RIDGID Tool and what really went down during the Ridgid Office Tour - AND New RIDGID Tools Announced

[@2121contreras]

Another great show. Yeah would definitely be willing to start using rigid again . Only problem is that all my tools are milwaukee. And like many others I'm sold to that platform. . This whole platform thing has everybody on lock. Hard to break out now. You should do a show on platform management ha ha. Hey be nice feed Vince just don't feed him passed midnight. You should be ok

[@ToolReviewZone]

Omg, hahahahahaha....... Gremlin Vince hahahahahahaha 🤣🤣🤣👊👊👊👊👊👊

[@Aepek]

@@ToolReviewZone would love to see Vince has Spike….,can you picture gremlin Vince with hair like that🤣🤣 Love ya Vince✌🏻

[@ToolReviewZone]

@@Aepek omg, I just did🤣🤣🤣🤣🤣🤣 May need to photoshop something up Aepek!!!

[@AlexRides808]

@@jmackinjersey1 Not enough to start on? Not sure about that one. I started with one of their black friday kits (impact, hammer drill, circ saw and recip saw) a few years ago. Unless you need a specialty tool like a rotary hammer, that seems a pretty good kit to start off with in my non expert opinion.

[@420drwilldo]

They make battery adapters, they don't cost that much either,,,Bing bam boom Milwaukee battery on a craftsman drill

[@Sazonman]

The interpretation voice of Vance had me rolling😂😂😂😂

[@ToolReviewZone]

🤣🤣👊

[@VCGConstruction]

I'm starting to think that you and your "TWIN" are the same person, he told me TRZ stayed home! In this video you said "you and your ARCH NEMESIS", either i'm confused or you have a SPLIT PERSONALITY! I'm gonna start calling you Cybil!

[@Griffinwoodworks]

Y’all do a video together already lol. It’d be epic.

[@PowerToolsForBeginners]

LOL!

[@GunShow.]

LOVE YOU BOTH! ALWAYS excited to watch the new content you guys put out! I'm 100% down with seeing you guys finally do a video together!

[@meagaindave2049]

@@Griffinwoodworks They have, and, yes, they're hilarious!

[@bluemantom77]

They already have done a video before

[@shannonholmes2494]

I would love to see a Ridgid Brushless Right Angle Impact Driver.

[@IanMM88]

Ridgid is the Cleveland Browns of power tools

[@ToolReviewZone]

Ouch 🤣

[@IanMM88]

@@ToolReviewZone Better stick with the Pittsburgh Steelers of power tools. You know what it is... 😆

[@Konstructed-By-Kantoski]

Did anyone else notice what look like a pair of sub compact ratchets in the background, to the left of Vince, at 4:18 in the video?

[@-d9149]

4:40 on the far left you can see a new ridgid 18v ratchet/right angle impact driver

[@amaturetechnician8405]

I would like to see them come out with a cordless ratchet and right angle impact so I don't need to invest into two other tool brands.

[@TheJnblackwell2007]

Yes! A high speed ratchet and right angle impact would be awesome!

[@Konstructed-By-Kantoski]

They are coming out with a ratchet. Look at the background around 4:20 in the video. Behind Vince...

[@TheJnblackwell2007]

@@Konstructed-By-Kantoski good eye! I wonder if there are some other nuggets in the video.

[@scottcpan68]

@@Konstructed-By-Kantoski Awesome, I've been waiting for this. From what I can see, it looks like maybe a 3/8" and a 1/2" drive version.

[@phxgen]

@@scottcpan68 I believe that's what I've seen as well, but a ridgid rep straight up told me just the other day that a ridgid right angle impact isn't currently on the table. Shame, the new SC RA drill is surprisingly good.

[@3RiversFishingAdventures]

As a casual user/homeowner, I bought into the Octane line. I now have a handful of tools and batteries. What I want is more selection of tools that a DIY might want. Not necessarily contract grade, but a variety. Enough with the drills. Also some decent yard tools like a weed trimmer and chainsaw would keep me in the brand for sure.

[@bbglas007]

Aeg have a chainsaw. It's the same company but Europe/ Aus name branding

[@MrHowieZ1973]

I would love to see a smaller 12volt brushless line from Ridgid. Their last 12volt system was huge.

[@ToolReviewZone]

A lot of people say the same Howie. I haven’t heard anything yet, but it's possible l. I'll keep my ears open brother 👊

[@painkiller8079]

TTI also needs miwaukee to make money

[@EternityForest]

I would like there to not be any more new battery platforms invented for a good long while, unless they are some kind of brand neutral open standard. It's mostly all TTI, they're very good at what they do, adding any more lines just reduces the odds that any new tool you want is on whatever platform you use. Now if there was a neutral standard in the same way that WiFi and USB are standards, and it actually got support to end this fragmented battery thing once and for all, that would be cool.

[@stevenhobson2292]

The crowd was chanting "let's go Rigid" I think

[@ToolReviewZone]

Hahaha

[@Cocothegorilla05]

I would love to see more job box options from rigid. They have a good base with the 3 piece, organizer, crate and mobile box but can we get more options please.

[@MrSubaru1387]

Wait a minute, wait a minute... Where in South Carolina? I know where the SB&D plant is on the SC/NC border. Where's the Ridgid plant?

[@jovanventura8726]

Ridgid is coming out with a cordless ratchet!!! Just saw in email today, any videos on this yet or planning on it? Also, how does the new brushless circular 7 1/4 saw compare to the octane one? The octane is 200rpm faster even though the new literature states the new brushless one is 35% "faster"... Faster than what?

[@ToolReviewZone]

I'll check it out for sure 👊

[@jovanventura8726]

@@ToolReviewZone can't wait!

[@ToolReviewZone]

👊👊👊

[@carllamb6711]

Great video Clint Real Nass Like. VCG who ? Lol 😝

[@ToolReviewZone]

Hahahaha, thanks brother

[@floobertuber]

Here's my humble opinion that exactly nobody has asked for: 1. Gen5x: The Gen5x tools were very good for their time. Switching from the older 14.4 NiMH batteries in their older tools to using Li-Ion was a genuinely positive step forward for me. 2. Octane: On the whole, these were very, VERY good... and were priced appropriately. Although some of the tools were a little on the large side, the ones I've used are quite powerful. Arguably, the Octane 9Ah and 6Ah maybe should've gotten 21700 cells. The 3Ah had those cells, and was a very nice balance of power delivery and weight. But the Bluetooth battery features were pretty much useless (at least for me). RIP, Octane era! 3. The current stuff....? Ehhhh ... 👀 ... The jury is out, but I do think this latest head-to-head is a good sign, regarding performance of the tools themselves. Not real happy about the deleted features like the dedicated handle light-switches, but it is what it is. I'm not so sure about those batteries, though. Time will tell.

[@ToolReviewZone]

Great feedback brother 👊👊👊

[@floobertuber]

@@ToolReviewZone My pleasure, Clint. 👍

[@Rapidfire556]

Glad I'm not the only one that's going to miss the light switch. I use that 99% of the time before using the tool regardless of what the tool is. Have to agree though - the Octane tools I have are easily the best. Wish they didn't kill the JobMax.

[@floobertuber]

@@Rapidfire556 Right? It seems like a small thing, but as I'm cleaning up after a project when the daylight is already gone, it's priceless. It's really helped me wrap things up and call it a day, more than once. Not to mention, it's great having it while doing actual work!

[@dandredevine4385]

A 20 oz sausage tube kit for the caulking gun would be great 👍

[@jovanventura8726]

How do you feel about the new one handed recipe saw vs. the one handed octane version? Any thoughts on how you think it'll compare to the Milwaukee one handed hackzall?

[@ToolReviewZone]

Hahaha, just seen this 👊🤣

[@chrisgoddard8892]

Being in the Ridgid line I hope the best for the future of these products. But if you go check torque test channel you can see the 3ah octane battery outperform a new 4ah max output on the 1/2 inch High torque impact wrench. The octane providing 791 lb-ft and the max output sitting at 756 lb-ft. (The tool itself being a monster). That being said the new 8ah max output is supposed to have 21700 cells. So hopefully they will be an upgrade in performance.

[@lesswatt]

I don't think Ridgid had any choice on removing the Octane batteries they were sued by Milwaukee over the Octane batteries. If it all seems weird it is because Ridgid you see being made at the TTI factory, but they are owned by Emerson not TTI. That factory is the same one that makes Ryobi as far as I know which is owned by TTI. Milwaukee is owned by TTI but engineering development is at a location near Milwaukee as far as I know. So there may have been issues with the Bluetooth on the Octane batteries but from what I read Milwaukee sued so they had to work around the patents. So afterwards Ridgid gets stuck with less powerful tech it seems on the batteries. It seems likes it's just two more connectors to sense and feed more power.

[@jacksmith2315]

The 3ah octane has 21700 cells as well. Prob why it outperforms the max output 4ah. That beind said, it was very stupid for ridgid to drop the octane line. I know they had issues with the bluetooth, so they should have just went away with the bluetooth but kept everything else the same. Octane was their best line of tools and batteries. Very stupid they dropped it. The steathforce didnt last long either. Not sure if it was any good or not. They just cant seem to stick with something for more than a couple years, if that. Jobmax was great too. Another thing that was stupid to discontinue. Im in the ridgid line, but im going to be switching out when i have to replace or buy new tools. Sucks cause i like pretty much all their tools except drills and recips, always have problems with those two. I just dont feel confident in the future of the company to stick with them. Ill prob switch to makita or metabo htp.

[@lesswatt]

Milwaukee started sending legal notices some time after Octane batteries came out that Ridgid was infringing on battery technology patents and then they sued Milwaukee. I'm sure this had more to do with dropping Octane batteries than the Bluetooth issue but I maybe wrong.

[@jacksmith2315]

@@lesswatt milwaukee prob sued ridgid because ridgid wasnt paying for the rights to make the batteries. Anyone that make lithium ion battery packs has to pay milwaukee. Ridgid made batteries after octane, so they could have still made octane batteries wo the bluetooth.

[@deanfirnatine7814]

Ya I saw that, not a good sign.

[@kevinandersen8951]

What do you think of ridged trim routers?

[@ToolReviewZone]

I use mine all the time. The on off switch is a bit irritating, but other than that it's great

[@jovanventura8726]

I think Ridgid should come out with an extended neck cordless ratchet... I think it would sell well vs. A regular head one. Also, the aeg lawn tool line brought to the USA... Doubt that stuff would be covered under the LSA but if so it would be a game changer for the cordless outdoor tool industry

[@AntonioClaudioMichael]

Lmfao the Philly cheese steak bit is Hilarious Clint 😂 🤣🤣 @ToolReviewZone

[@ToolReviewZone]

Can't believe he got so worked up over a sandwich bro 🤷

[@ricardogoodwin5908]

I have 3 ridgid tools since 2019 and they still work very well today. All are Octane (a hammer dril, a circular saw and an impact driver).

[@mfetzer1]

Vince is a professional baby and I don't know why everybody cowers to him!! This is nothing new the guy treats everybody like s*** especially when he's not the star!!!

[@loosescrewzzviews]

I wish ridgid would make a tool box with drawers that would work with their current pro tool box stacking system.

[@Liazon098]

I own only the 7 1/4 miter saw and I love what it is and how it performs. To be it is the best bang for the buck out there if you’re not married to tools. If they were to impress me is to drop many tools for a trade like Milwaukee. For instance I think one of the best things they could do given the power of their 6 1/2 saw is to have a framing saw like a blade left worm style saw that is battery. Seems like a reasonable move when I think they could make all matters of battery powered nailers with guides/rulers and lights from metal connectors or roofing. Make rough framers happy. I am a Home Depot shopper and most people in there especially California is adding on things that need studs, joists, and rafters. Make framing great again!!!

[@jasonvliet-odonataknifeworks]

Hey Clint…did they give you any indication as to weather or not they were going to add yard equipment to the line up? (Since they’re already produced under the AEG label). Thanks.

[@ToolReviewZone]

Awesome question Jason. I actually brought it up and pushed the question a bit. Did get an answer, but I felt as if they are looking into it.

[@JoeDeGuidopastorforchrist]

Vince needs to chill. U know the thing I love about ur channel is that you keep a great attitude and u make it fun. My son thinks u r hilarious. Vince on the other hand presents himself as someone who is owed something just because he’s “Vince”.

[@ToolReviewZone]

Hahaha, thanks for the comment and tell your son I appreciate the support 👊👊👊

[@markmatsuda1]

When are these going to b available.

[@TheJnblackwell2007]

I want to see more of the smaller size 21700 battery packs

[@michaelpasquarello2392]

I'm on the ridgid platform and it would be really nice if they made the same tools as Milwaukee and Ryobi. I would love a weedwacker and blower I already have the batteries I just dont want to have my bench filled up with 2 or 3 or 4 different chargers. I see whats going to happen here. I'm getting forced into another company platform because they have many different tool varieties such as automotive, lawn and garden, etc and my ridgid tools is going to be pushed aside and eventually sold. Ryobi is looking better and better with there new line up.

[@ToolReviewZone]

I agree brother. I also really want an outdoor line

[@firebirdlover4460]

I think TTL deliberately keep the Ridgid lineup limited so that it doesn't eat too much into their Milwaukee line. With Ryobi being the homeowner line that most pros won't take seriously, they can expand it out exponentially with no consequences.

[@PartyMcFly]

I'm a huge Ridgid fanboy. I been in the Ridgid ecosystem since the x4 tools. The LSA sold me years ago when I was picking a brand. I put every tool I own through hell and back, literally, I build haunted attractions. It's probably why i'm drawn to the black and orange, I love Halloween. I have yet to have one fail. I haven't used an LSA yet and every single Ridgid tool I own is still rockin' like the day I bought it.

[@ToolReviewZone]

Appreciate the feedback and comment Party👊

[@erica1957]

I like how Ryobi makes a lot of non-tool products like sprayers, seed spreaders, pole saws, weed wackers, etc., and you can use their batteries on them. The last thing I need is another collection of batteries and chargers. My only complaint is that I get ridiculed by tool guys when I use Ryobi but it works for me. Ridgid should consider expanding their universe.

[@ToolReviewZone]

Agree with what you said, but as far as the other guys....tell them to buy you new tools of STFU 🤣👊

[@unintendedpurposes]

I'm not sure you're familiar with the definition if a "tool"

[@josueflores3262]

I got my ridgid vacuum because you hype me up on it. I do own milwaukee fuel tools that I enjoy using for my home projects. I love the respect you have for other companies and I have respect for you bro keep up the funny dope videos

[@alwayseatinpotatos]

I sold alot of my contracter grade tools when my mom got sick to take care of her and bought a ryobie set back in the day just to hav somthing to fix stuff around her house b4 she past and I really liked ryobies old school cordless trim saw for small projects I think it was maybe a 5 & a half inch blade it was small easy to use and light I used it alot . I really used it alot to cut up branches to fill my grill and for small projects Something in ridged like this would be great , I just got the cordless ridged skill saw and it's great ... I just bought 4 of there 2peace drill impact driver kits for ridged couldn't beat the price point and price on battery's this holiday season with ridged plus I bought xtra 2 packs of 4 mah battery's the chuck on the heads of the ridged drills are a plastic material though my old makita set had rubber grip the difference when I go to tighten the chuck after putting a bit in it the plastic givs u a light friction burn 🔥 my old makitas I never had the problem there was no excess spin when tightening the chuck when changing out bits because it grabbed ur had better and stopped when it was tight .. that's the only desighn flaw I found with the new ridged drills which causes some times the chuck not to be fully tightend enough and my bit falls out occasionally due to I hurt my hand trying to close it properly so now I just where a glove on 1 hand to stop this problem ..

[@GS-lh2nx]

Did they say anything about their 12v line. I feel like they are abandoning the line. Is that true?

[@ToolReviewZone]

What's up G S. They didn't say anything, and I believe your probably right. Many seem to really like the 12v and want them to stick around

[@GS-lh2nx]

@@ToolReviewZone Thx TRZ I have had mine for about 10 years. I really like them but they have almost no tools and even the batteries are hard to find anymore. Milwaukee, DeWalt, Bosch, and Makita are all investing and expanding their lines and it feels like crickets from Ridgid.

[@GS-lh2nx]

Also, are you sure Vince and Randy aren't the same guy? Just saying or at the very least maybe Randy is on Vince's payroll

[@jameskennedy673]

👏👏 I don’t have Ridgid tools, but our Son has the circular saw & it’s fantastic

[@kevinandersen8951]

I am a diehard ridged fan and always will be. Period

[@chaserchaserspeedracer]

Must be a plumber.

[@ChiefHamza]

Are these products out already or when is the possible release date

[@gregberning6721]

I want my damn 18v compact shop vac. Where are they???? All sold out

[@big_mike_nyc]

Of course it got awkward for Vince hes on Milwaukee’s payroll…😎

[@1975oldschool]

Bahaha

[@robertallardice8119]

Milwaukee and Ryobi are part of the same group TTI based out of Hong Kong.

[@RyanBissell]

@@robertallardice8119 that's the joke

[@wyattprothro7443]

@@robertallardice8119 Milwaukee ryboi and ridgid are all owned by tti

[@jamesmclaughlin272]

I just bought into the whole Octane lineup this year and only after I was through most of my purchases I learned that Octane was going out the door, along with the jobmax system. I think it's kinda fortunate I got before it was discontinued as to me the whole new lineup looks like a downgrade and I'll probably be buying whatever misc. GEN5X stuff I don't have before all the new stuff comes in next year. The only thing I like are the new chargers and nailers (even though I'll probably be buying pneumatic ones instead of the battery powered models).

[@azndoodle1]

What's the model for the cordless 6.5in circular saw?

[@tidebounce9149]

Awesome Video!!! Is there actual footage of the coffee "spill"?

[@ToolReviewZone]

I had it until one of Vincent's team members stole the memory card out of my camera with it on there!!! 😢

[@KasparJames]

🤣🤣🤣🤣🤣 The "caught audio" is spot on!!!

[@ToolReviewZone]

Hahahaha 🤣👊

[@PCAPro]

Can you tell use which Dewalt model the recip saw was

[@danielu8328]

Great video! The Vince segment was hilarious!🤣 The Ridgid line deserves a look.

[@Dseated]

Did you try swapping the blades

[@ToolReviewZone]

Same exact blades

[@thebrokesoulone]

Ridgid guy myself for many years,love the warranty and quality,the job box carry boxes and all are great. How bout a good Ridgid brand Tool backpacks, maybe some good hand tools. Milwaukee has created a great line of wrenches,pliers,cutters etc etc.

[@nathanmetcalf4342]

Does the new circ saw come with a truss hook? It's a deal breaker for me if it doesn't

[@MrStanwyck]

Great video Clint. When will you be having the video comparing the new Ridgid orbital recip vs the Milwaukee Gen 2 or Super Sawzall. I’ve been eyeing the Gen 2, but I would get the Ridgid if it performed as good.. Thanks for what you do for us tool aficionados.

[@ToolReviewZone]

I believe I did that vid a while back. The Milwaukee won that, but I believe the RIDGID beat a few other brands 🤔

[@MrStanwyck]

@@ToolReviewZone thanks Clint. I saw your video introducing the new Ridgid orbital recip, but I could find the comparison video. I do like what Ridgid is coming out with. I can see why Vince didn’t think too highly of Ridgid before you guys visited them.

[@thetoolmat8632]

I was raised in S.Philly - V said we went to the same school GCT- I have been drugged up with a shoulder injury for two weeks and man when you did that skit I frickin laughed and cried out in pain for the entire time…thanks i needed a laugh man.

[@ToolReviewZone]

Hahahaha, so sorry for the pain caused brother. Glad you were able to laugh though Toolmat. Get better soon 👊👊👊

[@tomg3285]

Yes sir there's no denying it that's Vince's voice on the video!! 😂 Great video brother 💪💪

[@ToolReviewZone]

Hahahahaha, 99.999% it is brother 🤣👊

[@scottfletcher1956]

When I first got into construction 20 years ago I heard rigid tools were really well made. Funny. In 20 years I’ve rarely seen a tradesman use their stuff. It’s Milwaukee or dewalt, occasionally makita. I personally use Milwaukee everything. I’ve never been more satisfied with a tool manufacturer. Highly recommend for plumbers.

[@ToolReviewZone]

Can't go wrong with Milwaukee 👊

[@pheelix-]

Talk about stacking the deck. 4:03 look at the bits, they are different. And I bet the one on the dewalt is duller. Swap the bits next time and see what happens. The saw blade on the dewalt was probably dulled as well.

[@normdurkin6425]

..very interesting thanks professor

[@AntonioClaudioMichael]

Good video as always Clint Real Nass Likeee @ToolReviewZone

[@ToolReviewZone]

Haha, thanks brother

[@mikewhite4768]

I’m waiting on a ridged chainsaw ! Would also love to see a ridged bicycle .

[@Rapidfire556]

Area you waiting on the chainsaw to power a bicycle? Because I'm kind of shocked that this has never been done.

[@mikewhite4768]

@@Rapidfire556 no chainsaw is separate . A while back I seen a video of a guy who made his own electric bike powered by 3 makita batteries.

[@karlx-1]

I love Ridgid tools. They warranty their batteries for LIFE. There's a great reason for investment. Now... PLEASE make more automotive tools!

[@costavong6018]

do you see ridgid cordless table saw prototype?

[@mav5204]

Did you review there bansaw?

[@L0n3S0m31]

Hey cuz , great video lol love the content question do you think if we leave some comments for Milwaukee they will read it?

[@jinpark5324]

Actually, I like my RIDGID tools especially the Octane high torque impact wrench and mid torque impact wrench.

[@ToolReviewZone]

Their gen5 wrench was a beast 💪

[@geraldp3790]

I really like the fact there circ saw blade is on the left side. I have the Octane and its on the right side of the saw.

[@ToolReviewZone]

A lot of people were asking for the left, so maybe that why they did it 👊

[@johnnyrojr13]

Any idea ish on release dates or like season?

[@ToolReviewZone]

If I remember correctly, which I probably don't 🤣 I believe December

[@johnnyrojr13]

@@ToolReviewZone haha ahhh beauty so soon👌🏼 been wanting and wondering when ridgid was going to come out with the brushless 61/2 on the left glad I didn’t sacrifice and get the brushed

[@ToolReviewZone]

This saw is a beast brother 👊💪

[@Aepek]

2:50 love that she said, “when this launches”….b/c everyone knows when comes to tools and tech; being on top can be short lived🙃

[@atowns3364]

The rigid recip saw had the easy wood. The DeWalt is on a knot lol

[@Tigerxx89]

Thought the same thing either way I Love both tools.

[@atowns3364]

@@Tigerxx89 so many people thought the same thing, that Vince made another seperate test video. Spoiler alert the rigid still wins

[@Tigerxx89]

@@atowns3364 that’s cool, again I use both I’m not hung up on bands Dewalt will just make something to Compete with it if not better. This is a Trend with tools to keep people buying the same tool over and over that’s more efficient throughout the years.

[@gregoryvanek9038]

Been waiting for a Ridgid right angle drill/driver

[@ToolReviewZone]

Wow, I'm a huge fan of yours Freddie!

[@Arkansasdiamonddenis]

I have a lot of ridgid tools..that new saw there the blade is a lefty..which I call a worm saw...i have the same saw but its a righty..i just bought the biggest snake they make..to unclog vent pipes and drains. Ridgid tools are cool with lifetime warranty you just have to register them

[@johnschmit9903]

I have a few ridgid tools which I like. No cordless tools. Really want a cordless skillsaw. Rigid, Milwaukee, Etc. Which one would you buy????

[@ToolReviewZone]

Id go Milwaukee at this point. They are basically top dog right now, but.... Dewalt still makes my favorite saws. Love me some Dewalt Saws 😍

[@johnschmit9903]

@@ToolReviewZone Thanks for the input 👍 👍👍

[@ToolReviewZone]

And to you as well my friend 👊

[@gearfireman]

I want a multi tool like the octane version. With interchangeable heads

[@georgechaney2579]

My favorite tool from rigid is the stealth impact driver. oil driving. That thing is a beast. I have the octane hammer drill. The chuck doesn't work right. The drill always loses power and doesn't work. I have to beat on it to get to speed up faster. I loved rigid for years. That's all I bought. Now I switched back to dewalt.

[@jts4248]

Awesome came to my state South Carolina. I was one of the people that built that new building for ridgid

[@ToolReviewZone]

That's awesome brother 👏 🙌 💪 ❤ Thanks for the comment JTS 👊

[@jts4248]

@@ToolReviewZone Man I would love to have meet y'all let me know next time y'all come to South Carolina

[@ToolReviewZone]

Absolutely brother. I'm sure we will head down again...I'll post the info when we do 👊

[@jts4248]

@@ToolReviewZone Awesome

[@nycenj3974]

I like both of you guys!

[@ToolReviewZone]

Thanks brother 👊

[@serrano200384]

Thats hilarious brotha!!!🤣🤣🤣🤣

[@ToolReviewZone]

Thanks goat 👊👊👊

[@TheOne1969]

As per Google search: Techtronic Industries Co Ltd (TTI) As it turns out, TTI owns Milwaukee Tool and a host of other power tool companies. It also licenses the RIDGID* and RYOBI names for cordless power tools (Emerson owns RIDGID).

[@ziggybombers1563]

Ok ok I’ve subscribed now please just give the man some food. Great video bud 👍.

[@ToolReviewZone]

Hahahaha, welcome to the channel Ziggy!!!!!

[@PowerToolsForBeginners]

LOL! great video! your Vince impressions are getting funnier and funier! although Vince is a really cool guy!

[@ToolReviewZone]

Hahaha, thanks brother 🤣👊

[@chaddoyle6911]

I’m a woodworker and I wish Ridgid had two cordless tools that are glaringly missing from their line up. A 23Ga pin nailer and a stapler. Especially the stapler which is is obviously a more universal tool that Milwaukee already has developed. There is one tool by Ridgid that is super useful but needs design improvement and that’s their palm router. Jonathan Katz Moses covered the issues in his palm router video and basically the router doesn’t stand up to other products in this category.

[@AlexRides808]

I wish they had a track saw.

[@SocialistDistancing]

Being a ridgid guy,(but not rigid regarding other platforms), I'm very interested to see what's new from ridgid. I'm waiting to see what's new, before I commit to any new purchases.

[@ToolReviewZone]

They have more coming bro

[@bryanG4020]

What you failed to do when switching saws was the saws needed to switch ends of the board also!

[@paulcarrjr5536]

ove ridgid great video. But leave philly out of it haha. My now i am second guessing buying the the older one handed sawzall thats on its way. But i have the brushed 6 1/2" saw and i love it. With the 4ah battery its kicks ass. Keep up the videos. When is the one handed sawzall coming out and should i return the one on its way now?

[@ToolReviewZone]

What's up Paul! I have the octane as well, and it's not a bad saw. I would probably keep it to be honest as it works good. I believe this version comes out in December if I remember correctly

[@paulcarrjr5536]

@@ToolReviewZone Thank you. Just going to be cuting small trees up to burn. Its on sale with a 4ah battery for $132. Keep the videos coming. Great job

[@baseballdude8491]

The Octane brushless planer, brushless/cordless propane heater, and hand held inflator are really good tools and better than the others in industry Rigid doesn't do everything well but they do have some good tools Metabo HPT is my latest go to over the last few years replacing some.of my Makita and Milwaukee tools

[@ToolReviewZone]

Thanks for the comment Dude 👊

[@daviddolezal1921]

LOL I knew Vince had done some major editing on his video to show only the good parts. I am a fan of the Rigid line. Can’t beat their vacs.

[@ToolReviewZone]

Hahahahaha, he is such a monster David! 🤣👊👊

[@tomwinkle5536]

Does Rigid make an air pump to pump up tires?

[@ToolReviewZone]

Not in their lineup now I don't believe. Ryobi makes one, but that doesn't help someone in the RIDGID line I suppose

[@tomwinkle5536]

@@ToolReviewZone thanks, I got rid of ryobi stuff years ago. I got tired of wiggling batteries around to get them to charge.

[@wronggucci3288]

Is the filly cheesesteak code for Milwaukee?

[@ToolReviewZone]

Na, he really wanted that cheesesteak 🤣

[@blainflake9835]

5” cut bandsaw. I’ve been rough on the small one and it’s held up surprisingly well

[@pawnstor]

I wonder when any of the power tool lines will come out with a battery powered car jump starter 😏

[@jeffwoodruff4568]

Hoping rigid will see this. I am a homeowner and Ryobi user. I recently had issues with Ryobi batteries so I decided to make a switch to Rigid even replacing tools that were nearly new from Ryobi rather thsn mess with two battery types. Huge part of my decision was the lifetime service on tools and batteries!!! and that the oerformance is very good. The only down side is that the tool line is much narrower. I'd like to see an 18v air compressor, power washer, and other useful tools. My wife and I bought an rv so cordless tools are essential to maintain it while on the move. MORE TOOLS PLEASE!!!!!

[@htownblue11]

Hahahahha. You and VCG are my favorites man. Make love not war or whatever whatever……..hahahaha. Well done as always man.

[@ToolReviewZone]

Hahahaha, I know what you mean TJ 🤣🤣🤣🤣

[@CrashPro1]

I wish they'd come out with more innovative products like Ryobi. Like the mini belt sander, and so many other unique tools no one else offers. A quality cordless great gun would be really convenient but the current Ryobi one doesn't cut it.

[@ToolReviewZone]

I think they will be coming out with them down the road. Seems like they are trying to get readjusted, but definitely see those tools being put on the list 👊

[@philricotta]

Looking forward to an 18 Gauge Brad STAPLER. The air powered units do both nails and staples. Wish the Battery powered units would do both as well.

[@zzmalone6720]

The demo’s were great. If you are saying you are impressed, I believe it! Looks like they were running the Milwaukee Ax blades on the reciprocating saws. Awesome video, hilarious! 🤣

[@ToolReviewZone]

Definitely the Milwaukee blades zz. I'll tell ya brother, I left there happy with what I seen. They are heading in the right direction 👏

[@reddbeard2030]

You was down Sous? Let me know when you come down one more State. Atlanta Baby! Hope to see you soon! Smeeshed!

[@ToolReviewZone]

I was there a few years ago, but will definitely give you a heads up the next trip there brother

[@Tigerxx89]

I mean flip that board around and see who cuts faster it’s definitely tougher to cut on the left Vinces right. So that test wasn’t to fair, but those tools look great might get a couple of them myself.

[@veganmarine8853]

Ridgid should update their 12v drill, add modes to the 12v impact, make a 12 volt dremel style rotary tool, make a battery operated table saw, battery operated miter saw. thank you.

[@ToolReviewZone]

Wow, a lot of people really wanting more 12v. Hope Ridgid is listening

[@michealadams1206]

Fun & informative video! 😉 And I'm going to save the day & rush over to your 'best buds' Vinny a Philly cheese steak before he drops dead from the hangries! 😝

[@luisillo1987]

I just stumbled onto your channel, honestly didn't like the mental break downs at first. Now it's the part of the video that I look forward to. Hilarious

[@ToolReviewZone]

Lol 🤣👊

[@JoeZasada]

LOL the cheese steak... Awesome way to pole at Vince

[@ToolReviewZone]

Hehehe

[@jamallaidley4718]

Pretty Cool Clint, looks like Ridgid is stepping up to the task. The commentary is Hilarious 😂🤣😂

[@ToolReviewZone]

Hahaha, thanks brother 👊