Found your video about needing a filter while I deciding which machine to buy. Ended up using your referral link :) As I wait for my machine to ship, this was really helpful. Thanks so much for these great resources!
@85thandPine Жыл бұрын
Thanks so much Sam! Appreciate that!
@valeriesellers3212 жыл бұрын
My husband and I have been watching your channel for a while now and we took the plunge today! We bought a Glowforge using your referral code. Thank you for inspiring us to start a custom laser engraving business!!
@85thandPine2 жыл бұрын
Oh thank you so much Valerie! I’m so glad I inspired you guys. And we are so very thankful that you used our code. It will help out me and my family more than you realize. I’m forever grateful for starting a laser cutting business and I know how much it can change other peoples lives so I’m sure this will be a great journey for you both!!
@meganclairerobb3 жыл бұрын
Can you do a video on how you clean your machine as well as the materials you use and buy?
@85thandPine3 жыл бұрын
Hi Megan! Yes! I was planning on doing that very soon. Thanks for asking.
@alyssaroberts44453 жыл бұрын
My husband just purchased me a Glowforge! I had been showing him your videos and I think he used your referral. So excited!!!!
@85thandPine3 жыл бұрын
That’s great!! Thank you so much! You’re going to love it 😊
@phoenixforged19523 жыл бұрын
I just ordered mine and out should be here Sunday. I'm excited and appreciate all of your knowledge!
@85thandPine3 жыл бұрын
That’s awesome! Thank you so much for using my code. My family and I are so thankful! Best wishes!!
@dawndee9832 жыл бұрын
Thank you for the referral code.
@85thandPine2 жыл бұрын
Absolutely! Happy to help in any way. Thanks for using it!
@adamfonder92313 жыл бұрын
You always say me and my family would appreciate it... and your sharring so much... when i buy my glowforgepro im using your link thankyou for all your help in my decision to do a glowforge
@85thandPine3 жыл бұрын
That’s so kind of you, Adam! Thank you very much! Let me know if you ever have any questions and best of luck to you!
@margiecurran11823 жыл бұрын
I'm also looking into purchasing one. I have a lot of SVG files saved for when I get one. Thanks for all the info. Maybe if you did a little series from start to finish. How to start, the program and cutting. Just a thought.
@85thandPine3 жыл бұрын
Thank you for the comment! That’s a great topic and I will definitely be doing a video on that soon. 😊 Best of luck to you.
@l.r.designstudioslauriesul89933 жыл бұрын
I just bought mine using your referral link :) thanks
@85thandPine3 жыл бұрын
Thank you SO very much!! My family and I really do appreciate it more than you know :) Best of luck to you and let me know if you ever have questions! -Catherine
@Sparrao343 жыл бұрын
Thanks for the valuable info, i'll be getting one soon
@85thandPine3 жыл бұрын
You’re welcome! Glad to help.
@FLEAMARKETRESCUE2 жыл бұрын
Hi Catherine...I saw in your link products that you have safety glasses listed. I'm just starting out with the Glowforge Basic and thought the glass on the Glowforge was enough protection...but after seeing this...now I'm wondering. Eeek! Do you wear your safety glasses when you are using the Glowforge? Please let me know your thoughts on this. Ok? Also, I don't see a link for the 3M tape that you use...can you give me a link to it? Thanks! Love your channel, Catherine!!!
@85thandPine2 жыл бұрын
Thank you so much!! Yes, I do wear safety glasses while the machine is running if I’m looking at it. I would recommend it to be on the safe side. Here’s a link to the 3M that I tried out (it worked well). Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 12" x 12" (5-Pack) a.co/d/h7Bwow1
@FLEAMARKETRESCUE2 жыл бұрын
@@85thandPine Thank you, Catherine!!!
@momx4kds3 жыл бұрын
I’m really thinking about buying one soon
@85thandPine3 жыл бұрын
If you do, feel free to let me know if you have any questions when you start using it.
@kelcihollis39913 жыл бұрын
Hello! Can you do a video of where you buy your wood?!
@85thandPine3 жыл бұрын
Hi Kelci! Thanks for asking. I’m actually working on that video right now and will plan to have it up soon! 😊
@kelcihollis39913 жыл бұрын
@@85thandPine thank you! My glowforge will be here in April, so trying to soak in all the knowledge I can! Love your videos!
@85thandPine3 жыл бұрын
@@kelcihollis3991 Awesome! Thanks so much!
@veronicamiley74953 жыл бұрын
Any concerns with the masking tape that you referred as it is not recommended with laser cutters, according to amazon,
@85thandPine3 жыл бұрын
I did notice that on Amazon. The company that sells this product says they don’t recommend it because there is a chance it can cause a fire. I had one instance where I had an issue with a small contained fire but there were other factors involved (the outside temp was below 20 degrees and that caused my transfer paper to peel away from my material since I was venting out the window and letting a lot of cold air in before I cut). So, other than that one time, I’ve never had any issues with it.
@roghalls3 жыл бұрын
I followed the link for the masking tape and it said not to use with laser cutter. So is this the one you use? PAPER TRANSFER TAPE: Our PAPER transfer tape is a versatile MEDIUM-HIGH TACK tape for applying craft and sign vinyl to applicable surfaces. NOT FOR USE WITH HEAT TRANSFER VINYL OR ANY LASER CUTTERS, ENGRAVERS or LASER DEVICES
@85thandPine3 жыл бұрын
Yes, that is the tape I use. I contacted the company before using it and they said they don’t recommend it because of causing possible fires. I’ve also spoken to the supplier I use for my wood materials (Smokey Hill Designs) and they said that’s the tape they usually recommend, plus they know most of their customers use this tape as well. I haven’t had issues with it so that’s why I still use that tape. :)
@roghalls3 жыл бұрын
Thank you. I will purchase some. I’ve watched many videos and it appears many users don’t use the masking tape. I will because I don’t like the burned look. I just received mine and I’m going to setup it up today and tomorrow. Thanks again for the helpful information.
@85thandPine3 жыл бұрын
@@roghalls You’re welcome! I also don’t like the burnt look. I’ve heard you can get off if you try wiping the material with rubbing alcohol and a cloth, but haven’t tried that. I use to sand my wood materials after getting burnt marks but that took too much time vs just using the tape. Good luck to you and enjoy!
@MamaArrow3 жыл бұрын
Wait a minute in your intro how did you get it all peeled in one shot?
@85thandPine3 жыл бұрын
I started to peel it off camera first to get it going, then it made it quicker for the video 😊
@geauxsavvydesignsbyShon3 жыл бұрын
Which Glowforge did you purchase?
@85thandPine3 жыл бұрын
I purchased the basic model. I do plan to get the Pro in the future since it has the pass through slot 😊
@sincerelytatum53763 жыл бұрын
Hi Catherine! I have a question, if I purchase files on Etsy, am I good to use the file cut it and then sell the products I created? I’m just worried because I see some people say the file has to be for commercial use. Pls help.
@85thandPine3 жыл бұрын
Hi! The finished products you create from my files can be sold however you like. I don’t have restrictions on that. My only restriction is that you cannot resell the digital file. Everyone is a little bit different so it usually says in the description on what you can use it for, personal or commercial.
@sincerelytatum53763 жыл бұрын
@@85thandPine thank you! I am so nervous and anxious to start, I am debating if I should start thru Etsy or just go with my own website. I need to hustle because I left my job recently so I can start my own business. But I am torn, since I’m just starting out.
@85thandPine3 жыл бұрын
@@sincerelytatum5376 no problem! And if I were you, I would personally start on Etsy. Only because it’s very straightforward and they are a major marketplace so you already have an upper hand in getting random customers, plus you can pay for extra advertising if you want. They do take a portion of the sales but I think it’s still worth it to start. I’m trying to make my own website now and it’s a little bit of a headache, just running into a couple issues. But I will eventually get it up and running!
@KodyK20243 жыл бұрын
Does the GlowForge cause the table become hot? Thanks.
@85thandPine3 жыл бұрын
Hi Cindy, good question. I have not noticed any heat on my table. I run my machine for multiple hours sometimes (off and on) and never noticed that issue.
@KodyK20243 жыл бұрын
@@85thandPine THANKS.
@KayJays3 жыл бұрын
The link is not working for me. Is there a specific way to do it?
@85thandPine3 жыл бұрын
Hi! Thanks for letting me know. I'm so sorry for the inconvenience, I am in contact with Glowforge to get it resolved. -Catherine
@85thandPine3 жыл бұрын
Sorry about that. It should be working now. Can you try again and let me know? It should take a few seconds to pop up once you open the link.
@KayJays3 жыл бұрын
It’s working! Thank you so much.
@KayJays3 жыл бұрын
@@85thandPine I just used it and it showed it worked! I hope it went through for you too! Not sure if it takes some time to show.
@85thandPine3 жыл бұрын
@@KayJays thank you SO much! Yes, I see that it went though. I truly appreciate it! Let me know if you ever have any questions once you start using it 😊