Top 5 Upgrades Video Series #1 Installing an 11T Pinyon on the SCX10III JT Gladiator!

Video #1, Top 5 Upgrades Video Series For SCX10III
Installing an 11T Pinyon on my JT Gladiator!

[@williamdobisky9147]

Hey Trevis, I recently discovered your channel. I am a BIG fan! I think your videos are the most information packed and informative videos on the subject of RC cars and trucks. Keep up the great work and THANK YOU!

[@kayleenhooper2158]

Awesome job on explaining everything in detail loved it.

[@josephfinley1594]

Great video as always Trevis!

[@upgradedrc3697]

Thanks brother, I appreciate that. Just released another one 20 mins ago. #2

[@CRAZYBUILD349]

thank you , man !!!!!! a lot of information and great video footage to!!!

[@binplays6991]

Smashed the like when he pointed at me 🔥

[@andyjones357]

That servo wires touching the motor can scares me bad with my luck I would melt them and short all out

[@ed0c]

I put in 10t with 10turn Holmes crawl-master sport 40$ and my bronco is INCREDIBLE. I am debating on locking diffs though. I can’t find a lot of info if people prefer it in crawler or not

[@rcaxialscx10]

nice video but you should mesh it with paper so it's not too tight

[@upgradedrc3697]

I usually do, but I have kinda gotten the feel for it also.😎👍🤙

[@rcaxialscx10]

@@upgradedrc3697 oh yeah that's good man

[@abelhansen3879]

I put an 11 tooth and it was good with the 1800 fusion. But now ice got thr 2200 axe and it is so loud I'm worried it's hurting something. Should I go back to the 14 tooth

[@upgradedrc3697]

You could try running the 14t, but I don't think it will be any more quite. The motor is just loud. But make sure the gear mesh is correct or you will do so damage.

[@CrawlerRuth]

Very good video. I would of added that it would be a good time to use motor spray and clean out the motor and lubricate the motor bushings.

[@upgradedrc3697]

Ya, good idea. But, mine only has about 30mins run time lol. Thanks for the comment.

[@daveredding9957]

Hey Travis, After fighting for about 15 minutes I got the Allen screw out but now I can’t get the pinion to budge. Any thoughts.

[@upgradedrc3697]

Did it spin on the shaft or is it just locked on?

[@rodgalley9209]

Good series but I have to ask where did you get the 11t from? I can only find a 13t 48dp as the lowest. For a 11t you need a 32dp. So not sure where to get one from for a 48dp.

[@upgradedrc3697]

My hobby shop had one

[@mollyys-bf6740]

Axial AX30722 MAX-D EXO Pinion Gear 32P 11T Steel 3mm Motor Shaft, thats the one you need man

[@rchobbychannel-sg-88]

Motor shaft what size..? I need to upgrade my pinion gear too..

[@upgradedrc3697]

Sorry, I'm not sure. i just asked for an 11thooth pinyon for the scx10iii at my local hobby shop. i guess it depends on what motor you have. mine is stock.

[@rchobbychannel-sg-88]

@@upgradedrc3697 thanks for reply..mine is stock too.. thats no much info about the motor dyns1216 motor shaft size..

[@upgradedrc3697]

@@rchobbychannel-sg-88 Everything I found says that the Axial scx10iii has a stock motor shaft size of 3mm

[@rchobbychannel-sg-88]

@@upgradedrc3697 thanks for your help.. 👍

[@427walrus]

Great video. Is the 11 tooth pinion 48p or 32p? Any chance you have a part number? Thanks. 👍

[@upgradedrc3697]

It's a 32 pitch 11t Pinyon gear from RRP, sorry I don't have the part number .

[@mredias3762]

@@upgradedrc3697 Robinson Racing Products 0110 Pinion Gear 32P, 11T (Amazon $7.39) Amazon link; www.amazon.com/Robinson-Racing-Products-0110-Pinion/dp/B0006O7TBS

[@upgradedrc3697]

It's 32 pitch. Sorry no part number

[@jledesmaf1]

Why can’t you flip it around so the wire is on the opposite side??

[@upgradedrc3697]

You can, it's just the way I wanted to do it.

[@brads2240]

have you done the two speed trans upgrade? i have been debating on giving it a shot

[@upgradedrc3697]

I have not. But I bet it would be cool.

[@brads2240]

@@upgradedrc3697 havent seen much on it. thought itd be good. having the higher speed for walking trails, then the low to crawl. love the videos by the way, awesome job

[@upgradedrc3697]

Thank you, I am building a VS410 Phoenix right now with 6% and 33% overdrive. So maybe that will get me into wanting a 2 speed for the Gladiator.

[@brads2240]

@@upgradedrc3697 will let ya know if i do it before you. have to replace my servo for the dig feature, went bad. just gonna use that one for the 2spd

[@ashtonpowers8563]

What bumper is that

[@upgradedrc3697]

The front is an RC4WD bumper from an scx10ii renegade, and the back is an RC4WD off a Trx4 lol

[@codylee597]

@@upgradedrc3697 I can’t find that front bumper, could you possibly send a link? I love that front bumper and it would look so good on my gladiator

[@upgradedrc3697]

I don't have a link, it was something i found in an old discontinued box of parts at my local hobby shop. But, the part number is Z-S0434 made by RC4WD Good Luck!

[@codylee597]

@@upgradedrc3697 thank you!

[@ethan1995]

@@upgradedrc3697 how do you mount that bumper? I was looking at doing one but with the 10.3 having the hidden clips it doesn’t look possible.