Recliner Workstation Design with Hbada E3 Ergonomic Office Chair

[@ToolsElectroDIY]

Hbada E3 on Amazon amzn.to/4c2LsrF Whole setup list: amzn.to/3Vive8n Update: 15% off another chair + mini desk newtralchair.com/discount/TOOLSELECTRODIY?ref=suupmvia Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8 (affiliate links)

[@webgpu]

only thing missing in this chair is a hole in the seat and a funnel

[@pawel7318]

I designed a 3D printed bracket that allows you to mount the tabletop. Search on Thangs for "tabletop bracket for Hbada E3". Enjoy

[@pawel7318]

On Thangs you will find my tabletop bracket for 3d printing. I can't post the link here but you will easily find it by searching for "hbada tabletop bracket".

[@DBisAltair]

Finally someone has done this. Ive been fantasizing about doing something very similar with my office chair for years. Very simple but clever use of the arm rests as the foundation for the desk and with the quick detach magnetic cables connected to a battery bank? Thats genius.

[@ToolsElectroDIY]

Thanks! I've been wanting to do this for years too :D Stay tuned for more interesting ideas.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@blizzardstechzone2700]

Thank you sir For the Link ❤ I don't want loose any video of you 🔥❣️​@@ToolsElectroDIY

[@noname93837]

Reminds me of when I was a toddler, I used to use one of those to eat.

[@ToolsElectroDIY]

good old days.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@webgpu]

i prefer using a fork to eat. It is lighter.

[@giosanchez90]

This man is locked tf in

[@ToolsElectroDIY]

Why

[@InternalErrorX]

@@ToolsElectroDIYLocked in is like a meme which means very focused or serious, but in this usage of his comment, your gear is literally locked in to the desk. Great joke 😂

[@ToolsElectroDIY]

@@InternalErrorX Nice one, thanks!

[@ToolsElectroDIY]

@@InternalErrorX Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@ToolsElectroDIY]

No longer locked in. Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@Tech-heartsong]

I like how sturdy it looks. As a designer, I have a lot of fine detail to do with my mouse and trackpad. It's hard finding a setup with a tray that doesn’t wobble at all.

[@ToolsElectroDIY]

My 2nd design is kzbin.info/www/bejne/Z6K6h5eCmryila8

[@Juju_Vidya]

This is amazing. I would so have gone for this. A few months ago, I had to pack up my studio and temporarily move back in with my parents. I put my office chair in storage and only brought a wooden bar stool (for its height) with me because it fitted my makeshift desk, a wooden workbench on wheels. Sitting day in and day out with no backrest somehow strengthened my spine, and now it feels so normal I would never go back to sitting on an office chair again. Super cool project though 🤩

[@ToolsElectroDIY]

Thanks, see my 2nd design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@HouweHabbe]

bro i laughed so hard. this is awesome. This is exactly something i was looking for. The mesh on the bottom of the chair to reduce the heat in the summer. The arm rests to relieve tension when typing. The different positions you can bend your feet in. And the desk ofcourse. Some fair points that you stated for the arm rests, they might be a bit too short. Ideally i want to use a Keychron Q11 split keyboard in front of the laptop. This is almost perfect !! So i should make the desk a bit better i guess. I love it, thanks for sharing bro ! This really made my day.

[@ToolsElectroDIY]

Thanks, 2nd design is kzbin.info/www/bejne/Z6K6h5eCmryila8

[@GEEKcron]

Amazing setup. A few weeks ago I purchased this chair and had been fantasizing with a similar setup after checking out how comfortable it is while reclined. Thank you for the ideas and the Amazon list!

[@ToolsElectroDIY]

Glad you like it!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@i3looi2]

I clicked. I saw first 5seconds. I pressed like. I left this comment. Closed video. GOOD JOB! I understood everything I needed to understand in 5seconds.

[@ToolsElectroDIY]

Glad it helped!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@cristianinujazznight3044]

My friend, that is my dream. Coding in C++, Game dev, some anime, Jazz, and that setup, thats the dream :D

[@ToolsElectroDIY]

Please watch my second design: 2nd Recliner Workstation Design with Sihoo Doro S100 Ergonomic Office Chair kzbin.info/www/bejne/Z6K6h5eCmryila8

[@superwebsitehero7261]

Thank You so much for making this video! I LOVE the Minimal Setup! You gave me ideas now! 💖💖💖

[@ToolsElectroDIY]

Please also watch 2nd Recliner Workstation Design with Sihoo Doro S100 Ergonomic Office Chair kzbin.info/www/bejne/Z6K6h5eCmryila8

[@sharoncoote7424]

It's great. Well done. You could take it to a tech exhibition so people can try it out.

[@ToolsElectroDIY]

Good idea!

[@computer__eyez]

Brilliant! I can’t build that desk, so I’ll have to search for one, or.. pay to get one made by carpenter. This is perfect for me. Will use your links for mods.

[@ToolsElectroDIY]

Thanks! Also watch my 2nd gen design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@ImakeTanks]

I use a Lazyboy chair with feet up with corsair k63 wired lapboard and cheap DIY computer desk to get the monitors in the correct position over the Lazyboy chair.

[@ToolsElectroDIY]

My end design is here kzbin.info/www/bejne/Z6K6h5eCmryila8

[@gumbi4630]

My dream setup! The magnet idea is perfect I hope this inspires more similar chair designs. Only thing I would personally like is the table to be a swivel

[@ToolsElectroDIY]

Thanks, the swivel design will probably be in the next version, which is obviously more difficult to build.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@aclaylambisabirdman6324]

Oh wow I might actually have to try this myself

[@ToolsElectroDIY]

Sure! Before you do, please watch my 2nd gen design here kzbin.info/www/bejne/Z6K6h5eCmryila8

[@GeeGnebAb]

one word: genius

[@ToolsElectroDIY]

Thank you. I'm designing the 2nd gen recliner workstation. See latest updates on my Instagram page, or KZbin Shorts.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@jipjoi4731]

Home Office at its finest

[@ToolsElectroDIY]

Thanks, pls also watch the 2nd design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@omarsaad361]

woooow!, i'm watching while feeling my neck pain during studying

[@ToolsElectroDIY]

really?

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@akak-dw2cm]

Seeing my dream come true 😂 great work

[@ToolsElectroDIY]

Thanks 😅 you can do it too.

[@DIYtechie]

Cool project! Clever simple solution.

[@ToolsElectroDIY]

Thanks for your kind comment!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@mccg4337]

I have a very similar setup ... but I do it at my desk.. I have a costco gaming chair and put a round ottoman with storage at the feet for support.... not complicated setup needed.

[@ToolsElectroDIY]

2nd gen design here, please watch kzbin.info/www/bejne/Z6K6h5eCmryila8

[@mbk1251]

I'm tempted because I've got the chair already and it would keep seated & move to any room indoor and also onto the patio area hmm

[@ToolsElectroDIY]

I'm designing the 2nd gen recliner workstation. See latest updates on my Instagram page, or KZbin Shorts.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@darthslackus499]

I totally need to do this!

[@ToolsElectroDIY]

Don't do it until you watch the 2nd gen design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@darthslackus499]

@@ToolsElectroDIY Wow. Such a quick response! Thank you, good sir! I live in a small RV so I will have to consider both options. Again thank you for sharing your DIY!

[@ToolsElectroDIY]

@@darthslackus499 3rd design coming soon, stay tuned :)

[@darthslackus499]

@@ToolsElectroDIY Will do!

[@gaabora]

Yes, this is what I needed.

[@ToolsElectroDIY]

Thanks you can also watch my 2nd design here kzbin.info/www/bejne/Z6K6h5eCmryila8

[@gaabora]

@@ToolsElectroDIYoh man, you’re awesome 👏

[@haxguy0]

How cool! This is genius

[@ToolsElectroDIY]

Thanks! The 2nd design is here kzbin.info/www/bejne/Z6K6h5eCmryila8

[@Дима-й8в7ы]

Решение эксперементальное. Осталось выяснить для каких дел, игр, отдыха подойдёт такое кресло

[@ToolsElectroDIY]

See the 2nd design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@oleg-s5s]

А теперь налейте себе кофе и попробуйте поработать за этим столиком

[@Дима-й8в7ы]

​@@oleg-s5s я художник фантазий, практиковал чтение на природе, на пляжах... И на стуле это делать комфортно.

[@cyberlord64]

Not much of a fan of the desk module, but the chair... This chair is what I have been looking for!

[@ToolsElectroDIY]

glad you like it, link in description. also watch my 2nd design.

[@homecinematech]

Great consept to work long time .Still human beings have to move every 30 minutes ideally. This will help a lot. Wish you the best for you and your channel

[@ToolsElectroDIY]

Thanks, you too!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@varshaiyer9395]

You have my respect and envy. Amazing vision and implementation. That chair is unique and thoughtfully designed. If I had a setup like this, I would be happy to work everyday xD. May I know what is that 3 sided wall socket adapter?

[@ToolsElectroDIY]

Thanks, also watch the 2nd design kzbin.info/www/bejne/Z6K6h5eCmryila8 I'm not sure I understand "3 sided wall socket adapter?" could you send me the timestamp in the video where you saw it?

[@varshaiyer9395]

​​@@ToolsElectroDIY I mean those sockets on the wall where the floor lamp is connected to :) 12:19

[@iPEMiC.]

Genius DIY❤❤❤

[@ToolsElectroDIY]

My 2nd design is here kzbin.info/www/bejne/Z6K6h5eCmryila8

[@johnconner4695]

Dude that's so awesome

[@ToolsElectroDIY]

See the 2nd design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@altercinema4311]

Really well done! A desk chair is the way to go. That chair looks so flimsy though. Each adjustable click makes me think it's gonna break.

[@ToolsElectroDIY]

Watch durability test: kzbin.info9NwJBc8BK_g?feature=share

[@NayokeHenji]

This is super cool and has inspired me to make a custom desk myself, thank you

[@ToolsElectroDIY]

Please also watch the 2nd design before you build one kzbin.info/www/bejne/Z6K6h5eCmryila8

[@SuperbD2009]

This is nice !

[@ToolsElectroDIY]

Thanks! Check my latest video for new ideas!

[@jamesdim]

This is exactly what I need!

[@ToolsElectroDIY]

Link in video description :)

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@BjornWiese]

My new workstation! I’ll be soooo productive. After 10 minutes: zzZZZzzZzZzzzz

[@ToolsElectroDIY]

The 2nd gen design is here kzbin.info/www/bejne/Z6K6h5eCmryila8

[@YassineJ]

What came to my mind when I saw the thumbnail of the video, before even watching it, is the GIF "shut up and take my money", just like the person whose message we see in 0:30

[@ToolsElectroDIY]

Yes, haha thanks!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@AINMEisONE]

Good Job! It looks awesome!

[@ToolsElectroDIY]

Thanks!

[@AINMEisONE]

@@ToolsElectroDIY here can I contact you? I am trying to find your contact. I dont want to give it away, except to you! its related but you can be the boss of it. C-Chair

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@omerkaya545]

My girlfriend has rheumatoid arthritis and she cannot use Laptop the traditional way. This could be a life changing invention.

[@ToolsElectroDIY]

good to know, also watch my 2nd design!

[@ricardoarchangel28]

There was something like this done by Herman Miller but it was a desk called Envelope desk and the famous embody chair designed for it. You could recline and pull the desk toward you

[@ToolsElectroDIY]

Good to know. Please watch my 2nd design here kzbin.info/www/bejne/Z6K6h5eCmryila8

[@oranpyre3932]

WE ARE COMING UP ON SOME WALL-E SHIIIIEEET

[@ToolsElectroDIY]

cool check my 2nd design

[@Xyz12391]

You are a genius!

[@ToolsElectroDIY]

Thanks. Check out the latest video update: kzbin.infoqLCI9_5S7Xk

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@iamstephenjohnson]

The Wall E chair has arrived

[@ToolsElectroDIY]

2nd design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@alokitpathik811]

you can install some battery in the chair and a wire will connect to the main miny desk, saving some more room from the miny desk.

[@ToolsElectroDIY]

Good idea. More integration will be dying in the future. Stay tuned.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@jissanhuq3792]

I recently had a herniated disc in my neck that causes severe nerve damage. Just got that disc replaced. During that time and even now i wish i had this setup. I wish it was all made as a kit vs separate parts. I might start with the chair… any reason you picked that one specifically?

[@ToolsElectroDIY]

This video is sponsored by Hbada (I mentioned it in the video)

[@waynesandoval4493]

He also stated that this was only viable due to the style of the chair as well…arm rests move w motion of the backrest

[@ToolsElectroDIY]

@@waynesandoval4493 that’s right if you can find any other chair that has arms move with the back support, the same design applies.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@flame6327]

Its cool that you managed to make this, am curious what's the advantage's vs an height adjustable desk

[@ToolsElectroDIY]

I use standing desk too. This one is more relaxing.

[@frankenstein3163]

Love it. Did you think about using a electronic magnet that engages wen you contact your hand on 2 prongs mouse or desk. I wanted to do this same thing but I'm to tall for every chair in existence :( PS. I have not tried chairs that cost more than 1k. pps. that mouse u have is a good option but I like using my 14+ buttion mouse('s)

[@ToolsElectroDIY]

Cool idea!

[@blizzardstechzone2700]

Thank you 👍🏻

[@ToolsElectroDIY]

My pleasure

[@andrewklukas3633]

If sitting is the new smoking, this is even better

[@ToolsElectroDIY]

See my 2nd design here kzbin.info/www/bejne/Z6K6h5eCmryila8

[@zome59]

ver nice, but why lights above the display?

[@ToolsElectroDIY]

It's a review unit from BenQ. I'm testing it too.

[@Tech-heartsong]

I'm looking to buy a new chair that reclines. My back needs a lot of support and I work 8+ hours as a designer. Which chair and desk do you recommend for being the most comfortable most ergonomic for long hours?

[@ToolsElectroDIY]

This chair I'm featuring is great! But expensive...

[@Tech-heartsong]

@ToolsElectroDIY thanks, I got the Newtral Magic model with full back coverage and footrest. I love it. I use the tray for wireless keyboard, wireless trackpad, and Logitech mouse. I can recline while viewing the large monitor on my regular electric standing desk.

[@ajay_sn]

Can you share how you made the wooden table for laptop 💻 ? Would be really helpful on the measurements !

[@ToolsElectroDIY]

It’s a recycled piece of door

[@ajay_sn]

@@ToolsElectroDIY 🤗

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@nikolaus-lukasthomas6288]

Please share all the dimensions of the desk.

[@ToolsElectroDIY]

34" x 13.5"

[@jissanhuq3792]

It would be perfect if the table top swiveled away to get out vs off like medical or tv chairs have. With my injury i would not want to lift a table onto a chair

[@ToolsElectroDIY]

@@jissanhuq3792 that would be the 2nd Gen.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@tasnimmaya-s2s]

The perfect blend of style and comfort! 😍 This office chair not only looks sleek but also offers great back support. Add a few accents from home kit decor to elevate your office vibe! 💪🖥

[@ToolsElectroDIY]

I’m glad you like it!

[@JohnDavis-eb4yq]

I use my recliner, wireless keyboard and mouse, super easy. With my mounted TV on the wall

[@ToolsElectroDIY]

Good to know

[@i3looi2]

You need to add motorized wheels for chair, so you can go to kitchen get a beer w/o getting off. McDonalds DriveThrough is also an option.

[@ToolsElectroDIY]

thanks for your feedback

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@periwinkletinkle7371]

Leg knee support needs to be bended so the knee will not stay too long straightened. Monitor should be higher and in center so when it is fully reclined eyes to monitor is aligned and no need to bend down the neck or head.

[@ToolsElectroDIY]

Thank you. I'm designing the 2nd gen recliner workstation. See latest updates on my Instagram page, or KZbin Shorts.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@felipe4181]

Having back problems, it looks like a good relief for the back…or am I wrong?

[@ToolsElectroDIY]

You are correct.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@TheUltimate-tg9ge]

listen guys. You dont need the table to "recline with the chair". I am using a simple gaming chair with a recline funktion like this for years. recline your chair und get close to the "normal" desk. I use monitor arms to bring the monitors closer and adjust the angle. Rest your arms on the desk. as simple as that just try it

[@ToolsElectroDIY]

Yes, I already created 2 short videos on that topic a few weeks ago.. See kzbin.infoc5OlG2HHNeY?feature=share kzbin.infoNK4TIfadSiY?feature=share

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@vastligvind]

dam thats perfect

[@ToolsElectroDIY]

Thanks! The next version will be perfect. Please stay tuned.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@QHawk7]

*WALL-E comes to mind*

[@ToolsElectroDIY]

sure

[@slaynnyt8130]

Cool concept but i'll stick with my hammock + support for mouse and 55 tv as monitor its even more comfy trust me, just be careful against falling asleep on it lol

[@ToolsElectroDIY]

Watch my 2nd design: kzbin.info/www/bejne/Z6K6h5eCmryila8

[@bahramgh6016]

Awesome

[@ToolsElectroDIY]

Thanks, 2nd design is kzbin.info/www/bejne/Z6K6h5eCmryila8

[@AX-fx7ng]

Look into trackballs ‘ trackpads track point for pointing device. Do share open source your diy.

[@ToolsElectroDIY]

Good idea

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@knoptop]

Fun stuff!

[@ToolsElectroDIY]

Haha yes!

[@notorious.nip.888]

You should put a patent on this because someone is gonna to steal your idea and mass produce it, or you can mass produce by designing an adjustable bottom holder to snap onto the arm chair rest

[@ToolsElectroDIY]

Thanks I may work on it.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@AtomScienceChannel]

This is amazing!

[@ToolsElectroDIY]

Thank you!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@Jonathan2x6]

Thats awesome 👍

[@ToolsElectroDIY]

Thanks 👍 The 2nd design is available here kzbin.info/www/bejne/Z6K6h5eCmryila8

[@beegee8930]

I have always thought this is the future of workstations. The modern office needs an ergo redesign.

[@ToolsElectroDIY]

2nd gen design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@ukcomputergroup]

😲 I need this!

[@ToolsElectroDIY]

sure. The 2nd gen design is also available on my YT channel.

[@AP-hn8wd]

Reminds me of the Pixar movie, Wall-E

[@ToolsElectroDIY]

sounds good

[@cgescape]

ive been trying this too from a while.. but only at a personal level.. the thing is i have a workstation.. and i put it at back.. and 2x 32" screens, but my chair was steelcase.. i could share my design with habata, but disclaimer.. my product is for professional and professionally finished.. sub for mre

[@ToolsElectroDIY]

good to know, please post a video, thanks!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@romellbroom2216]

Awesome project, Im in love with your work :) Could you please tell me which is the aprox measurement/ height from the sitting area to the top of the arme rests? Because I would need them to go under the desk to work comfortably with my chest near the desk side. 😅

[@ToolsElectroDIY]

The chair size info can be found on the product page, link in video description, thanks for your support!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@seattledude2022]

genius

[@ToolsElectroDIY]

Thank you

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@nice2care]

Great idea! Thanks for listing all the part. By the way, where did you buy the desk from?

[@ToolsElectroDIY]

It’s a recycled repurposed furniture door

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@minhduc.finance]

A pretty good idea

[@ToolsElectroDIY]

Thanks. Please also watch the 2nd design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@MrHitCrit123]

Hey, very nice video. But honest and just curious Question: Did you buy it or did you got the char sponsored?

[@ToolsElectroDIY]

Sponsored. Not sure if you washed my full video I thought I said that the beginning it was sponsored.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@MuhammadAli-xz2md]

Where can I find the wood desk? Or you make it by yourself?

[@ToolsElectroDIY]

Repurposed old door

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@jeannetteluna1744]

This is great!

[@ToolsElectroDIY]

Thank you

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@yaohu1857]

Comfortable👍

[@ToolsElectroDIY]

Absolutely

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@samuelcamero6618]

very neat.

[@ToolsElectroDIY]

Thanks. See the 2nd design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@JMaxwell1000]

Does this recliner go into a zero gravity position? It looks VERY promising.

[@ToolsElectroDIY]

not entirely flat.

[@sauleon_070]

A genius 🔥🔥🔥🔥

[@ToolsElectroDIY]

Thank you. Just curious, are you coming from Instagram?

[@sauleon_070]

Yes my friend 😁 I come from Insta

[@ToolsElectroDIY]

@@sauleon_070 Amazing my video worked, thanks for letting me know!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@MatiasBerrueta]

love u! I will do it !

[@ToolsElectroDIY]

Don't do it before you watch my 2nd Gen design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@HavocAlive]

As someone with Ehlers Danlos Syndrome, this could be life changing

[@ToolsElectroDIY]

Good to know, thanks for watching

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@elgs1980]

For a second, I thought it was Tim Cook speaking.

[@ToolsElectroDIY]

2nd design kzbin.info/www/bejne/Z6K6h5eCmryila8

[@Lazymartinez]

Nah I would actually like more info on building the board (any links?) and the type of four 9-inch pieces.

[@ToolsElectroDIY]

Scrap wood recycled furniture door LOL

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@muhammedendesutku2714]

Genius

[@ToolsElectroDIY]

Thanks

[@MrErick1160]

Where can I buy this

[@ToolsElectroDIY]

Links in description

[@TuneTuber]

What are those sliders called you use to hold the power bank?

[@ToolsElectroDIY]

It is amzn.to/4531jED (affiliate link, Power Strip Holder, 5 Pack Self Adhesive Power Strip Holder)

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@Carlos283527]

Rollerblade wheels ftw

[@ToolsElectroDIY]

I agree.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@john8trades]

What’s the dimensions of the desk? Or perhaps of the original door

[@ToolsElectroDIY]

34" x 13.5" -- but it doesn't matter, you can cut it to any size you want, as long as it is stable.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@slareza71]

I defies the purpose of your sit-stand desk.

[@ToolsElectroDIY]

ok

[@Faisalx505]

Great video. what's the width of the mount below desk which you can place it on the arms of chairs?

[@ToolsElectroDIY]

The width does not matter. Don't measure, just fit them and put on screws. And you can adjust the tightness / friction easily, which is very hard to do by measuring.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@Biery]

Genious 😀

[@ToolsElectroDIY]

Thanks

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@sektor7_studios]

Perfect 👌

[@ToolsElectroDIY]

Thanks!

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@hungothanh4913]

look like a desk for the disable. Really, if you are not disable or too weak, you do not need recliner. But for those who do, this is just the thing they need to keep working.

[@ToolsElectroDIY]

How did you jump to that conclusion?

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@TheNightShirt]

As much as i love the idea, i think you didn't look at the worst designed tool that we use everyday: the keyboard. There are many new ergonomic keyboard designs. It's kinda hard to get into split keyboards, choosing how many keys you need, finding a way to learn the layout, but man it's worth it. You should look into it.

[@ToolsElectroDIY]

Yes I have tons of ergo keyboards and mouses from ProtoArc. I may do a review soon. Stay tuned.

[@ToolsElectroDIY]

Watch the 2nd Gen design video kzbin.info/www/bejne/Z6K6h5eCmryila8

[@yusufsoatov9846]

How much?

[@ToolsElectroDIY]

Link in description