours to get over 4 million subscribers.

[@natepoodle9132]

Up until that, I thought he was using baking soda!

[@WingoTribe704]

🤣🤣🤣🤣

[@rhmagalhaes]

This is just amazing and should be taught in every school!!!

[@williamlangeii4012]

Umm, they don't teach anything in school these days, haven't you spoken to any young person?

[@Runthis313]

@@williamlangeii4012 Right, at least they teach you what gender you should be. Ya know, the important stuff

[@VirtualTexan]

I finally have a reason to buy that 5 gal bucket of superglue at Costo that I've had my eye on. 😉

[@RestWithin]

Brilliant! Imaginative examples! Thanks! Off to look for baking soda and superglue in bulk. I’m going to craft a boat and sail off into the blue. ⛵️

[@Runthis313]

Nice sounds like a winner! Such awesome idea and with current weather patterns and water temps, if you travel at a rate of about 13k/hour and set your sails due east you will get to a whopping 46 ft before you begin to sink. Have fun sir.

[@chrispham1113]

Let me know when you finish!

[@jmigserra1986]

How is it going with the boat build?

[@RestWithin]

@@jmigserra1986 I fashioned a raft with superglue, baking soda and plastic coke bottles, I left Anglesey and reached Dublin the next day, I was parched and decided a pint of Guinness would quench my thirst. Unfortunately, I never made it out the factory bar, but I’m ok and actually quite merry all considering. 😉

[@jmigserra1986]

@@RestWithin I am sad KZbin didn't notify me with your answer, but I checked today to see if you had news. I am glad you had such an amazing adventure 😀😀😀

[@robertchiarizia9463]

This gave me a large amount of ideas to try. Thankyou. Primitive skills version of 3D printing. Love it.

[@jonnscott4858]

Best tip I have come across in a decade of youtube., thanks

[@RafikMankariosDrumStudio]

This makes me want to breat stuff just to repair! Genius video!

[@AntonyDudley-rg3pj]

Beware that mixing superglue with a powder will accelerate the reaction, which is exo-thermic - it will get hot. Note the smoke visible in some shots..

[@tamekacato2994]

Yeah I did see that. I want to go back to school and I am 47. Lol. So mad that I didn't apply apply myself as a student. Great channel and great comments. God bless...

[@stevenfairlie3407]

toxic fumes too

[@terrapoetrynmotioncooks106]

That might be why he made sure the smoke was visible.🤔 I wasn't sure at first of what was going on, but it caught my attention and gave me a warning ⚠️. Thanks for this info/clarification!!!

[@terrapoetrynmotioncooks106]

@@tamekacato2994 You can do it... Go to school, don't be afraid.

[@terrapoetrynmotioncooks106]

@@tamekacato2994 by the way, you and I seem to share a family name... Cato....

[@patrickoneill1011]

Amazing video!!! I'll add this to my tool box. Thank You! 👍

[@billboyd4051]

Its a great way to secure your tools to the bottom of the box.

[@HumbleFoxGaming]

Seeing how that guy made a wrench with soda and glue I think I finally found a quick and easy way to copy my neighbors key. Lol

[@LopsidedMoz]

He didn't show it in use though, it might shatter or snap easily

[@michellekrueger5122]

No laugh...it works well..key imprint in too wax or clay....have fun.

[@scottandroni365]

LMFAO

[@hextremelydesirable1648]

@@scottandroni365 the only thing that is funny is your crypto wallet.. HEX coin $0.03 PZEN coin $0.0038 ... with PZEN there is no lock up and your coin balance goes up every day.. albeit quite slowly currently at these early low volume levels, but look into is so we dont laugh at your crypto wallet anymore

[@jackmarwick2936]

You only need a picture of the key now and scale it to be 3d printed

[@andyp9131]

Amazing and the spanner wow the best I've seen IAM making some spare spanners now just two that I use most thanks for the video

[@BryanAlbury38]

Been using this since I was a kid and I had to fix my radio control car parts when they would break. It definitely works better than anything else

[@afiqalbawah4039]

thanks for confirming this tips...

[@DailyBrusher]

Does the powder need to be baking soda (sodium bicarbonate)? Or will any powder work, so long as the grain don't break down into dust?

[@Fukkeduck]

@@DailyBrusher You can also grind something like pasta into a powder.

[@chibuzo7746]

@@DailyBrusher most facial powders work, even fine particles of sand. But I think baking powder works best

[@Aaron-ui9kc]

If you sprayed the blue moulds down with silicone spray like you did with the spanner & bolt, it may come out of blue mould easier

[@loshiseng1339]

Is the blue mold a playdough?

[@JDotFavs]

@@loshiseng1339 yes it is. Used playdough many times for the purpose of making a mold.

[@brandonclopton]

I take it this dude's British

[@Dickwooten]

@@brandonclopton Why? Because there is no sharp point on the knife?.

[@brandonclopton]

@@Dickwooten LOL no because they said spanner and add u to words we don't

[@lazybbones]

We used to have a guy come to our Home Show in the spring, demonstrating a product called the Last Glue You'll Ever Need. It came with a white powder that made it much more effective. Now I know why. Only problem was, that product was very expensive. This idea is WAY cheaper.

[@leceillebeckmeyer3195]

This is great! Even if me and my drill don’t exactly get along. I know others that can! Thanks.

[@jackdurden466]

Definitely the stripped screw fix was worth the entire video. I’m gonna use these hacks now as my own idea, and take all the credit. Thanks!! ✌️

[@perindne]

Yay to using the super glue hacks. Boo on taking the credit!

[@kotresh]

U can just buy a new screw right?

[@noimagination99]

Awesome, and KZbin shows me a video about using baking soda on a $1 steak, so naturally, I combined the ideas and now I have a plastic encased, hard yet tender, steak! Yum!

[@andrequalls7156]

I like the way he chopped the powder up with the razor

[@211steelman]

Took me way back.😃

[@RRodriguez1904]

Gave me a flashback headache 😵‍💫🤕

[@piendawg]

clearly was pro in his former career lol

[@mumbles552]

He can probably roll up a $100 bill pretty tight to! 😎

[@ChrisCooney236]

LOL

[@ginac733]

Thank you, that was amazing! Super glue doesn't usually work. My rock slice got broken in half from our Christmas Earthquake. I tried super glue, didn't work. Then I saw your video, tried it and Halleluyah, my rock slice is back into one piece! Much love 🙋‍♀️💕✝️🇺🇸

[@shable1436]

Spray the clay or playdough mold with oil or hair spray so you can pop it out clean

[@DimaNBRO]

А как же поэбатсо

[@ussmillerco]

Buy a can of spray release agent from tap plastics.

[@headdrumzmusic]

I should be sleep right now but I can’t stop watching this

[@Gumby1978]

Excellent projects! Thank you for the ideas!

[@leonhughes9014]

he made a spanner he already one of the same size, half a peg which are about $0.02, fixed a plug.... that situation has never arisen anyones life and a fan cover for a fan that didn't need one... the best thing from this video was his clean columbian marching powder cutting!

[@mibidoit]

Thought the video is about to make a 360 degree turn at 2:23 😂😂😂😂😂

[@ChrisCooney236]

LOL

[@calsius3502]

Haha

[@coolguyxoxo]

180😂

[@KarenRiordan]

VERY INTERESTING AND INGENIOUS! I could have used this idea many times when super glue failed in my projects. Great music, too!

[@chloedevereaux1801]

ingenious?????? this is an old modellers trick, its over 40 yrs old...

[@chamuuemura5314]

The music piece was very good!

[@terrytaylor546]

The way he racked up those 5 slugs tells me he's had a few white Christmas's 😂

[@theodoremarakas9899]

Naughty thoughts....LOL

[@adognamedmiley6848]

This tells me you've had none.

[@tommiller6580]

The correct spelling for plural of Christmas is spelled 'Christmases'. Thank you !

[@gothmaniow]

Annnd award for the Best comment goes to .....😂😂😁👌👌👌😎 👃🗞💭💭💭💭😜

[@alexhazelwood1616]

@@tommiller6580 How's Karen, Tom?

[@ArchangelExile]

My dude used super glue and baking soda as a ground for an electrical plug...

[@craiglachman1379]

Shocking.

[@raycota4322]

Definitely has some good uses . How did you figure this one out .....excellent video !

[@dougg5707]

I guess if you cant afford a 3d printer and accessories this can be handy. Try using ceramic powder of different grades. Silica too. The old fashioned crazy glue is best for making your own abrasive Dremel accessories because its the most brittle. It needs to wear away as quickly as the cutting media. Diamond chips wear slowly, ceramics can last a while too, and silica wears fairly fast but its very sharp and stays sharp because the sphere breaks to expose a new edge.

[@PCNormann]

Have seen a lot of this kind of KZbin with handyman tips etc. But I came across this one, which is the most beautiful I've seen so far. Movies, filming, sound effects, etc. just work perfectly. Gives a small laugh of excitement at times. And then I almost forget the fantastic tip - Many thanks!

[@hjander]

Well said, I concur wholeheartedly.

[@peterdarker1]

I watched the Oscar Nominations this week and I agree this video was snubbed

[@lyrr2582]

I used this into our broken toilet tank. And it really helps me save money. Never had leaks for 4 years now.

[@J-S_93]

I'mma try this out!

[@darrenhirst9900]

He can't afford pegs, but he can afford glue 😂 Absolutely brilliant and loved it.

[@slapspinjakk6227]

glue & playdough ha.. :)

[@darrenhirst9900]

@@slapspinjakk6227 Yeah lol

[@darrenhirst9900]

@@slapspinjakk6227 That's so true and it was funny. Thanks for the laugh, man.

[@chibuzo7746]

Why buy it if you can make it? I don't have anything to lose if I have super glue and baking soda and time.

[@darrenhirst9900]

@@chibuzo7746 I agree buddy I was just having a joke. The things he made were cool and respect to him.

[@TheTrooperGirl]

Thank you so much for taking the time and sharing your great idea's!

[@matt27027]

2:23 wow. That guy's good at making those lines...

[@henbog4073]

Sure he is 👌😅

[@barkingshark6413]

Yeah, reminded me of the 80’s

[@TheAzetas]

I just fixed an earring I need for a wedding this Saturday with super glue and baking soda😂😂😂. This is so cool. Thanks!

[@robertschlumpberger22]

Recently I saw a demonstration that used shaved pencil lead instead of Baking Soda. The demo appeared to show the pencil lead worked a lot better. I'd consider trying both to see which one worked best in varying conditions.

[@Hammersmithblues]

Or just get some graphite powder instead of shaving pencils and possibly cutting yourself

[@Ozninjaguy]

Same guy.

[@tonyhoyt]

What’s the best glue for the job?

[@Witchy1976]

That was probably carbon. Pencils aren't made with lead anymore these days.

[@Ozninjaguy]

@@tonyhoyt Any 'super glue' - made from cyanoacrylate.

[@Jessicatt88]

You can also use steel wool to fill in stripped screws

[@stjohnssoup]

Beautiful video. Music, sounds and skill. Thank you

[@therealking6202]

I'm a ninja when it comes to stripping screws, so that threaded screw trick is awesome.

[@UltimaOnlineAlpha]

Nice work! Normally I just break things worse instead of fixing them.. but now..!