Top 4 S&W Shield Plus Holosun Red & Green Dot Sights + Adapter Plates

[@freedomgorilla1]

Which one do you like best and why? Read the blog post and see the adapter plates here --> freedomgorilla.com/blogs/news/top-3-sw-shield-plus-holosun-optics-how-to-mount?yt

[@friendofGod99]

Thanks for this video. I learned a LOT about red/green dots from your presentation. Great job!!!

[@freedomgorilla1]

Thank you

[@John-st5gw]

Thank you for all the information. You helped me in making my decision. I put the 507K X2 on my M&P Shield Plus and I'm very happy with it.

[@freedomgorilla1]

Your welcome!

[@theNfl_Esq]

Appreciate the advice. Do you run anything else on other pistols?

[@Jiggavel]

Great video really appreciate the breakdown on the different versions of the holosun’s

[@freedomgorilla1]

Thanks for watching!

[@Scientist_Salarian]

Great video. It’s surprisingly hard to get good info on the Shield Plus optic mounting process. Lots of info for the 365 and MOS systems, but it’s almost like S&W thought “Well, I guess we have to give people this option, but we’re not happy about it.”

[@freedomgorilla1]

lol. Thank you glad it was helpful!

[@bAc0nBoY755]

Can you cowitness with the 407k

[@chuck1388]

Excellent video. Thank you.

[@freedomgorilla1]

Thank you!

[@clausidrogo6257]

Excellent information !!!!!!!!!!!!

[@freedomgorilla1]

Thank you

[@PeterKushubar]

Outstanding video, with fantastic information: I learned more in this video than in all previous videos, from other knuckleheads! Thank you very much!

[@OnePointLander]

Wish they had a chevron version for the shield plus.

[@freedomgorilla1]

Yea people have asked us about it, it’d make sense

[@ShootStraight84]

Great video man !!!!

[@freedomgorilla1]

Thank you

[@commonsense5767]

On your website, it says the EPS carry is direct mount is that still the case?

[@freedomgorilla1]

It says that? Eps carry comes with the plate that will allow it to work yes

[@Cusackshike]

Excellent video. Just ordered the adapter plate and green dot holison.

[@freedomgorilla1]

Thanks, we appreciate the order!

[@gregwright6565]

I have the 4" PC model that I would like to upgrade the red dot on eventually. I am reading that a lot of people are having problems with their elevation bottoming out because apparently S&W mills a very slight slope into their cut. I really don't want to send it off to be remilled, or to do it myself with a dremel. Do you know anything about this issue?

[@tickedoff1438]

This is what I want to know about too.

[@Brunoku]

@@tickedoff1438I’m in the same boat trying to figure this out. I think the “bottoming out” thing is only an issue when people try to mount dots without a plate because there are some that will seem to fit. I can’t find a concrete explanation though.

[@Thomk121]

I've heard this too. I'm picking up my shield plus on Saturday and I want to get a RD right away. I think I'm going to order a shield or a crimson trace because they have the RMSc footprint that we need.

[@JCarta773]

What suppressor/ optic sights I can install with these optics?

[@KommKarl]

Great video!

[@freedomgorilla1]

Thank you

[@klusterphukk]

Any holster brands that are compatible with recover tactical rail and light?

[@shooter3288]

Great video. Do i have to shorten the lugs any on the shield slide to make the plates work? Really dont want to have to dremel anything if i dont have to

[@freedomgorilla1]

Hey. That’s an option. But not required. We sell adapter plates you can use and you just use it like a shim

[@Gwillis7]

Great video! Thanks for that info. You need a bigger 🎤 though

[@bradkenel6341]

If I buy the eps carry, do I have to buy an adapter plate?

[@freedomgorilla1]

The eps carry comes with a RMSc to modified RMSc plate in the box!

[@bradkenel6341]

@@freedomgorilla1 so I do not need anything else besides the eps and what comes in box?

[@freedomgorilla1]

@@bradkenel6341 The EPS Carry comes with an adapter plate and screws that will fit your S&W Shield Plus! 🇺🇸🦍

[@bradkenel6341]

@@freedomgorilla1 thank you!

[@ArthaxtaDaVince777]

​@freedomgorilla1 do these adapter plates fit on non optical ready shield plus?

[@jonsmith6675]

Thanks

[@freedomgorilla1]

Yw ty

[@Silojohnson]

👍Thanks dude

[@freedomgorilla1]

Yvw

[@Andrew-vw4ld]

Will the Holosun HS407K x2 fit the m&p9 shield plus ? My cousin sold it to me for $50 because it didn’t fit his gun and one of the screws was striped and he gave me new screws for smith and Wesson 2.0 from a vortex optic kit he has. will those be fine to use ? They seem to fit good. Also does the “HS”407k just stand for holosun ? I hope I haven’t messed my screw hole threads up.. He also gave me a plate that fits good but sticks out a tad bit to where you can feel it coming out of but sided under the open but barely noticeable.

[@freedomgorilla1]

You need an adapter plate. We sell them. You also need 6-32 screws which don’t come with the optic. The adapter plate has eveything. It’s on our website

[@Andrew-vw4ld]

@@freedomgorilla1 okay great I’ll definitely get one thank you

[@abelrosas2736]

Anyone know what light is being used on the thumbnail picture?

[@jone5591]

It's actually not a light, it's a Recover Tactical S&W M&P Shield Picatinny Rail Adapter

[@St.Louis_81]

What mounts on the mp without an adapter plate

[@freedomgorilla1]

Vortex defender ccw, viridian rfx 11, viridian rfx 15. We have them on our website

[@SirChocula]

Can I install these sights + plate on a Shield Plus CA version?!

[@freedomgorilla1]

If the gun is optics ready yes

[@DavidChatterton-j6b]

I don't like the way the dot floats around in the glass. Can't get used to that.

[@resolute123]

The closed emitters are not purged with nitrogen are they?

[@freedomgorilla1]

Yes

[@anthonynavarro101]

Can you mount a sight on the M&p shield ? (Not the +)

[@anthonynavarro101]

Shield 9

[@bradbrinegar1419]

If your slide isn't milled to be optic ready then you will have to send it off to have it milled or go with a dove tail plate. I have the dove tail but wish I had went ahead and milled my slide. It raise everything up a little to high for my liking plus I had to change my sights

[@raphaelvibes8276]

are this holosun dot sights fit the 30 super

[@gregcombs3254]

The 407k and 507k will mount directly to the slide on the 30 super carry shield plus without an adapter plate vs the 9mm version.

[@TechyMedic28]

How come the Vulcan has a dot instead of a chevron?

[@freedomgorilla1]

We’re not exactly sure. It puzzles us also

[@davew5508]

What material is the eps plate?

[@freedomgorilla1]

Aluminum

[@gkelley77]

XS Big Dot is better than them all.

[@ryetim32]

Must be nice to work for Holosun

[@freedomgorilla1]

To clarify, there’s no affiliation other then we sell their products

[@ryetim32]

@@freedomgorilla1 LOL

[@rickbruceroche2038]

So, you claim the best price available. I just bought a Holosun EPS Carry MRS Green. Your price is $429. I paid $418 INCLUDING tax. Maybe check your competition before making such claims.

[@freedomgorilla1]

We offer our items at the lowest price allowed by the manufacturer and we price match if you find someone violating the price or offering it lower. We’re very confident in our lowest pricing. Thanks for the comment.

[@raygonzales8244]

Can you get me a owners manual for the holosun eps carry green dot. I have been unable to download it. If you can please let me know and I’ll send you my email address.

[@roncelmaxwell]

Very informative. Thank you.

[@freedomgorilla1]

Glad it was helpful!