TOP 5 Offset Tool Tips - Vectric VCarve, Aspire, & Cut2D Quick Tip

In this quick tip, we take a look at my top 5 tips for effectively using the offset vector tools. This works in Vectric Aspire, VCarve, and Cut2D.
Tips of this video:
0:00 - Intro
0:07 - Offset Tip 1: Use Layers
1:49 - Offset Tip 2: Deleting Small Parts
3:50 - Offset Tip 3: Curve Fit
6:07 - Offset Tip 4: Big Offset Trick
10:14 - Offset Tip 5: Vector Boundary
Vectric Master Training Course:
bit.ly/vectric-course
​Live Weekly Vectric Training:
bit.ly/livevectric​
My Bit & Supply Recommendations:
embed.kit.co/LearnYourCNC​
Vectric Tips & Tricks Facebook Group:
/ vectr. .
CNC Training Courses:
courses.learnyourcnc.com/​
Find me online:
■ Website: www.learnyourcnc.com​
■ Instagram: / learnyourcnc​
■ Facebook: / learnyourcnc
​■ KZbin: / learnyourcnc​
■ Blog: www.learnyourcnc.com/blog​
#tipsandtricks #vectrictips #learnyourcnc

[@LearnYourCNC]

Want to become a PRO at Vectric software? Check out my Vectric Master Training Course >>> bit.ly/vectric-course

[@lylet100]

Love watching your tips, you can never see them enough. Even though I have your class I still watch all your tips. Over and over. Thanks again

[@Meyerwoodworks]

Thank you! I just did a curved offset yesterday and was fighting with the million nodes it created. I turned then all to smooth just to run a test piece but now I know how to permanently fix it!

[@davecable3104]

Cool like that big offset tip!

[@stevegronsky8904]

You're just full of handy little tidbits! Thank you.

[@LearnYourCNC]

My pleasure!

[@badgrandpa8602]

Great video as always. I believe that the reason why there are slight "non straight lines" when you are shrinking from the 2" offset to the .125 offset, is the "S" and the number "4" are actually taller than the other letters on the top line. I would suggest checking the actual sizes of each letter to ensure they are all the same height, unless you wanted to have the taller letters of course.

[@martymitchell9855]

Awesome tips!! Thank you!

[@michaelmathews8974]

More great tips! I love the work you're doing on this channel! This is definitely my goto place when I need help with Vcarve Pro! Thanks for sharing all these great tips! So helpful!

[@unclebob8746]

Great tips! Glad I found your channel. Subscribed.

[@LouAdzima]

Excellent Tip! Thx

[@chuckmoney1688]

Thanks, very concise .

[@VFORCEJOHN]

Faster to highlight the vector and select the CREATE BOUNDARY TOOL. Rubber band positive value offset for a smooth profile around it all. Or negative value for inner boundary negative value. Or just create boundary. To create a rough pass to profile use my formula. (Tool diameter/2) +(final pass clearance/2) and then tha s your offset number. cut ON line for exact. 1/2 bit = .500 Clearance at 2%= .01 .25+.005= offset of .255. This leaves you with oversized by .005 which is perfect for a finish pass with .5 tool Final cut is then selected on original vectors to finish quick and easy.

[@BrianW2979]

Great tips, thankyou

[@fsballer]

How do you get the vectors to be a certain width? I would like to make 5mm tool paths for my CNC to carve. Thank you for your help! Your videos are very informative!

[@JamesSchexnayder-ge5qq]

Thanks!

[@higherstandardspc]

Very nice video, I like your videos they are easy to follow : )

[@LearnYourCNC]

Thank you, I am glad you like them!

[@Mtbeaver9]

Great video. Can I ask how ro use offset with stacked text? I have tried to do stacked text with a v carve tool path but my top text gets cared very small and leaves the top letters different witdths. Is there a way to keep my top text the same size? Thank you.

[@marclebail9948]

Hello, do you know how to use this tool for Lamello P system kzbin.info/www/bejne/rmPQm4WrmtJphKc

[@martyjosephson4937]

Thank You