Top 10 Best Purchases from Harbor Freight

[@AntonioClaudioMichael]

Interesting selection defenitly a unique video Compared to the rest of the tubes

[@ToolswithSoAlz]

Different is what we do here. Lol!

[@duanefry7977]

@@ToolswithSoAlz you can do that and

[@duanefry7977]

Llllrlllkp

[@ToolswithSoAlz]

I am sponsored by my wallet

[@AntonioClaudioMichael]

@@ToolswithSoAlz I am sponsored by my own wallet also Lmfao 😂

[@theperfectpaintertoolreview]

My buddy bought 2 3 tier rolling carts, took off the wheels and put them in his work van for $100. Saved several hundred bucks on getting a company to install shelves

[@ToolswithSoAlz]

Smart man right there

[@CCoburn3]

Harbor Freight has pretty good stuff. And as you say, pretty good is good enough for 98% of the things I need to do as a homeowner. Why should I pay more for better tools when I will never need the extra features? Great video.

[@ToolswithSoAlz]

Thank you

[@EfieldHfield_377]

Best description ive ever herd about Harbor freight tools. Pretty Good. And you right for most home owners its good enough.

[@bradgates4230]

Those hammer drills are great for 80% of us out there. I've pulled it out of my tool box after 6 months with no battery drain. Highly recommend

[@ToolswithSoAlz]

With Harbor Freight you can usually find good value and that's what their power tools represent for a lot of people.

[@shanhannum9999]

i use the harbor freight 1/4 sockets everyday on small engines,and have never had any problems yet,they are my go to set

[@ToolswithSoAlz]

That's awesome

[@rld1278]

I think the best thing I've bought so far is the Bauer 20v chainsaw. I don't cut down anything big but to trim limbs and cut down volunteer trees that got too big it's a great homeowner tool and saves me a lot of time from using a hand saw. The Bauer corded recip saw with a wood blade is a great help too, especially roots.

[@ToolswithSoAlz]

Thanks for sharing your experience

[@kirbyspencer538]

Agreed on that red cart. Nice buy. I stole some space from the bottom shelf, which I wasn't planning on using much, by pairing the top hole of the middle shelf with the lower hole in the frame, then drilling new holes for the lower bolts. It was purchased mainly to haul yard stuff from the driveway to the backyard and groceries from the truck to the kitchen but it keeps finding new niches all over in the garage. Might have to get another. I actually covet the same size poly cart, but you can buy two of these for less than one of those. The two shelf version of this cart is not stable enough and racks terribly, you'll notice that in store if you wiggle it.

[@ToolswithSoAlz]

Understandable, on the two shelf cart. I have it and my wife uses it in the kitchen, instead of an island. It does well enough for her. I was thinking of comparing it to the Hyper Tough @Wal-Mart as they are priced about the same. I think it would be interesting.

[@rickdff62]

I have an old craftsman toolbox that fits perfectly on the top shelf of that tool cart so I use it as a small mobile tool chest. Works awesome.

[@ToolswithSoAlz]

That's a great idea. Mine is used as a mobile studio so I like the idea of repurposing it.

[@handymanhoney-do6881]

I almost bought that same router. I very fortunately checked FB Marketplace and picked up a nice DeWalt plunge router, hardly used, for $60. MSRP $199. Nice to hear yours is a good choice too.

[@ToolswithSoAlz]

I got their floor model and they gave me extra off. I think I got it for about what you paid

[@ianmccoy1999]

Ive got hydraulic shop press from harbor freight, engine lift, jack stands, floor jack, transmission jacks and these are all great items for use in a home garage. Im not so sure how they would hold up industrial settings but they work very well for me. I also recommend the us general tool boxes and carts

[@55chevytruck]

I am still using my HF impact wrenches for 35 years and not one has broken. If you are breaking tools it means you are not using them for what they were intended for.

[@ToolswithSoAlz]

Yeah, what do I know? I mean I have been in the trades for years so I probably have no idea how to use tools

[@55chevytruck]

@@ToolswithSoAlz I was not referring to you. I just watch a vid where people were bad mouthing HF quality.

[@ToolswithSoAlz]

@Warren Wimmer sorry about that. You can get some quality tools at Harbor Freight

[@55chevytruck]

@@ToolswithSoAlz I should have been more clear. I have a lot of HF and some have been great and a few I regretted buying but overall happy. Another point it you buy all high quality like Snap on you wont have any money for any thing else!

[@ToolswithSoAlz]

@@55chevytruck no worries. It's all water under the bridge

[@mattyounis5636]

I am loving all the icon stuff

[@ToolswithSoAlz]

That's awesome!

[@petermorrison106]

At the 9:42 mark, you said, If there's one thing you should buy from the "Home Depot" it's this. I thought this was a Harbor freight Video. ???

[@ToolswithSoAlz]

My bad

[@Dahna_]

oh that Hercules drill is giving Dewalt a run for their money!

[@CriticalThinker1967]

In Australia Aldi sells Bauer. I might pop into Aldi from time to time and look at their tools now

[@ToolswithSoAlz]

Cool

[@crazysamz]

Nice video, saw a lot of tools I wouldn’t think to look into at HF

[@ToolswithSoAlz]

Thank you

[@AdMan-The-LabRat]

@8:08 "Nice Crocs, shame about your face" Had to give this video a "Very-very good Enough" specifically for your Intellectual honesty and Industrial Integrity, thank you. (Credit "The Cramps, Nice legs, shame about her face".

[@ToolswithSoAlz]

Lol

[@AntonioClaudioMichael]

Great video And congratulations on hitting the 200 sub mark

[@ToolswithSoAlz]

Thank you very much

[@AntonioClaudioMichael]

@@ToolswithSoAlz you are very welcome sir

[@sl5311]

My drill with the "Jacobsen chuck" had the chuck start to wobble on it.

[@ToolswithSoAlz]

That's a pretty common issue with those chucks. It's unfortunate but almost all of the manufacturers use that or one similar

[@bmug-u2g]

I’ve got 5 kids. As each on purchased their first car I got them a Harbor Freight tool set - mostly so they would leave mine alone. With that tool set they had the instructions to, as they broke, to purchase a better quality tool. Why, if they used it enough to break it that was a tool they were using.

[@ToolswithSoAlz]

Cool

[@AntonioClaudioMichael]

1 of the top ten items for me is The warrior Electric Cutter it's amazing for cutting that pesky plastic clam shells and boxes and more

[@ToolswithSoAlz]

I picked one up for the wife at Christmas.

[@AntonioClaudioMichael]

@@ToolswithSoAlz I use it for unboxings and stuff like that on the channel makes getting batteries out of clam shells so much easier no more plastic or paper cuts

[@ToolswithSoAlz]

You've seen what I do.

[@AntonioClaudioMichael]

@@ToolswithSoAlz true dat

[@AntonioClaudioMichael]

@@ToolswithSoAlz hulk smash activated lmfao kidding 🤣😆

[@eloyheras9235]

Sand Blaster box, what do you all think about ????

[@ToolswithSoAlz]

It's probably good enough to get the job done.

[@snoopu2601]

I don't care what anyone says about Horbar Frieght tool's when something brakes they will trade it in no questions asked. Try that with snap on truck or home depot. I was given a saws all for Christmas years ago to cut metal wood and just about everything else. Never burned out the whole time I had it. The only thing I didn't like about it the aline wrench to change the blade . The new one need no wrench just lift up pull the switch quick blade change or take the blade off for storage.

[@ToolswithSoAlz]

As long as you're happy, it doesn't matter what other people think

[@dorothyguzman9271]

How to reassemble a staple gun

[@Kreacher1974]

Do you think the Ridgid portable inflator is any good

[@ToolswithSoAlz]

I still have and use it

[@nerdymra8252]

I need a good tool cart. I am a Vintage VW junkie....looking for an old Hazet Assistant. 🤓👍

[@ToolswithSoAlz]

If you need a good tool cart then I would suggest the US General from @HarborFreight

[@DougAlesUSA]

Found you in Tool Junkies. Best wishes on your KZbin success.

[@ToolswithSoAlz]

Thank you very much. I hope you stick around and enjoy the content

[@eastrustgaming4361]

My workshop behind my house is a messy clutter..But i know were everything is..But i hate when my wife wants to declutter in the house..then i cant find anything..lol

[@ToolswithSoAlz]

My problem is that my wife keeps throwing things into my little shop and expects me to figure out what to do with it.

[@AntonioClaudioMichael]

Interesting video

[@ToolswithSoAlz]

I simply hope you like it and were entertained by it. I welcome any criticism you may have and I mean that sincerely.

[@AntonioClaudioMichael]

@@ToolswithSoAlz I would Say Audio Needs to be a Little Louder little hiccup on the first item were it cut out and went straight into the next item little more seamless would help but other then that your doing very well I hope that helps Brother and keep up the great work 💪

[@AntonioClaudioMichael]

@@ToolswithSoAlz and yes I was very entertained

[@ToolswithSoAlz]

@@AntonioClaudioMichael I appreciate that. I'm working to get better at the editing and recently purchased a new mic. I had a cordless mic but it just doesn't work very well.

[@AntonioClaudioMichael]

@@ToolswithSoAlz if you need any help let me know I would be happy to help with the mic message me on instagram

[@blaydedodds8880]

Ayeeee the Crocs

[@ToolswithSoAlz]

Crocs are to a Dad what Nike are to a kid

[@blaydedodds8880]

@@ToolswithSoAlz 😂😂

[@mikeaze423]

Impacts are great

[@ToolswithSoAlz]

The Hercules is pretty good.

[@TomBTerrific]

Should have included price

[@andrethegiant2877]

What's going on in that window behind you?

[@ToolswithSoAlz]

Nothing

[@bayshark7o7]

Thnx bud

[@ToolswithSoAlz]

You're welcome

[@KMF3]

Prices please

[@ToolswithSoAlz]

The video is about a year old

[@happy2meetu34]

Good selection

[@ToolswithSoAlz]

Thank you. Glad you liked it.

[@mirchiboyz]

Harbor Freight Trailer

[@ToolswithSoAlz]

I haven't purchased one but it has to be better than the jack stands

[@WXSEDY]

Maybe it's the Harbor Freight stores I've been to (about 3) but it seems to me that everyone who works there is an a$$hole! Maybe that's their shtick so you think you got a good deal. Then again, maybe it's a CHINESE thing! Personally, I'll stick to Lowes whenever I need to hit a B&M for basic stuff like drills & hand tools. FYI: Lowes sells Craftsman and honors the same warranty you used to get with Sears. Even Home Depot has pretty good stuff like Milwaukee power tools. But for the more specialized stuff, I'll probably check out a few pawn shops or maybe even Amazon before I go back to another Harbor Freight store. But I will admit, I probably will be comparing prices, just not buying anything until the idiots who work there realize who the customer is -- and who keeps them employed.

[@ToolswithSoAlz]

I can't disagree with what you're saying. HF does tend to get employees that are maybe lacking on the motivational scale. However, I did this video because so many people do go there and I wanted to share my opinion on what the best tools to purchase there.

[@Royal_Bloo]

Anybody ever tell you you look like Liam Neeson

[@ToolswithSoAlz]

No, I usually get told I look like Bill Clinton when he was young. I'll take Liam over that

[@Royal_Bloo]

As you should

[@rjmills126]

Haha my man!

[@rjmills126]

Good stuff!

[@ToolswithSoAlz]

@@rjmills126 I hope you liked it

[@ToolswithSoAlz]

@@rjmills126 haven't seen you around. Are you doing well?

[@EricCampbellUAV]

worst list ever

[@ToolswithSoAlz]

Thanks for watching. No refunds

[@andypoe1966]

Is this a joke? So sad and funny

[@ToolswithSoAlz]

I take it you disagree?