Top 5 BEST Gun Safe Upgrades | Liberty Safe Edition

[@RoadGlideST23]

As far as the cool packet goes. Can it be mounted to the door on a Browning?

[@A1LocksmithofTexas]

@@RoadGlideST23 Howdy. I wouldn’t say it could be mounted, there’s nothing on the backside of the Cool Pocket to use to attach it to anything. However, it’s fairly slim, so easy to set on a shelf upright out of the way in any safe.

[@RoadGlideST23]

Ok thanks for your input. 👍

[@A1LocksmithofTexas]

@@RoadGlideST23 Thanks for watching!

[@swcrites]

good video. yeah, I'd watch more of them if you make them. thanks

[@A1LocksmithofTexas]

@@swcrites Thanks for jumping on and watching. Please check out the channel, we upload a new video weekly. And always feel free to ask questions

[@self-awaregunship6869]

I just ordered the Clearview light setup that lets you change them. curious though, does the kit also come with the screws to hold them in place? so I can use both the 3m tape and the screws to attach them?

[@A1LocksmithofTexas]

@@self-awaregunship6869 Umm, honestly I’ll have to check. It seems like I saw screws in some recent boxes we’ve opened, but I’ll let you know. The multi-colored lights, right?

[@A1LocksmithofTexas]

@@self-awaregunship6869 Alright, I checked the multi-color led lights we have in stock and there are screws inside the box.

[@_AllDayLong_]

Too bad. No combo dissemination accessory for LE?

[@A1LocksmithofTexas]

@@_AllDayLong_ No there is not.

[@SolutionsTrust]

Can the heating rod be mounted vertically ie parallel to the (tall side of the) door?

[@A1LocksmithofTexas]

Yes, I actually considered doing that myself.

[@SolutionsTrust]

@@A1LocksmithofTexas The reason for my concern is then the heat dissipation being primarily upward means the bottom of the rod in effect heats the portions of the rod above versus when horizontal it all dissipates up and 'away' ... but you dont think that would be a cause for concern as it would certainly help to not loose floor space. Thank you

[@A1LocksmithofTexas]

@@SolutionsTrust I think it’s worth testing. I use the SafElert to see humidity & temp, if you combine that with a dehumidifier we can test the theory. If the idea is to let the rod heat up and slowly increase the air temp around it, I feel even vertically results would render closely the same. Aside from that strategically placing the rod on the floor in between stocks to be safe. I’ve seen others place them vertically for the same reason you want to, but I’m not sure anyone tested the results with something like a SafElert or similar tool.

[@SolutionsTrust]

@@A1LocksmithofTexas More concerned that it is safe than if loses a marginal amount of efficiency. Have a moisture meter coming soon and will see where things are ... thanks

[@A1LocksmithofTexas]

@@SolutionsTrust This is fascinating research. Keep me posted?? I’d love to share with everyone.

[@JeffJinkins]

Love this.

[@A1LocksmithofTexas]

@@JeffJinkins We highly appreciate that

[@JeffJinkins]

Awesome! Like more content like this!

[@spyderlyf3]

Outlet kit needs to be #1.. once the safe is installed ts almost impossible to install if next to a wall.i pretty much added all of these to my Liberty safe.

[@A1LocksmithofTexas]

Nice!! Yeah, I tell customers that at the register you’re right

[@petewheeler4769]

Good stuff!!

[@A1LocksmithofTexas]

@@petewheeler4769 All available on line at our store and thanks for watching!

[@59chevt]

great informative presentation........

[@A1LocksmithofTexas]

@@59chevt Gracias!

[@daveirons477]

Just got the Ts36-45 seems pretty nice for the price [$ 588 out the door] . My question is when the door is closed it doesn't seem like it fits very tight. There seems to be a little slack in the bottom on the locking side. Is this normal? Any one else have this issue? Thanks

[@A1LocksmithofTexas]

@@daveirons477 Is that a Winchester? A lot of doors have play, pretty normal. Open the door, look on the inside of the jam and see if there’s any adjusters. If not, email me and I can try to walk you through making your own door adjusters. Some manufacturers have them.

[@darrylmorris350]

What do you think of the doomsday lock? I’m about to order a fat boy extreme and I have the option to get the doomsday. Can you give me your opinion please. Thank you for your time Darrell.

[@A1LocksmithofTexas]

Hey, Darrell, thanks for reaching out. Honest opinion, I don’t have one because I’ve never sold it. I’ve seen it, I’ve played with it. Not enough R&D from our customer base to give insight. I will say this, I’ve used one from SecuRam several times and it was touchy during instal, but I’ve only had to drill one or two. I think you’ll lose your Liberty factory warranty going with the Doomsday, so I do not like that. And if anyone is generally concerned with EMP protection I always strongly recommend just going with a mechanical lock. I love the concept of having both built in and I get it, but a mechanical isn’t hard to learn, but if you don’t do it regularly it’s gonna be a learning curve in an emergency situation. I don’t like that aspect.

[@georgem9907]

I have multiple digital meters in the safe...they all match...the rods do not work, disicant does though- perfectly

[@A1LocksmithofTexas]

@@georgem9907 I’m glad you’re monitoring and found what works best for you. I’ve personally had great success keeping my humidity down with my rod. Whatever works is all that matters!

[@georgem9907]

I have the Liberty rod and my safe is only the Centurion and the temp does not change whatsoever. The rod feels warm so it does not warm my safe. A dud

[@A1LocksmithofTexas]

Have you tested the humidity levels in your safe to make sure it working? libertygunsafe.com/products/accessory-dehumidifier-humidity-and-temperature-monitor?_pos=1&_sid=642fd8c9c&_ss=r

[@richbarton3903]

It's job isn't to change the temp it is that humidity out of the air in the safe.

[@ElStriker777]

🔥👍

[@A1LocksmithofTexas]

@@ElStriker777 Thanks for watching!

[@UnityRipz]

I need that SafElert. It's way too cool not to have one

[@A1LocksmithofTexas]

It’s basically a security system/alarm for you safe 💪🏻😎

[@A1LocksmithofTexas]

@@ianroan6319 You would know 😎

[@Nightfall-TCG]

I can’t stand those cold feeling hospital WHITE WHITE led lights. It’s just so blinding and gross to me. I installed them into my safe and IMMEDIATELY took em out, put them on the stairs instead & bought warm coloured lights for the safe. I always end up going in and out of the safe at night time when I’m bored and rearranging stuff or whatever & normally I just have my bedroom lamp on low power so it’s pretty dim in there & then I would open the safe and get blinded 😂 team warm lights for the win all day

[@A1LocksmithofTexas]

@@Nightfall-TCG Haha, hey everyone has a thing, judgement free zone here. I’m glad you found something you liked, though. Probably not for you, but the new led lights are multi colored, cool to have a different color in your safe. And I appreciate the OCD moving around/reorganizing, I MIGHT be a little guilty of it myself. Hahaha