Thanks again guys. I don’t know too many industries where there is this level of attention and support. Much appreciated.
@diydetailofficial7 ай бұрын
You got it! Thanks for your support, we're just getting started:)
@zeroconduction7 ай бұрын
It's not exactly your typical flag tipped brush, but I bought a curveball brush and it's easily one of my favorite tools to use. It makes cleaning an awful lot of surfaces a breeze.
@diydetailofficial7 ай бұрын
Good to know!
@derekpham28497 ай бұрын
Detailer's helpers belt is a must for mobile or working on large vehicles. Carrying a towel or two with the sprayer of your choice without the need for a cart or walking back to pick it up.
@diydetailofficial7 ай бұрын
Good plan
@stephenlouden4807 ай бұрын
drill brush assortment from very soft boars hai to hatd bristle for weather mats save your wrists while detailing..i use a cordless screwdriver with brush end tips to clean everything inside the car no more shaking my hands and wrists around to interior clean. a must have!
@diydetailofficial7 ай бұрын
Great tip!
@PolishedMobileDetailing5037 ай бұрын
That green brush has been paying the bills over there for years 😂 great job guys ! These are excellent tips.
@diydetailofficial7 ай бұрын
Thank you.
@nicholosk72807 ай бұрын
Thank you both for the video. I like how you explained each item as you applied it to the cars.
@diydetailofficial7 ай бұрын
you're very welcome!
@locar127 ай бұрын
Love the red shoes Yvan! 😄 Hope to get a hold on that legacy sponge soon as the order arrives. +1 on the pad washer. You'll have the assurance of polishing your car with a clean pad!
@diydetailofficial7 ай бұрын
Thank you
@jimmystabler37787 ай бұрын
Today I finally ordered 3 kits, rinseless, incredible suds, and interior kits. So excited for it all to show up.
@diydetailofficial7 ай бұрын
Thank you
@duanepassey59317 ай бұрын
+1 on the pad washer. Even without it, I was pleasantly surprised at how well DIY Rinseless Wash cleans pads-so far the best pad cleaner I’ve used.
@diydetailofficial7 ай бұрын
great to hear!
@kimnewling57287 ай бұрын
Boy, the pad washer is very nice. I just hated washing pads by hand after a full day of detailing and polishing. Cleaning the pad as you polish along is great! I do use the little packets of soap that are sold with the washer. Good stuff.
@diydetailofficial7 ай бұрын
Thanks for sharing
@0-60STYLE7 ай бұрын
That pad washer is my next big purchase for sure. The squeezing method works really well but I want to try to clean my pads without getting them all the way soaked. I clean it more often now thanks to these videos, I didn't realize rinseless in a bucket is all it takes
@diydetailofficial7 ай бұрын
our Rinseless is quite powerful so it does work great, but the pad washer is a step up for sure. Thanks for spending time with us today, see ya on the next one!
@johnough48937 ай бұрын
Another enjoyable and informative video. I especially liked you promoting the use of a brush. Like millions of others I was very sceptical about brushes on paintwork, but in one of your other videos, Ivan, you used a brush and I think you said (if my memory serves) if used sensibly with plenty of lubrication it wouldn't scratch the paint. Since then I now use a Vikan* brush on the underside of the car (sills/rockers and other hard to reach places) and a Chemical Guy's brush on the wheels, all without any scratching problems. So I was delighted to see Nick using the brush as well. I have, since discovering rinseless washing, been using sponges. Where some people use mutiple mitts or towels, I use mutiple sponges: the Ultra Black on the top of the car and windows and lights. BRS or BGS on the main body of the car, and the Legacy on the lower half, as it is easier to grip when crouching down with little danger of dropping it thanks to its shape. By the by: A couple of weeks ago I got my first bottle of Ceramic Gloss. I believe it to be the best drying aid I've used and it puts a great shine of the car as well. You are on to a winner with it, so please don't ever change the formula. * I haven't come across a softer brush than the Vikan. It is a pleasure to use.
@diydetailofficial7 ай бұрын
Thanks
@superado2k7 ай бұрын
Here for all the knowledge!
@diydetailofficial7 ай бұрын
Thanks for stopping by!
@bradstevens21136 ай бұрын
Love you guys. Awesome info. Greatly appreciated. Oh and it’s soda!! 😅
@diydetailofficial6 ай бұрын
Thank you.
@Omar-qf5mi7 ай бұрын
Great timing! I’ve been actively looking for ways to save time with my rinseless washes to get to at or under 15 mins
@diydetailofficial7 ай бұрын
Glad I could help!
@stevedeneckere60097 ай бұрын
Love your channel and products
@diydetailofficial7 ай бұрын
Thank you!
@johnfontaine12577 ай бұрын
Thanks for the great content. I always learn something new.
@diydetailofficial7 ай бұрын
Thank you
@maryhoffman25477 ай бұрын
Excited for these tips!
@diydetailofficial7 ай бұрын
Thank you
@alkanaalkena39187 ай бұрын
I'm still saving money for buying the System 4000 Pad Washer. It's quiet expensive here in Indonesia, sells around $300. I want to buy a nice rotary machine first. Thanks for the efficiency tricks!
@diydetailofficial7 ай бұрын
Sounds great!
@donaldgreen92927 ай бұрын
I am roughly 5'9" with a gut, I would add a adjustable height platform. a seat creeper for wheels, tires and lower section of vehicles.
@diydetailofficial7 ай бұрын
True
@edprince24986 ай бұрын
I just purchased my first Black vehicle and had it professionally ceramic coated. I didn't realize what I was getting into with a Black truck. I'm assuming I can use the brush and sponge you talked about on a coated vehicle? I would be using it with Opti pro M-wash from a foam cannon. Great content, professional and easy to watch. I've learned a lot so far. Subscribed!
@diydetailofficial6 ай бұрын
Thanks, yes those are fine
@Joey-kv6qr7 ай бұрын
What are your thoughts of using distilled white vinegar as a glass cleaner?? I had a situation where I had water spots that I didn't remove for a few days then I used chatgpt to help me solve this with home products and it 100% worked. It recommended 1:1 ratio Distilled white vinegar and water. I've never seen glass look so very clean with any other product like this before its like the glass is not even there anymore, this also worked great with the side mirrors. I was thinking of even adding a bit of ONR to make it safer to us with microfiber towel or sponge. Once water spots are gone I wash once again with car soap and apply rain-x to protect & make hydrophobic again.
@diydetailofficial7 ай бұрын
If it worked for you, great
@JustS0meNO0b4 ай бұрын
I got a question, you know those youtubers that say 1 step is 50-70% swirls removal, and 2 step is 70 to 90. What would you say in that case for your wool pad cutting ability for one step and wool then yellow for 2 step? and yellow pad alone probably just works great as a paint enchancement.
@diydetailofficial4 ай бұрын
Percentages are hard to determine. On many cars the wool pad is all you need. The gold pad is a great one step pad.
@stevefischer1977 ай бұрын
Great tips!
@diydetailofficial7 ай бұрын
Glad it was helpful!
@davidruggles9967 ай бұрын
Great video guys! Is there a reason not to put a link to Scott Grave's kegs in the description on your video? Keep up the awesome work with videos, customer service and great products. ❤
@diydetailofficial7 ай бұрын
Who’s Greg?
@davidruggles9967 ай бұрын
Hahaha, sorry I tried to type Grave's and autocorrect made it "Greg". I edited the comment. 🤦♂️My bad! @@diydetailofficial
@diydetailofficial7 ай бұрын
It is in the description, kzbin.info/www/bejne/a563hJShlNqDfMksi=kB7XxY-3dPReI_y4
@booboocushion307 ай бұрын
Thanks fellas! As soon as you said "pop" I knew where you were from 😅
@diydetailofficial7 ай бұрын
lol
@erichughes61197 ай бұрын
A mobile detailer. I'm doing first, a rinseless wash, and then the wheels. I really want to not use my generator and pressure washer on the wheels because my generator is loud. I'm looking at the rinse kit cube, but it is expensive. A good way to rinse the wheels without using your pressure washer when doing a rinseless wash would be awesome. Can you compare the rinse kit with your keg for this job? If you are not sure what the rinse kit is, please look at it.
@diydetailofficial7 ай бұрын
Do you have a link?
@1bballplayer20115 ай бұрын
I made a diy ringer for this exact situation. Look up diy portable rinser here on KZbin and you can find a bunch of videos to follow
@1bballplayer20115 ай бұрын
I made mine out of a Harbor freight 2 gallon sprayer and a plastic rv blow out plug. The small end goes into the hose and the large end connects directly to a regular spray nozzle. I glued mine in the hose to make sure it doesn’t come loose. Cost me less than 20 dollars.
@drive2siva7 ай бұрын
Looking forward to this ❤
@diydetailofficial7 ай бұрын
Hope you like it!
@davestewart91467 ай бұрын
Great video, thanks guys 😁👍
@diydetailofficial7 ай бұрын
Glad you enjoyed it
@joshuawrinn347 ай бұрын
what is that yellow DIY Detail polisher? when are they gonna be released?
@diydetailofficial7 ай бұрын
It will be available end of March
@Auto-Bots.Custom.Detailing6 ай бұрын
Where do you get your clear buckets?? I love them.. I’m not paying $400 for 3 buckets from OG…
@diydetailofficial6 ай бұрын
Local restaurant supply
@PAB-s1Ай бұрын
Great video! Can I use the IK foamer to apply rinseless wash?
@diydetailofficialАй бұрын
Yes
@rbakkify7 ай бұрын
I have 3 different questions 1. A waffle pad on a flat surface will touch less surfaces compared to a flat surface, but if you press the pad hard to the surface it will be the same But if the entire pad is covered with polish, you have a bigger surface covered with polish with the waffle pad When you polish on a flat surface, X procent of the pad is not in contact with the paint, and that pad Heat and pressure will increase the procent in contact with the paint And that surface now contains unused polish, if you now polish over corners and edges, this surface will come into contact with the paint So there are many variables to take into account. It would be great with a more technical video where you explain why and how in more detail 2. I have seen videos where Rupes shows how to prime their polishing pads You make draw a + on the pad with the polishing agent Then, on a black car hood, they show you press down the machine with medium pressure and speed 2 for 20 to 30 seconds This is to spread the polishing agent and get the pad warm If you compare this with the 5-5-5 method, you would think that the area that has now been treated will be different to the rest of the paint on the car Won't a "blank" spot appear there? 3. What polisher will cut the fastest? 5 inch pad and 32 mm orbit, or 21 mm orbit an 6 inch pad? A last thing Here in Norway people believe we have to use a degreaser to get the car clean And one company working with Feynlab coating tell me i have to use acid before i coat the car This guy are the European trainer for Feynlab I want to use all clean, but is not easy to get it to Norway in the 4 gallon What is the right answer?
@diydetailofficial7 ай бұрын
Thank you for your questions 1. Try both for yourself, you will then appreciate the value of a waffle pad vs a flat pad. 2 pad priming is a great way to sell you polish. 3 about the same when you factor in surface area vs stroke ( what company has a 32mm stroke?) If washed regularly no need for harsh chemicals.
@rbakkify7 ай бұрын
Tacsystem polisher DP-6500 32 mm DP-5500 25 mm, DP-5000 21 mm I have the gold standard polish and the yellow waflepads And the rinsless of course😄
@rbakkify7 ай бұрын
Thanks for det answers You guys are the only one teaching the right way to do things I love you guys😄
@diydetailofficial7 ай бұрын
Thanks
@rbakkify7 ай бұрын
But you do'tt give me an answer about 21 stroke and 6 Inc pad compared with 32 stroke and 5 Inc pad😊
@davefgs23997 ай бұрын
I have a question unrelated to this video, but you know, I'm really enjoying the rinseless process so I'm really trying to understand its limitations. I've seen you guys use various chems in a rinseless wash but I wanna see where to draw a line on "too much". Let's say I have a coated vehicle, I do my pre-treatment, I do my wash, but then I also need that little extra punch and I go for a second round using an acidic shampoo as a contact wash to unclog the coating. Will I be safe by just rinsing everything off with a pump sprayer and my rinseless or is it too much of an aggressive product to risk it? 🤔
@diydetailofficial7 ай бұрын
If you’re coating is masked by mineral accumulation, wash as normal, then use DIY Detail Water Spot Remover , its much more effective and efficient than an acidic shampoo. Yes you can rinse it off using DIY Detail Rinseless Wash, but a hose would be best.
@UGA.D7 ай бұрын
Great! What is the clear bucket with the red sidewall grit guards?
@diydetailofficial7 ай бұрын
Those are food service buckets
@user-yp3sg5yc1r5 ай бұрын
I have seen Ivan using a wheeled kneeler/chair. Is there info on those?
@diydetailofficial5 ай бұрын
It’s a prototype we are working on
@chriss39597 ай бұрын
Much appreciated!
@diydetailofficial7 ай бұрын
Glad to help!
@1stfrompuertorico5687 ай бұрын
Ready to roll
@diydetailofficial7 ай бұрын
Thanks
@jedward37 ай бұрын
What’s your opinion on pairing your yellow and wool pad with a forced action DA such as the flex 3401? Too much heat?
@diydetailofficial7 ай бұрын
It works , but because of the short stroke they are not very efficient tools.
@kennythomsonjr55537 ай бұрын
Will you ever carry & recommend a specific rotary polisher? Thanks
@diydetailofficial7 ай бұрын
yep! We have a rotary polisher coming out (along with a 25mm dual action machine) in March:)
@kennythomsonjr55537 ай бұрын
@@diydetailofficial sweet. I'll get both. Thank you for your response
@kennythomsonjr55537 ай бұрын
Can you say the brand?
@diydetailofficial7 ай бұрын
Yes, DIY Detail
@Workrelatedstufff7 ай бұрын
I keep hearing apc, all purpose cleaner and how to be carful with it but always see people spraying car sides and tires. What’s a safe apc to buy that I don’t have to worry about for pre washing cars and tires ????
@diydetailofficial7 ай бұрын
DIY Detail All Clean
@stevenv92247 ай бұрын
Great video guys like always👍🏻👍🏻💪🏼💪🏼 did you guys stop selling the IK on the site?
@diydetailofficial7 ай бұрын
Yes
@johneemmel86116 ай бұрын
Soda pop!!! There Yvan Everyone is included lol
@diydetailofficial6 ай бұрын
True
@PictureProStudios7 ай бұрын
I like the dungeon look. Just curious, why the change in the workshop ?
@diydetailofficial7 ай бұрын
We now own instead of rent
@highlandsautodetailing4 ай бұрын
Theres a fellow youtuber out there that claims the damp pad can create inconsistent paint correction, by effecting the way the polish creme is suppose to work. Whats your thoughts on that? I also noticed the often high speed rotation from cleaning after every section is really hard on the pads and seems to wear them out fast, the foam itself and the Velcro. Any feedback appreciated as always!
@diydetailofficial4 ай бұрын
That’s the opposite of our observations. Try both methods for yourself and decide which you prefer
@nadiussilva94167 ай бұрын
Honestly the biggest difference in being efficient I noticed was when I got a drill brush and steamer when it comes to interior jobs
@diydetailofficial7 ай бұрын
for sure! And compressed air is wonderful on interiors. I guess we really just focused on exterior washes/detailing for this video :)
@ajaysmind52917 ай бұрын
Great video! But I'm a bit confused on saying there isn't more dirt on the wheels than the rest of the car. Would you not consider brake dust to make the wheels dirtier?
@diydetailofficial7 ай бұрын
The brake design dust accumulates a little more on unprotected wheels, but if washed regularly, not an issue.
@warpig036 ай бұрын
What if you don't own polishing machines. Can it be done by hand
@diydetailofficial6 ай бұрын
Yes, but for less than $100 you can have everything you need to polish your paint at home. kzbin.info/www/bejne/mJWsf31jaLKWZrcsi=RSX3erXjU9nlAm2X
@chriss39597 ай бұрын
If you don't have a pad washer, could you still use just one pad if you use the bowl of rinseless for cleaning pads?
@diydetailofficial7 ай бұрын
Yes, watch today’s video for a more in depth look at pad care
@user-on8cl1ig5d7 ай бұрын
Pad washer is worth every penny I paid used one pad !!!
@diydetailofficial7 ай бұрын
Exactly
@user-ut3lb5fd5c7 ай бұрын
Awesome!
@diydetailofficial7 ай бұрын
Thank you! Cheers!
@Secret_Sun336 ай бұрын
What is a pad break? At 14:39 Ivan talks about a pad break on some DA's. Any link to an article or image to clarify? Thanks in advance!
@diydetailofficial6 ай бұрын
A pad brake is a mechanism that prevents the pad from free spinning. Most use a simple rubber piece rubbing against the backing plate.
@nejcpanic67047 ай бұрын
What exactly do you mean by lacquer paint vs plastics paint? Can you be very specific. Do you say that modern clear coats that are polyurethane based (right?) are plastic?
@diydetailofficial7 ай бұрын
Correct, modern paints are a form of plastic. Older laquer paints were an organic
@gogators57627 ай бұрын
Sweet!
@diydetailofficial7 ай бұрын
Thanks!
@dandydonslife98697 ай бұрын
Great program, what model rotary did you use?
@diydetailofficial7 ай бұрын
The soon to arrive DIY Detail rotary
@gunnsteinnjonsson91667 ай бұрын
I showed up too late. I set a reminder but didn't get reminded.
@diydetailofficial7 ай бұрын
Sorry
@KingRockets7 ай бұрын
Does the red pad have any cutting ability at all or it strictly all finish?
@diydetailofficial7 ай бұрын
A minimal amount of cut
@israelberrios20503 ай бұрын
Have used the damped pad technic but the night caught me and the pad didn't ever dry enough and it clogged like hell
@diydetailofficial3 ай бұрын
It can be cleaned
@israelberrios20503 ай бұрын
@@diydetailofficial by washing it
@diydetailofficial3 ай бұрын
Yes
@0-60STYLE7 ай бұрын
Wait... I have an industry breaking idea... I'm gonna use the legacy sponge for ceramic coat application... I gotta order one, I really like how it's cut like that, it would be perfect for cleaning my angly bumper
@diydetailofficial7 ай бұрын
You might need a lot of coatings
@kevinmorales29107 ай бұрын
I cannot find that pad washer anywhere 😭😭😭
@diydetailofficial7 ай бұрын
Unfortunately we sell out of our inventory quickly whenever it’s in stock
@neilhibbert52017 ай бұрын
O s f wing marked rear wing damage. 😂
@diydetailofficial7 ай бұрын
lol
@cfrontron7 ай бұрын
Old man going wonky...😂
@diydetailofficial7 ай бұрын
how so?
@DetailingMadeSimple7 ай бұрын
Great video. 💪🫡 I’m still working on getting the keg from Scott graves. Hopefully in the next few months 💪💪