Top 10 dIY Generator in the world

[@diyathomevn]

thank you for helping many people have free generators, low cost, but scientists don't know, you have made the laws of physics ineffective, your project must be awarded nobel prize

[@dinunayak2840]

It all project are possible,it is not fake, thanks sir,

[@c0deman057]

That first one looks extremely efficient. Even when spinning very slow, the LED on the powerdrill still glows BRIGHT!

[@rolandogarcia5860]

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

[@ronnieowen1239]

I dont mean to be offtopic but does anyone know of a way to get back into an instagram account? I was dumb forgot my password. I would appreciate any assistance you can offer me

[@jakejonah4283]

@Ronnie Owen Instablaster :)

[@ronnieowen1239]

@Jake Jonah I really appreciate your reply. I found the site thru google and im in the hacking process now. Takes a while so I will get back to you later with my results.

[@kennedy6971]

The first one should have used 2 more nuts and 4 more washers to make the pickup coils adjustable. Cool project. Wish we could see a multi-meter reading both voltage and amps created. But still very well done. Nothing explains what's happening better then hands on examples. Sometimes understanding how the bricks are made makes making the road smoother easier

[@TubaParveen-cd2ys]

At 51:00 in video ( 5 ) you are measuring voltage as shown in multimeter as 63.6 volt DC, where as it produce only AC current ??????? Kindly explain it, as myself is much confused about it .

[@Learnelectronics738]

Very good video thank you

[@electronic7979]

Good ideas 👍

[@dsofficial7553]

terimakasih sudah berbagi ilmu salam dari indonesia ,♥️

[@allstreamerscheat8784]

hes using an 18 volt drill to light a 12 volt car headlight, what a genius! lol

[@abjjones]

Your the one that go me started doing this stuff. Thanks

[@johnholemanjr3738]

The ideas are great, but the music sold me on the clip. No one would admit it, but music is the most attractive form of logic, especially the cadence and rhythm.

[@keithcoltron3171]

Yeh man

[@NTF-zb9wi]

So far, I'm only towards the end of #5; so, some of the others might do it later; but, I do wish that, in addition to showing the increased volts, that they'd also show the mA/amp outputs, as well as run-times. I know that an 18650 battery is 3.7V, with an average of about 2000mA (depends upon the brand); but, showing the above would tell us if the 18650 was just the "jump starter"/"coil exciter" for the 3V motor vs the 3V motor was (very briefly) running the 3V motor. If the former, it would be a nice COP; but, if the latter, only mildly impressive.

[@mazenman5870]

How can DC current come out of a copper coil?

[@emilyhouse9642]

@@mazenman5870 wave a copper coil over a magnet at you'll generate a small amount of current. Put a diode in the proper place and volala, you got DC 💪

[@aleksandrmunos4115]

Felicitaciones‼️. Excelente trabajo‼️. Gracias por tu tiempo y por compartir 👍🏻...Saludos desde #Chile 🇨🇱

[@infoforu3455]

So complicated, but nice. 🤔💪🏼🇮🇩

[@pehgt5099]

Can you kindly show us how to convert ordinary induction motor to permanent magnet generator to power house Thks

[@historyisfake9153]

There are may videos on youtube explaining. I have a few motors I have been saving waiting for the right time.

[@keithcoltron3171]

Have you got a million years to wait?

[@johnlaccohee-joslin4477]

I have just watch this video and come to the conclusion that it would be just as easy to plug the adaptor that came with the phone into the same plug as used to drive the motor, it doesvthe job without having to spend more money buuing bits a peaces to make something.

[@hogsworthhammer9211]

... but that would not be nearly as much fun!

[@GreenPlanet30]

🙂

[@frankwadsworth6478]

I'm just going to try one thing at a time and screw it will just try it all time for fun fun fun

[@savneetsinghrairai6823]

I keep on screwing my generator project until it's practical n effective ....this is how useful products are made try n error but after error reform n

[@abhishekcrazexperiment4838]

kzbin.info/www/bejne/jaO2q5aog5hlipo

[@InstantPayback98]

"This tip is very helpful, especially for beginners like me."

[@wahbetamaujkardigaming3003]

You are mind blowing generator guy

[@pbat118]

What would u say was the largest output from lowest input here?

[@HatulaKing]

Those are some nice mechanical transformers!

[@soburnedout]

INVERTERS

[@hasmukhvpatel4539]

beautiful most of them.nice job.

[@erneztudofia9053]

You mean it?

[@padmavathik701]

My kid got impressed with your channel he wants to try #5 where can we get the dynamo and what magents are those ? Can you please help

[@godell8752]

Did he ever make it? Curious to here if it was successful.

[@ssekajesse5876]

Very good 👍🏽 and teaching video to watch but if at all could list down the materials used for each case

[@Jonbsa003]

Bahot badiya....

[@friscopolis9613]

Tenéis la fuente de producir electricidad en buestras manos y no encontráis su punto débil y es la 3ª parte que unifique todo, por lo demás seguid así vais bien, un saludo desde España ; Albacete

[@TubaParveen-cd2ys]

I got fed up with these only LED lights, What to do about these toys ???????

[@garniful]

lovely magnet and copper games

[@devinmounce1838]

In the second example what is the blue thing plugged into? Because it looks a lot like a power cord. Seems kind of redundant if you ask me.

[@felitasmn3072]

Like it...is very good...Thanks

[@TubaParveen-cd2ys]

I think thicker wires are not available arround your place ?????????

[@Suavache]

Rất tuyệt vời tự tạo máy phát điện

[@enriquealejandrolopezsanma4723]

Its wonderful your work, a big Hug brother Regards from Buenos Aires.

[@grahamturner6119]

Crap

[@Huyeno-sx1dg]

where can you find the iron core ?

[@keithcoltron3171]

In an iron core shop, stupid :-)

[@Huyeno-sx1dg]

@@keithcoltron3171 xd

[@apakahbisaterus726]

great video, planning to build no 4 generator

[@tresornzungu1404]

, 6 ,CV v CV lu, 86ju,8 67buu8hvv8 8b6u86k687768y6868bub 68 Ubuntu 86bj66i8877b788696yv6hbhbj88,6by 6 7 68 68 f686687u88fc88i666688k68ky6 98ivh6uc f686687u88fc88i666688k68ky6 98ivh6ucj c8865lv86tc8, 88uxvvh8y88f6888b8,w 8y

[@chongshenchang9367]

3.7v battery cannot even move 775 motor. But your project is turning that motor like hell... 😂😂😂😂.. Magic or what...??

[@leonelefren4076]

American tech, im proud of what project you do and doing and you have done... i tryed to do what you have projected on your video but it didnt work...can you share to me the secret how to make it works, please? Im your solid subscriber thats why i want to do what you have doing on your project...thank you.

[@davey2k12]

That's the prob they fake and not useable and be noisy lol not to mention you could destroy something's with voltage spikes cus no regulation less ya control motor speed but needs maximum speed to have effect

[@keithcoltron3171]

Hmmmmm SOLID definitely, I feel sorry for you, I.Q. maybe 20----------MAYBE

[@beneditoroberto6973]

Ola amigo quantas voltas vc deu nos parafusos e qual a espessura dos fios

[@petersontupinamba3517]

Em inglês, please!

[@junta-de-ferros5y1677w]

This example is pretty good

[@markrichardson909]

i have tried several times to re-create american tech, only with failure, yes i question everything they build, not one thing has worked, only what you see on these vvideos

[@thenet0120002]

Most of your designs are basically the same. I realise you are showing the principle of power generation but you should show a more useful version which could self generate , just a suggestion .

[@viladefrades3998]

Como se hace para un multímetro regulado en corriente continua "DC" se puede medir esta corriente la cual es ALTERNA ya que lo que sale del conjunto con el rotor magnético solo produce "AC" (Corriente alterna) y con tantos VOLTIOS para no quemar una lámpara que debería estar funcionar a 12 voltios ???????

[@ti3apache1]

Mire bien, está en ACV = Voltios Corriente Alterna. Está correcto como lo hace. Y si usa un cuadro de diodos, puede pasar a directa y usarlo en lo que guste.

[@TubaParveen-cd2ys]

MILLI AMPERES will not solve bigger load issues ??????????

[@joaKimSantos1]

Quando ia carregar o telemóvel estava com 42%, depois de estar a carregar marcava 41%...então ? carrega ou descarrrega?

[@Koperlich.]

kk verdade

[@ablegika]

working. nice!!

[@johnnyvandenelzen2250]

So, I need a powered drill to light up a bulb, that's one expensive light source! Thanks for the video though.

[@Hydrogentruckster]

yes, And In fairness to you Johnny,It did seem Pointless when he could have just plugged directly into a stable AC supply to charge his phone? lol

[@cptrush3671]

number 2. i noticed the phone went from 42 to 41 percent on second shot. so it must not have been putting out much amps.

[@김용재-r8i]

Thanks a lot for your kindness !!

[@spdas5942]

Kindly give the item names and amounts for each video you make . You are really a true inventor !

[@donizetec.mendes921]

OLA AMIGO QUANTAS VOLTA VC FEZ NO PAFUSO

[@quellenathanar]

#3...Was that getting hot? It seems like a lot of juice for 28ga? wire.

[@UNIMPEEDED]

Lmfao, number 2 was powering from the wall socket to spin the magnets, why didn’t he just plug in the adapter to wall socket to charge the phone, omg lol.

[@DmitryMaster]

Тебе показали принцип работы. Крути вал ветром и будет халявная зарядка.

[@masudrana1387]

niec

[@davey2k12]

Makes sense 😂 just waste of wire when can be done from few components and small transformer 🤣🤣 cus it's low amps junk

[@soburnedout]

No dude. These are inverters. They’re small dc motors- look at the wires powering the motor. Anything over a couple amps would turn the wire into a fuse-link. In other words, that shit would heat up and self destruct.

[@deltaservis8540]

@@DmitryMaster q Qw :'

[@cornelvulpe9459]

Mai aveai oleacă...și ajungeau la 380v ...??...

[@jackhandy2165]

I love your work.

[@diyathomevn]

you are very good, i want to make one to light a 1w lep bulb but the power supply to the motor must be 100w cos y=.01 like you do

[@wowpalachannel7344]

Amazing...i want to do it on my own to see how it work

[@keithcoltron3171]

It DOESN'T!!!!!!!!!!!!!!!!!!!

it does work, and you dont need tye wall plugs you can hand turn these they are just to show you without have n to hand turn the drive

[@나무송]

박 ㅂㅈㄷㄱㅅ

[@kanjibhaidesai8893]

Don't 👍🤣

[@nassefyacine]

For the 3rd genérator ,what,s the amps. Please.???

[@keithcoltron3171]

78,000,000,000,000 Amps Be careful :-)

[@kayangel2625]

I do like this one an art

[@carlosdavila4164]

TIENE LOGICA EXCELENTE DESDE COLOMBIA

[@jj4ru]

Great :) 😻😻

[@irveaugustine9230]

glue companies should contact this guy for a sponsorship ...id buy😂😀😂

[@yougeo]

This is smart. more magnets and less wire coils is a much easier way to make a DIY generator!

[@derekpresland4029]

I have to ask. He mentions that he uses 2000 turns of 0.15 mm wire. That means in my world 1000 layers 1000*015 = 150 mm or a diameter of 300 mm. Can some help me out, obviously missing something.

[@paulofernandes221]

A variação de brilho da lâmpada não corresponde à variação de rotação do rotor!

[@neivamoreiramoreira6080]

Mas ele fez isso e precisou de uma furadeira elétrica ligada na tomada p fazer a lampadinha acender. N era melhor ele ligar a lampadinha na parede?

[@bulla8631]

how’s about an example between the N & S I’m not sure about it’s i gust the N is pulled in S is pushed out

[@hanslgurtner3082]

With the number 10, the last generator, you can probably run your household. That's easily 4000 watts out. )))

[@nassimnajjar]

can you make a diy of a bigger ac motor ? the type that can be used on window shutters, sliding doors, etc.

[@tintuc7483]

Nassim Najjar thanks you kzbin.info/www/bejne/i4GrZ6KDn9SXrJY

[@nassimnajjar]

@@tintuc7483 how is that video relevant to my question ?

[@TubaParveen-cd2ys]

20 volt. AC,what to do of such a low values ????????

[@sykeamer88_20]

Did you know that every brushed dc motor is a dc generator not ac

[@emilbobocea1662]

TZzzzzzzzzzzzZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZzzzfFZZZZZZZZZ DAAAA Gfzzzzzz și l

[@emilyhouse9642]

If you gonna comment at least know what the duck you're talking about 🤣

[@davidblakely2627]

it's all about the science of the project

[@5phutchetao553]

I also work on this topic which is quite interesting

[@michaelrevels3572]

Wouldn't it be easier to just run wires from the drill battery to the light bulb.

[@analitycs1303]

...!!!Excellent Jobs..¡¡¡¡...Thanks...

[@ezycreatordiy2252]

Amazing ideas

[@hendriboyketarigan8458]

Weird, the output it's DC, have no bridge diode? Are you sure ?

[@mamengom4446]

Bravo mr

[@horstschwanke4020]

Es ist Prinzipiell richtig wenn die Magnetfeld Linien durch die S0ulen laufen. Fehler: statt der Schrauben muß es Lamellen Blech sein und muss abgewinKelt weiter zum anderem Rotor Lager geführt hat werden, Es müssen beide Spulen Kerne mit Lamellenblech verbunden sein, Aer es gibt niemals freihe Energie. IN JEDE MASCHINE MUSS IMMER MEHR ENERGIE HINEINGESTECKT WERDEN ALS MAN HERAUS BEKOMMT

[@supervisortoquepala9481]

Gracias por enseñarme Dios te bendiga

[@hhemasi9849]

Do you know that Power is the voltage multiply current, so showing just voltage shows what?

[@michaelmeenaghan8559]

Fair point, however putting on a detectives hat, work it out for yourself.

[@TheHotscorpio20]

Wouldn't it be easier just to plug the bulb into the cordless drill.

[@sirajhusain9128]

Copper wire kitne mm ka best hoga high voltage ke liye

[@soburnedout]

People. These are Inverters. Not generators, and ‘transformer’ is too generic a term. Everything has a word that better describes what you’re referring to. Aren’t words fascinating. Say what you mean to say, and people will understand what you mean;)

[@leonelefren4076]

How many turns i have to do to make it runs. What is the computation of every turns...can you share to me the computation ot every turns and equevalent voltage of it to make it runs, please? Thank you american tech.... hoping you will tell me the computation of every project you have done so that i would know how to do everytime i make a project like what you have done...

[@davidsermon72]

Haven't you noticed.. these KZbinrs rarely tell the information needed.. it's when their information is not shared. You know it's a sham

[@Huyeno-sx1dg]

American Tech is best channel

[@JanFilipek-jk7cn]

6 is working nice

[@gregm9213]

Should be more like India technology.

[@octaviusgalacticus2253]

I'm staying up all night watching this who's with me?

[@brantgoose]

Can you make a magnet and wire motor and show how to run it with gas?

[@keithcoltron3171]

He uses fart gas it's more volatile

[@brantgoose]

@@keithcoltron3171 lol

[@huckfinn5148]

How could you make it self running?

[@ajroutdoors1408]

Huck Finn not possible there is no way to make a self sustaining generator without the use of an engine turning the generator or another motor

[@zacharysimpson7353]

There is a way but the magnet will spin making it a 12 V or so depending how it's made. Taking a fan motor or whatever to make it spin faster will bring it up. Spin the object fast to get it going on its own.

[@zacharysimpson7353]

I have a video of someone doing just that too

[@soburnedout]

You could hot glue some large paddles to the motor shaft and mount it over a river lol. Not sure what you mean by ‘self running’, but you should know that there’s no such thing really. The hypothetical machine that creates power without another source of energy provided, is called the perpetual motion generator/machine. It’s impossible since energy can neither be created nor destroyed.

[@lilydemon9020]

que bien! gastar 24v para obener 12v eres un genio!

[@JoseRomero-un9sg]

Solo es una idea puedes usar una propela de un ventilador viejo y elevarla un poco para que le de el aire y la haga girar un saludo desde piedras negras Coahuila norte de México

[@pappukumargupta957]

Very very nice

[@rizaldolah4282]

Only volt,but ampere? How to raise up ampere?

[@dickrowilsonbecerraherrera]

Obliosy change ampere

[@keithcoltron3171]

With a VERY strong jack

[@BigDColeman]

Where do you get the music?

[@timothytripp4594]

They are just driving up the prices of the materials they are using

[@timothytripp4594]

A sales promotion for hot glue copper magnets and scrap metal along with plastic and the price of wood lol we don't need people wasting their time using more electrical current then they are producing but in a prospective they are only trying to get the young kids to do something besides set and play games on a computer or cell phone LOL

[@ivanjuca2837]

Thankssss.

[@EduardoGonzalez-xi1uy]

i like 3 for the simple

[@abhisekmangarajvlogs1046]

In which format you are uploading your videos

[@benselter9223]

Die Spannung ist gut aber leider keine Ah/mah oder nur sehr geringe 0,1 mah

[@philippinedailyhappens6673]

He use battery inside dynamo.. or rolled coper wire.. we diddnt see it but search the how to make generator using dynamo the result is fake.. the secret is inside the generator there is a small battery that connected to the wire outside of dynamo

[@rogertyler3237]

You Need A Generator With No Outside Assistance Like A Speaker Magnet With Copper Wire Wraped Around It.

[@abdelfettahoumizane9396]

Thanks man

[@superabbasalmani6079]

Bravo ! American Tech spiced with Indian curry hahahaha ! Thanks Bro ! Do not stop !

[@BigDColeman]

What is the name of the song that started at 42:15?