TOP 5 MISTAKES BEGINNERS MAKE WHEN HYDRO DIPPING | Liquid Concepts | Weekly Tips and Tricks

Bryan from Liquid Concepts showing you the best tips and tricks for all your custom coatings including hydrographics, cerakote, custom painting, water dipping, water transfer printing and much more!
In this episode of our weekly tips and tricks video, Bryan goes over the 5 mistakes that beginners make when getting into hydrographics.
Be sure to subscribe and like our page for weekly tips and tricks to help better yourself and the coatings you use!
Check out our Liquid Concepts Distribution Facebook page for more tips and tricks as well as sales and promotions that we run all the time! - / liquidconceptsdist
Be sure to join our Hydrographics 101 Facebook Page to get all the questions answered relating to anything in the hydrographics or custom coatings industry! Tons of professionals and DIY people alike have a great time and learn everyday from questions and answers on this page - / 871687239546498
Visit our website for all your hydrographics needs from film and activator to paints, neons, custom film, training, equipment and much more - www.liquidconcepts.com
TOP 5 MISTAKES BEGINNERS MAKE WHEN HYDRO DIPPING | Liquid Concepts | Weekly Tips and Tricks

[@trentpalmer2466]

Just now getting into I really appreciate the fact that y’all are very thorough with step by step dipping videos are great keep em coming👍🏼

[@valzlan3321]

watching your videos on dipping, spray gun selection, spray gun settings and hydrofilm differentiation helped me set my gun/activator to my hydrofilm. Thanks Brian (I used a 1.5g at 44+psi, cheap gun at 1.4 midsize fan spray. got a 8g,5cfm 150psi doing larger truck parts. Thanks brian.

[@pascalbroek848]

Thanks bud,it really isnt easy to do. But with your tips and practice I must say I slowly get the hang of it.I always enjoy watching your vids and it is a pleasure seeing a pro having fun at his job.

[@user-dw1zc1mz2h]

Least he keeps it real not as easy as it looks .this guy is good at what he does.. good teaching very important..

[@user-dw1zc1mz2h]

This guy is good makes it simple to understand good teaching..

[@camaroboy383]

Always valuable content guy's.. keep up the great work and awesome products..✌️.. I definitely felt the over/ under activation was the biggest hurdle when I was starting out years ago.. and I'm not going to lie it still happens sometimes..🤣🤣🤣🤣

[@boof314]

Tip 5 👍👍 It's definitely technique and prep and it ain't easy 👍👍

[@MrShobizz]

Hey Brian that was a great vid..

[@EskayStudios]

Just heard about this the other day, great video!

[@LiquidConceptsUSA]

Thank You. Keep checking back, more in the works.

[@valzlan3321]

To Mr. Videographer, just wanted to thank the camera man also for getting great shots and angles allowing us to see exactly what's happening.

[@nickmata8130]

Sooo I have a quick question, I recently spray painted some Oakley frames and wasn’t too happy with the result. If I primed, spray painted and clear coated the frames could I jump right into the dipping process or would I have to re-prime and start from there?

[@kamilafernando7971]

Grate lecture

[@WetTrioC]

Hello! Thanks for all the info. Just curious how long I have to wait for the primer to dry before moving on to next step?

[@Isaak0700]

Watching these video's helps, but I keep going from under to over activation. I think maybe I need to change spray guns out. How big should the tip be for a spray gun for just using activator? I managed to get everything else right, I've been taping all four sides of the film and its been working, I've been getting the spraying for primer and paint down correctly, I can even do rolling dips on firearm stocks just fine. My issue is that I've been having severe issues with activator. I've tried the activator cans but the same thing happens. I've never gotten it "just right". It either ends up under activated with jagged holes in the pattern, or it looks super faded with parts of it sliding off and having smooth pin holes in it. Thanks for the content though, it helped me set everything up and do all the other stuff right, just not the activation part. I just keep messing it up.

[@Ash0282]

I've done most of my cars interior in your alls carbon fiber. Thank you for the videos and all the great products.

[@abeljames2775]

how did you do your steering wheel? will the film stretch enough to cover the curves?

[@Ash0282]

@@abeljames2775 i just removed the center bolt and a few other screws. I sanded and painted it and dipped it then cleared it. It covered all the way around. It still looks really good

[@melissametzger412]

I just dipped a small gun part. Had cleaned it, scuffed it and primed it 2 days ago. My test was good but when I dipped the part, it looked great when I pulled it out of the water but when I rinsed it off, not only did the pattern come off, the primer did too. The part had a camo pattern but I cleaned it and scuff it and thought priming it would be ok.... do you know where I went wrong? I don't want to dip the rest of the parts til I find out why this happened. I'm new at this but I've done several pieces and this is the first time this happened.

[@CRXUGLYKID]

Can you hydro dip pieces of rubber? And if so,what's the process.I tried to do these little pieces of rubber covers to test it. And upon washing off the goo it came right off from me rubbing.I didnt do the reg steps(priming,sanding ,applying a promoter,) wanted to see if it was possible. Thanx and love your content.

[@abeljames2775]

can you post a video on how to hydrodip steering wheels? maybe in some sort of a wood finish?

[@noahkumm5111]

Do you have to primer plastic, exactly a rough textured cold air intake tube? Your video was so super helpful.

[@Kwago1]

Hi, I'm dumb, I mean new to this. I'm looking for the bear metal look & I was wondering if a clear adhesion promoter would work instead of paint for transparent graphics designs.

[@johnervin4469]

Did you replace your water for 2nd dip? or what strategies did you use to save water? thanks

[@BeardofAllTrades]

great video. where could we get the printer and film for custom hydro graphics?

[@LiquidConceptsUSA]

We print custom film. www.liquidconcepts.com/custom-film-development Answers many questions about custom film.

[@michaelthiessen584]

Is it possible to use your factory paint scuff and use a bd 500 clear basecoat to hold the ink ?

[@bdbame]

I want to dip my goalie mask but i dont want the dip the whole thing. If i tape a portion of the mask off do i pull the tape immediately after the dip or do i pull the tape when it is completely dried and ready for clear? Great video BTW!

[@joel1gamebeast482]

Helmet come apart?

[@damenleon7541]

How do you properly prep a metal object for dipping and base paint?

[@melodynavarro2675]

Hello what is the best film product for motor Cycle.thank u

[@johnnyfuhlhage9776]

What temperature do you rinse after dipping

[@brandonlovett604]

Can you dip gun parts without painting first? Like a cerekoted handguard?

[@jeffmay1024]

What about wood? Will it work well after I paint the wood? Thx

[@doratheacarpenter9424]

Im interested in learning this techniques but afraid to give it a try What would you suggest trying out first?

[@LiquidConceptsUSA]

I would be sure to start small! Get a few smaller items that you don't mind if it doesn't turn out the best. It just takes practice, practice, practice!

[@stone2848]

Can i get the steps and a good tank size to hydro dip deer skulls before i go out buy the wrong tank ?

[@markexley35]

what about just black plastic trims inside the car do you have to paint them ?

[@henryhokeeann8765]

Hi,, why film seem like stick at edges.. didnt not tear off?? what was wrong??

[@amytaylor2002]

What do you do with the used water with the spray paint in it when you are finished?

[@LiquidConceptsUSA]

kzbin.info/www/bejne/n6LJqI1qbsZ4g5I Hope this video helps answer your question ! Thanks for watching !

[@killsalltires156]

Do you use a specific hydro graphic or u make your own? This all brand new and I have a business idea. Thanks in advance!

[@LiquidConceptsUSA]

Both!

[@kirkcoomes1915]

would you consider using a sand blaster instead of just sand paper?

[@LiquidConceptsUSA]

Yes! We prefer a sand blaster over sand paper but for most it might not be feasible starting out! We use a sand blaster daily in our shop

[@hhhhhh2062]

Sand your clear b4 you dip,the scratched surface will allow for the film to stick

[@QUADDAMAGE07]

Thanks....you saved me. I was going to hydro dip my red bike parts.

[@LiquidConceptsUSA]

Glad I could help.

[@SBMotowerks]

Do you have any of the activation sheets available?

[@LiquidConceptsUSA]

liquidconcepts.com/diy-dip-kits/ This is a great place to start.

[@sucre26]

Wich is the best way to rinse after dipping? Cold water..or hot water?

[@LiquidConceptsUSA]

You can use cold or luke warm water. The cooler the water the longer it will take to rinse but we do not recommend using HOT water. Luke warm does perfectly well

[@sucre26]

@@LiquidConceptsUSA thanx 🍻✌️

[@WeirdJerz3y]

I just watched video by All Things Fun Hydrographics, and he said you dont have to tape it. And it shrinks back down. But i want to get it right so you think 2 tape strips is good?

[@LiquidConceptsUSA]

Every film is going to be different and react differently. Normally you do not have to use tape but there are times that tape does make it easier to get the film in the water and contain the film if you do not have dams. Since we have a good divider system we normally only tape 2 sides on the difficult films.

[@WeirdJerz3y]

@@LiquidConceptsUSA thanks for the reply. Very helpful. Trying to get better at dipping. Love your videos. Thanks again.

[@jimmy29jamz1211]

Was told the speed shapes are different and don’t need to be painted, however do the need to be scuffed?

[@LiquidConceptsUSA]

The black & white speed shapes are ready to dip. These speed shapes are made of a durable ABS plastic resin for strength and also adds a great benefit that you can actually dip directly to these with no paint or primer needed. Hope this helps.

[@F82_332]

one question i have is how long after until clear coat, when it’s fully dry?

[@LiquidConceptsUSA]

It's dry to give to the customer in 24 hours. It is fully cured in 60 - 90 days. Hope that helps.

[@peter_W91]

How many of coats of primer should you do…. Just one?

[@blitzcontrollerz988]

I keep getting bubbles on my plastic piece I'm dipping. Then it dries with bubbles and or they pop . What am I doing wrong?

[@richiesilvestre461]

Why do they spray on the up side of the film? Is it an adhesive or water?

[@LiquidConceptsUSA]

Once the film is on the water we spray a hydrographic activator that liquifies the film

[@Hammerback972]

I was gonna dip a rifle stock. Aplain black synthetic, cheap rifle stock, never plan on selling, wanted to dip it camo, now I’m not so sure. Sand, buff, polish, pearls... no. Have paint, primer, tub for appropriate temp water, and rinse area and the willingness to try. Also picked up a can of clear coat just in case. Felt fairly confident in the project until now. Oh well.

[@LiquidConceptsUSA]

There is a lot to it but not every job will need buffing, pearls, and such :) Some are definitely easier than others and some are harder

[@delonv9518]

When I dip flames with skulls film getting Crack why is that please help?

[@KINGBREAKBARREL]

I JUST DID A DIP WITH DOLLAR BILLS AND MINE CRACKED IN SOME PLACES AS WELL🤔

[@jerrylunceford2079]

When you screw it up what do you have to do to start over?

[@LiquidConceptsUSA]

Start over & give it another go !!

[@AnToNiO98389]

i’ve learned a lot through trial and error, just did my fourth dip and it came out way better than my first, but still far from perfection

[@bigduke178]

Do u have to sand your stuff

[@Hammerback972]

My film and activator is coming UPS today, look forward to dipping my rifle. Either it’ll be great, or hot garbage.

[@robertmonkhouse1912]

Where do you get film

[@LiquidConceptsUSA]

We actually sell hydrographic film. www.liquidconcepts.com

[@chrishalliday5130]

Can you get bad activators? Ie cheap brands.

[@LiquidConceptsUSA]

There are activators out there that are not as good as others. I would recommend purchasing your products from a company that stands behind their products and offers support.

[@ehsaanwaheed1223]

Please sir why come bubbles

[@jesussantibanez6711]

👍👍👍👍

[@ObiOsama]

I’m hydro dipping my ps5 for the first time wish me luck it doesn’t have to come out great just come out good that’s it that’s all I’m hoping for

[@LiquidConceptsUSA]

Good Luck !! Hope it looks great !!

[@maidenfan237]

hes right its not easy first try i did came out good last 4 tries just sucked so what im saying is first try was beginners luck

[@AndrewVanDay]

re mistake #2; Repaint the part. This would be a good time to mention what kind of paint to use - matt, gloss, base coat, etc - there must be paints that are very good and some that are unsuitable, and also to use a primer, normally etch.

[@barbaralefrancois6699]

I want to learn this but don't even know where to start

[@JUSTNATUREOFFICIAL17]

don't start bro. Don't waste your fuck1ng Life.! Avoid drugs

[@dedseckOS]

Just buy their stuff and start doing it. Need to start somehow

[@pistoFF]

nothing about water temperature ? :(

[@LiquidConceptsUSA]

Water temperature is recommended at 80-90 degrees! This simply wasn't one of the top 5 mistakes we see made but definitely on our top 20 list :)

[@isaiasviana3946]

Traduz português Brasil

[@LiquidConceptsUSA]

You may try to see if KZbin has a way to translate this. I am sorry but we dont have a way to translate this at this time.

[@righteousdavis777]

I just screwed up my first pair of Jordans😖😖😖💀💀💀

[@LiquidConceptsUSA]

Oh no.

[@tonycip6844]

Man I like the videos, but I have a short attention span and you ramble on too much. that could have been a 5min video, or you could have added a little example video clips of the things your pointing out. you say prepping is the most important thing , how about a little prep before you make a video, like turn off the phone ringer, or maybe a little editing ..

[@AB-dm8nt]

Dude says dull side, then switches to shiny. Also did the sticky test twice because the first time did the opposite. I’m more confused for watching this. I don’t trust this guy, but who knows, maybe he was right more than 50% of the time?