Top 10 PARKSIDE Tools | 2022

Unboxing and test of my top 10 tools / machines form PARKSIDE. I bought these tools in a local store. They are very good for DIY hobby work.
Get it here: amzn.to/49M4zFF
Subscribe for more!

[@MakeAndTest]

Get these tools here: amzn.to/49M4zFF

[@AdaoalvesalcidesfilhoAlves]

Huehdg

[@farm38]

One of the best tool unboxing I have ever found on You Tube Well done

[@MakeAndTest]

Thanks man, glad you like it!

[@surindersinghsurindersingh4809]

ਵੈਲਡਿੰਗ ਸਟੋਰ ਕਿਥੇ ਹੈ

[@maartenvisser4660]

@@surindersinghsurindersingh4809 ft

[@incubatork]

I use makita mostly for tools I use regularly but for occasional use I have found that the ones made by einhall but with Parkside stickers on are reasonable quality for the price. I have bought parkside tools for 1 off use and still have them there ready for the next time if needed. I cannot understand why people buy parkside and try to compare them to makita, bosch, dewault etc. for the price of 1 bosch or makita you can buy 5 or 6 different tools to try, once you find out which tools you use most go buy a better quality one. For general DIY guy and jobs round the house they are perfectly good tools as long as you relate the performance to the price you payed. Good video though I can see you are not a welder, results not all the machines fault. 😆

[@stigkrakpants3052]

Ferrex does compare to Makita, Makita are more refined and last longer. I have spent 6000 on Makita and nearly 1000 on Aldi tools, my last bargains were the two Batavia Step Benches, only £30 each, down from £130 each. DeWalt have slipped in quality.

[@windmillproductions4061]

Great demo. Welding test very thorough !

[@madhounddog04]

I don't have any extra money for any of these things. I'm on a set budget. I'm a disabled veteran and me and my wife are barely making it now. I wish I could get some of the things that are on your channel. Keep up the good work.

[@ครูเสือเบต้าปลากัดป่า]

ตัละเท่าไหร่ครับ

[@ramkishorvishwakrama]

इस मशीन का प्राइस क्या है आप हमें बताएं

[@robbieking8874]

Are u wanting a hand out or something or me to magically give u it ? U might be stugling or what but these tools are cheap of the cheap pus some mond buy 1 paund a week a week until u can buy it or anything uses said tools learn with disabilities and make wee things and sell them boom u get both problems solved dont u and if u cant aford 1 paubd a week or more im sure if u scavenge u can find i built up a full garge age of 12 with no money snd only stuff i cauld find and get for free of facebook etc and work my way up and got a full snap on tool box bye the age of 15 and spent less than 100 quid it’s possible

[@madhounddog04]

@@robbieking8874 did you even read the damn posting! Not once did I ask for a damn thing on here! I too have almost $10,000 worth of tools in my garage. I just don't have anything like that! As for my disabilities, I was disabled in Iraq!! You might want to go back to school and learn how write! It seems like your education has suffered really bad. I used to be a certified mechanic. And a CNC machine operator. Plus I know a lot about woodworking and bricklaying! I also was taught a lot about construction. I have all kinds of great tools in my garage, just nothing like this! Like I said, my disabilities money only goes so far! So get off your high pony and go get you some fish and chips, okay matie!

[@vitbenedikt]

Укажите ваш банковский счет, может кто нибудь , переаедет сколько то

[@atulk9947]

Thank you for sharing. 17:18 Power weeder is excellent product. Grinder required more improvement.

[@joebiggleywopper6110]

Not sure why people complain, Parkside is great for odd jobs and DIY, maybe some additional site work.

[@skaters2007]

Finalmente un video senza tante chiacchiere . Molto efficace, grazie !

[@John_Smith__]

Thanks for posting this video, very very informative!

[@richardbickle4098]

really appreciate these videos

[@sjm88channel27]

Nice vedeo👍🙏💪

[@sddiymakeitworthit7512]

Super parkside collection 👍

[@MakeAndTest]

Thank you 🤗

[@tobiasandersen1168]

I want the plasma cutter and parkside is underrated its pretty good for the price :)

[@giuseppeloiacono6167]

Si può rivedere all'opera

[@lyceedubois5403]

Great video ! congratulations

[@marekzalewski8447]

Very helpful, well made video. Thank you

[@flitsies]

Parkside tools are very good tools, and the price is usually good as well.

[@AfganeAfgane-ms2lb]

Very good tools including

[@MakeAndTest]

Glad you think so!

[@plachdilna]

Nice video. Good Job 👍🏻🪚⚒️

[@ErCanEverything]

Nice video👍👍👍🙂👏👏👏🤝

[@RD-650]

Very good 👍

[@luisundercoverptcat.]

hi,iam buy a combi drill,and so far is good.very fast and precise!!hello from scotland.

[@txusicB]

Hi yhanks for the videos, unfortunatelly i caight theem late... any idea how good or bad, and how it compares, theeir new version of the 120 welder: PIFDS 120 B2? thanks in advance

[@MakeAndTest]

I would suggest other brands. Check out my channel for more and better welding machines

[@txusicB]

@@MakeAndTest thanks for the quick response.. i was looking for something cheap that can do fast, easy and sparse jobbies... flux welding seems very easy and fast... not great welds, but enough for what i wanted to use it for.

[@Pitr1975]

Very great video i love it to watch

[@stoneycut]

Got a parkside jet wash as my karcher lasted 18month and must say its 5x the better kit

[@sarahofarrell317]

How much was all that stuff

[@MakeAndTest]

Dont know sorry

[@gerry5134]

The plasma cutter a really amazing tool. Would be good if there was an attachment and rods that would make it double as a type of tig welder but without gas

[@rcblitzfpv8346]

You have to have gas for tig welding no two ways about it

[@gerry5134]

@@rcblitzfpv8346 maybe a new invention is overdue to make it possible!

[@rcblitzfpv8346]

@@gerry5134 it's needed to cool the tungsten and dhrild the weld pool no way around it

[@joszoet4003]

I bougth a Parkside drillmachine 20 V....in a LIDL shop. Really super, powerfull, complete in a box for small money.. Good stuff dont need to be expensive..! Its much ,much better than my old Bosch... And... I am not payed for promotion..

[@MakeAndTest]

Sounds great!

[@bukalex1]

Hi, why was angle grinder stopping?

[@thinksoodthinksood908]

Wow, I'm so happy that I have decided to by the Jigsaw bosch gst 8000 e. Now I can really see the difference ;P

[@claudiotsolakis]

quindi come valuti la saldatrice a TIG ?

[@ebxo269]

What was the settings on the flux core welder you used for that gauge metal,?????

[@jayanunnithan7395]

Good machines..how to buy ..give purchase link...

[@TheLightMyFire]

Welding is more complicated than people think,use more amps to actually weld the pieces toghether use to many amps and the metal will get brittle.

[@yaroslavtsapulich3957]

Гайковет на 20Вт. очень зачотная вещ, купил и ни разу еще на пожалел. Сам менял задние амортизаторы на минивене за пол часа оба , аж сам удивилкак как так быстро. Но шурик 12Вт уже живет с мотором со старой макиты, сверлил 8 мм. свердлом несколько отверстий и задымелось из него((( Ну так скажу техника для гаража не более если 2-3 раза в месяц пользоватся !!!!

[@jurgenraven5610]

I have been running parkside 20v battery tools in my workshop since last year They've been doing great The battery's don't last very long but they also don't cost a lot and charge quickly

[@MakeAndTest]

Thanks for sharing

[@Failsafeman100]

Do you mean they discharge quickly, or they don't have a long service life?

[@antoniettagioiosa1150]

@@MakeAndTest mnbvcxz

[@geordanchavis8006]

Do they all use the same kind of battery?

[@martyn52]

I was going to buy one of these. Only it said it would not work on household 13amp circuit.

[@RDian.]

keren banget mesin las nyaaa , sukses slalu

[@oddsock7100]

Very helpful video, Is the twin battery multi tool available in the UK

[@MakeAndTest]

Not that I know of.

[@yahtutik6982]

Video bila ketempat kerja proyek bengkel.masih berternak ayam hobi dirumah.Video tool alat alat kerja

[@umarurazaliev6263]

Bu aparatlar qancha qayirdan topsa bõladi

[@davidcrimmins8824]

Unrelated to the equipment being tested. When mig welding with a bare wire you should push instead of pulling. You will get much better penetration.

[@plunder1956]

The garden Multi-tool looks a lot better than my mains long hedge trimmer I bought a few years ago. As yet we haven't see any of these new 40v dual battery units in the UK, now we may not get ehm due to BREXIT.

[@stigkrakpants3052]

yes Brexit is fantastic, freedom has started in Great United Kingdom, it will spread to Italy and Sweden. The NWO will be stopped. Claus Schwab is finished.

[@stigkrakpants3052]

buy Makita, the best

[@asifawan4935]

A

[@cestvraimenthorrible3465]

So the welding machine at first is set to Mig, but later you connected gas to switch to Tig operation? I know there is a gasless Parkside welder ( flux ) but I'm not sure which is which and what's the difference between MIG vs TIG.

[@valerivasilev3118]

Действието с почукване на горелката за да премахне отрязаното парче е недопустимо.Има чук за тази цел.

[@romansegin53]

Уже давно користуюсь ,інструмент добрий провірений ,за китайський кращий ,

[@richardbickle4098]

so is that 16g metal plate?

[@brokendreams5864]

What Compressor do you use with the Plasma Cutter, as its so quiet I can hardly hear it running

[@keithhooper6123]

I believe the compressor is built in to the plasma cutter.

[@cowwhisperer8927]

32:57 You're welding the three ?? :D

[@MakeAndTest]

Yes :)

[@supernovat7]

Excellent review !!

[@MakeAndTest]

Glad you liked it!

[@toolsandsmash860]

I like the welder what parkerside makes

[@ilietarna8217]

What air compressor are you using

[@xavierben7967]

what all safety things you should wearr during using plasma cutter ?

[@DjDolHaus86]

Safety glasses, thick leather gloves (gauntlets) and avoid wearing any highly flammable clothes. Hot metal in your boots is no fun so either be mindful of where the slag (molten metal) is going or tuck your boots into your trousers

[@highloughsdrifter1629]

It's a welding process so you need a welding mask. Safety glasses won't block enough light. Self-darkening shield (also available from Lidl) is easiest.

[@predicative1244]

У меня перфоратор от парксайд, теперь немогу якорь найти, кстати где можно заказать незнаете, и место рождееия производителя парксайд.? Лайк от меня, классная подборка инструмента.

[@amashadewduni2508]

plez tel me,what's country.this tools made.

[@jamesmcgowan7382]

were can you buy parkside tools

[@MakeAndTest]

Lidl

[@binhnguyenquannavy2640]

Tình yêu của tôi đã dành cho những cái máy này từ lâu rồi nhưng chưa có đủ điều kiện để sở hữu chúng., Chúc mừng bạn.❤️

[@ruuddeboer1896]

De zaag werkt fantastisch maar ik ben al een maand bezig om een nieuw zaagblad te bestellen en dat is nog steeds niet gelukt dus staat de zaag werkeloos in mijn werkplaats

[@MakeAndTest]

Return it.

[@tanthiennguyen9308]

Guten Herzensgute für Home Anwendern................! Vielen Dank allen Mitarbeitern an Kompetenz Arbeitsplätzen Zufrieden haben bitteschön

[@lovingitandlife]

hi,nver done welding before,so when you bent it inthe vice and it broke was that good or bad?,also i have an old land rover that needs welding on chassis 3mm thick i think will that be ok for that?,god video by the way,thanks Mark

[@MakeAndTest]

It's good

[@johnmathew8327]

Where is these available in Doha, Qatar. Please give the details, if you could. Thanks and Best wishes

[@motalasuger]

I’ve got the battery grinder, and it’s pretty nice with the variable speed when using different types of sanding discs, though I doubt it’s for anything more then light home use in quality.

[@jmills1549]

I have the grinder and it's been used for cutting steel, then cutting bricks.. Have 2 5ah batteries and it does job well... Ideal if on roof and odd bit of pointing (cutting out).... Very pleased so far....

[@Miestwin]

I heard from a few guys that it's easily bricked. You can't work with it too long, because once you overheat it, waiting to cool it off won't do anything. It won't turn on again. One dude bricked three grinders this way. On the third time, he asked for a refund.

[@motalasuger]

@@Miestwin Yeah I noticed that there is a very slight leak of oil from the gearbox if it gets pretty hot after running for a good while, but with how rarely and short periods I use mine it probably won’t be a problem. My vibration multi tool though almost fried when I overloaded it, the motor stalled and I could see visible sparking / light from the motor, fortunately it still worked after shutting it down quickly enough - though it smelled of burnt motor after.

[@rikwhite6337]

@@Miestwin duh..... it's a fucking 30 quid grinder from a supermarket... not a professional tool. If you run it long enough to get it hot you are needing a pro tool. It's not hard to figure out the difference between a 12inch man eater and a couple of times a year battery tool.....

[@naqelnaqel9999]

Realy aim so greatful for it all , hope if I could have all of them. 🙏 ❤ ♥ 💕 💗

[@cheangsim8845]

យកត

[@adrianstefan23]

Foarte bune👍👍

[@dawid5721]

Jedz na robotę z takimi narzędziami 😂

[@بوكرمالخفاجي]

هل يمكنك توفير فديو لدريلات الحفر ؟

[@Siedliskowy]

Prarzecinarka plazmowa Parkside robi robotę

[@andrzejbuszko117]

tz jestem zadowolony z zakupu aczkolwiek bylem na poczatku nastawiony sceptycznie

[@alforey8357]

Uds en dónde los puedo ubicar??

[@margauxmartonia4400]

how to order that unit

[@bajibulofficial4764]

Verrygood tool

[@imranali-jj9wm]

Bhai welding machine kitne kimat ka hai yah

[@kacpergorny5108]

Można namiary na tą spawarko-migomat?

[@anwarrodin6223]

Mantap serbaguna hargga berapa bos

[@usczechfarmer1947]

samej krám , je to telekrám ( krom plasmy a ty kombinovaný invertorový svářečky ) Ta Akupila taky ujde.

[@mohammadyounus5138]

Is it available with 40 Amps please and how thick of sheet metal you can cut with the 40 Amps please ?? and your response would be highly appreciated....SIR GEE

[@fullteamgarage]

Good video 👌 saludos desde full team garage

[@jackHM6PRO]

Not bad😮

[@kitchenhamfarm]

are you the stig ?

[@MakeAndTest]

I can't tell u

[@florentinoramos5544]

How much welding machine

[@F350VIN]

Bought the 20v angle grinder and the 20v drill, both packed up on afew hours worth of work, the drill speed just slowed as if it's struggling, the angle grinder motor just stopped working.

[@haydnbrewer7426]

It’s parkside one of the worst tool brands going

[@amashadewduni2508]

i like all tools.i am from siri lanka.iám elictresin.thank for you.

[@oanvan9117]

May nay bao nhiêu tiên vay

[@VanDerLaars]

I'd say the welding machine is for hobbies. No hobby will apply that much strength to anything.

[@kaasmeester5903]

I use this machine and it produces "pro" quality welds when operated by a competent welder. It's only a hobby machine in the sense that you probably wouldn't want to run this thing all day every day, like most of these cheaper tools.

[@johnchristmas7522]

FIRST Question. Where is it made?

[@matteo7508]

26:41 Fa questo durante una sponsorizzazione, figurati nei momenti normali di lavoro come tratta gli attrezzi.

[@roldanbongreyes8414]

Cutter how much sir

[@weldingwarksiz2481]

Wow best

[@Je-Welds]

Me ask what type of camera for the Arc Shots? thank you..

[@MakeAndTest]

Normal photo camera.

[@emilianozaratevenegas3734]

Soy de costa rica como ago para arquelir esta erramienta

[@gilcamina8075]

ola ! no llo compra es malo !!

[@selvamlskofco4520]

என்ன விலை?!.

[@masumrana5094]

কোথায় পাবো মিশন গুলি

[@semssali]

Salam Bu svarka aparatl neciydi nece almaq olar❓

[@semssali]

Qaynaq aparatl necyedi?

[@norbertenderle8092]

Salam,Lidl Online ,Parkside Plasmaschneider

[@gorand.Mala-radionica-1]

Ja sam kupio čeonu brusilicu i nije nizašta trese ubi ruke. Toliko trese da jedva stisnem dugme da je isključim

[@donadumandantripoli7176]

This product Parkside cordless chainsaw available in shoppee or Lazada how much the srp

[@roccodomenico7435]

Dove trovare questi utensili

[@beayemehari4837]

Bellissimi, dove posso trovare in Italia?

[@robertkrej.8141]

Parkside é la marca si compania Lidl

[@mercyayong7709]

how much

[@anmolrai8250]

Iska rate kitna hai btaiye

[@_erdalbuyuk]

52:56

[@tipko1863]

You can see the addiction manifest itself in real time, as he finally succumbs to buying the LIDL sneakers as well... God damn you Parkside LIDL

[@MakeAndTest]

The addiction is strong. But unfortunately I didn't get the lidl sweater.

[@tranthithu2114]

Good

[@SaidSaid-pd2jx]

ممكن سعر مكاين الحام