Top 6 Electronic Project Using 5mm RGB Led Z44N LDR Relay BC547 & More Eletronic Components

[@eugenegrebionkin]

Advice for newbies - NEVER REPEAT THESE! Using mains voltage directly is extremely dangerous. Always use galvanic separation from mains - e.g. transformers

[@Ev-wj3lm]

THANK YOU! Such a shame that these videos are permitted, these are real death traps. There are so many excellent EE channels and they chose to watch some Indian who are as clueless as them

[@tony4624]

I took up basic electronics as a hobby about 2 years ago. My hobbies are things I enjoy...and getting electrocuted by a mains supply is NOT something I'd enjoy. All of my electronics tinkering is firmly low-voltage :)

[@kronos1999]

@@Ev-wj3lm can you suggest some good channels?

[@adrpvmatlggs]

@@Ev-wj3lm yes true but still there are many good indian tech channels right?so why you are teasing indian?

[@mdrashid3822]

Ek bar decklo kzbin.info/www/bejne/onecdZyKqKyYn7c

[@GRAHAMAUS]

@1:25, that resistor is dissipating .85W, meaning it is seriously overloaded. It's a dangerous circuit -- never connect stuff directly to the mains.

[@Ev-wj3lm]

don’t understand how such videos are permitted, look at the numbers of clueless people in the comments… It is a death trap

[@Scubado199]

@@Ev-wj3lm Most DEFINITELY agree, one would need an electron microscope to see the size of their brain.

[@extre4mPK]

4:24 gate in air, can turn off from any wind blow or air discharge, better use trigger scheme or thyristor scheme or attach gate to + and - by depletion mode transistor or other voltage controlled dynamic resistors like tunnel diodes(will keep gate charge because current bigger on element what have lower voltage)

[@ppmedia952]

@,,

[@ppmedia952]

,

[@Iceice69420]

At the first one , you can use a 12volt adapter rather than using transformerless adapter that shown in the video. it equals 12v because the led is connected using series and they use 4 meaning 1 led = 3v, 3 x 4 = 12 meaning it can powered by a car battery and also an adapter. I'd recommend you all to use the 12v adapter

[@alexkirlian]

Mesmo assim, seria necessário um resistor de valor baixo, de 47 ou 100 ohms em série. Ou ligar 5 LEDs em série, no lugar de 4.

[@Bandicoot803]

1:32 - This circuit looks similar to the voltage doubler where you replace two diodes with DC capacitors. I got some 30V DC out of a toroidal 11V 4A transformer by using 25V 1000µF capacitors.

[@imunkown6365]

How many terminals do Your transformer have? 2-3?

[@Bandicoot803]

@@imunkown6365 It's a 2-terminal-output transformer.

[@extre4mPK]

its a middle-point 2 diodes rectifier with 1 active coil in any time what produces 14v as part in full bridge rectifier what produces 28v with 2 serial connection active coils in any time

[@mdrashid3822]

Ek bar Deck lo kzbin.info/www/bejne/onecdZyKqKyYn7c

[@mdkaucher6598]

ভাইয়া আপনাকে ধন্যবাদ আমি কিছু শিখতে পেরেছি।

[@عقيلالعبيدي-ض6ض]

احسنت ستاذ 🌺🙋‍♂️💕❣️💖👏🌷🥀💐🌹

[@mandirimotorst5847]

👍👍👍👍👍

[@sangtaobuzz]

Tuyệt vời quá bạn ah, đã bấm đăng ký kênh bạn.

[@faisal5370526]

Good sharing i like your video 👉👍👍👍👍👍👍👍👍

[@mandirimotorst5847]

👍👍👍👍👍👍👍💟

[@wildzoneyt50]

Really I saw this without skipping I like Electrical Skills And I'm doing E.E ❤️ from WB(IND)

[@Ev-wj3lm]

You’re doing EE and watching such shit?

[@amisingaboro1050]

Terima kasih bang,tutorialnya sangat berguna.semangat....

[@PanglimaPejuang]

Berbahaya itu om, dia demo nya langsung ke listrik PLN, bisa kesetrum,bisa terbakar pula , harus pakai Trafo untuk menurunkan tegangan 🙏🏻😀

[@CITY_SPECTER]

Please add a short description of what each circuit does so others who don't know what's going on can understand... other than that great video I liked and subbed to you 🔥🔥

[@Ev-wj3lm]

He doesn’t know either. This thing is not only poorly designed, it is a death trap for anyone. I don’t understand how it’s permitted

[@Scubado199]

@@Ev-wj3lm I agree.

[@mariobitz]

@@Ev-wj3lm Hey...It is the classic voltage doubler. It is a very old circuit.

[@perwestermark8920]

People who do not know electronics would get more use out of the video if you describe what the circuits does. Without understanding how a LED functions, it isn't obvious how the voltage divider functions to allow the LEDs to be powered from mains. And neither is it obvious to a beginner how the capacitor charge/discharge is used to control the transistor to create a simple timer light. How the switch can charge the capacitor and that the transisyor turns off when the capacitor has been discharged through the resistor. A beginner would also not understand that R*C affects how long the lamp will be on, and that a bigger resistor makes the discharge slower. Or a larger capacitor means more energy to discharge. So either component can be changed to change the time.

[@Ev-wj3lm]

People who are interested in EE should watch real channels (there are so many excellent ones!) and not these clueless indian ones. They do extremely sketchy and dangerous stuff. Of course they couldn’t explain! These exposed live wires are a death trap for any inexperienced beginner

[@Scubado199]

@@Ev-wj3lm Could not agree MORE!

[@Sanju220-t2k]

Thanks 🎉🎉❤❤ you're greatest ❤️ low costly electronics master😊😊namaste 👍

[@mutiaraofficial]

Terimakasih boskiu semoga bermanfaat aminnnn

[@sathyamurthy.]

👏, good presentation

[@ricardogabrielespinosa1612]

1:06 is connected to 110v or 220v ?

[@cuqubako]

Ya ese invento yo lo había hecho primero que tu y funciona por la descarga del condensador que mientras este con carga mantiene al transistor abierto y el tiempo de encendido depende del microfaradiaje del filtro.😀

[@luiswicho5301]

Así es carga y descarga.👍🏻

[@cengocengo562]

Kardeşim eğer sen sayaç durduran bir sistem yaparsan ( gaz-elektrik -su gibi ) on numara damasın demektir o zaman derim ki sen bu işi biliyorsun :D

[@wolfgangboettcher3126]

Sehr informativ und standhaft

[@Mahesaparabolacctv]

this is a creative idea, great friend

[@inspirasichannels7178]

Bagus sekali untuk di buat di rumah y om

[@JohnPlayer_7979]

The handiwork is exquisitely beautiful 👍🏻

[@Ev-wj3lm]

Yeah I too love exposed live wires… said nobody ever

[@Scubado199]

That's ALL one can say good about it. This project is incredibly dangerous. The builder and all those that condone this type of stuff should take up something safer .. like needle work.

[@dilsonbezerra1073]

Friend, in this first video, is the voltage of the capacitor 25 Volts? Will it support the 220 or 110 volt supply? and the socket that you put, to turn on the device, is it 220V or 110V? Thanks

[@luiswicho5301]

Yep, because of resistance

[@Ev-wj3lm]

Don’t do this please, it’s incredibly dangerous

[@electrictechnicals]

Right

[@pubshahghighlights.3169]

Bro I am fallo for all videos. Nice video

[@mandirimotorst5847]

👍👍👍👍👍👍👍

[@franciscodeassisrodriguesa3865]

Legal vou fazer um desse, quero aprender a fazer assim brincando.

[@dilip.dattatrayraje6291]

Nice projects. 👍

[@Ph.hati4]

Makasih banyak ya, dah bagi bagi ilmu

[@gafurjabborov9524]

Способ понравился ваш видио Нада зделит получится или нет спасибо большое за видео класний.

[@ErsinFahredin]

Nice Tutorial, thanks!

[@franciscocaninde638]

Show de bola aprendo muito

[@listrikeksperimen353]

Mantap karya wow karyawow

[@afifwae7740]

😱Good and interesting content. Thank you for inspiring me😍

[@santiagopaz369]

Muy buenos tus videos mi estimado amigo y pregunto, entre ésos videos tendrás uno de cómo hacer un tipo de switch táctil para auto? De ser así me podrías enviar el enlace porfavor? 🙏 Te lo agradecería mucho, saludos...

[@ayahsadam9817]

Nice sharing

[@drcowan3468]

"I think I need to calculate the proper series resistor for this LED," said nobody ever...

[@redmist4963]

You just have to believe

[@ShandiWan-zh7qs]

Mantap jadi kedip kayak lampu sein mas y.

[@abbsm3300]

Nice idea continues bro 😊

[@jigarwiremanelectrical2490]

Sir ek muje idea bataiena Aapana 5 step he vo dhire dhire band ho raha he Me re esa Bana he ki dhire dhire chalu hona chaie batana sir please

[@mamikponorogo2843]

Kreatifitas hebat 👍👍👍

[@Studs_Studio]

Does number work with an LED and no resistor and connected to battery?

[@NguyenNghiemPhuong]

Tay còn, mắt còn...thì bạn cứ làm theo. Chúc may mắn.

[@alifm9240]

Good job master 👍👍👍

[@Sukamtoragilpatimuan]

Mantap banget nih

[@deafmonk24]

project 4, the blinking light. did it blew up like electroboom 's did? what it is, the compactor he used expanded and blew up, used a red led light with compactor

[@kreatifikutan]

Good, thanks master 🙏🙏

[@garipsmile]

❤❤❤❤

[@Uvengineer]

Brother, where will I get information about all these electrical components, I have all this but I do not know about them, please tell me. This will help me a lot, where can I get complete information about them??? 

[@muslimsharki8966]

you can search about them by taking the model number written over every component , for example " NE555 specs and data-sheet " "NE555 circuits" ..."NE555 projects"

[@eitantal726]

Better title: "Projects to do when you don't value your life all that much"

[@Scubado199]

A GREAT description.

[@تدبّر-ع6ظ]

are these 940nm ir leds?

[@RixtronixLAB]

Nice video clip, keep it up, thank you for sharing it :)

[@dz-abouttechnique1849]

Nice video! 👍

[@badboy-iz2qo]

Duniya ka best video 👍 kzbin.info/www/bejne/nKSvloVmh9xnfqM

[@studionada1397]

Luar biasa....

[@garipsmile]

❤❤❤❤

[@jeet8580]

But he connected diaode from n junction first!! How's that possible?

[@UdayaRai-mo4ur]

Udaya💡💡💡💡💡💡💡💡

[@anushkasrimal7764]

Is 1st one dangerous

[@jeyhazieldiazgonzalez7575]

Me gusta mucho el primer circuito que hizo Me gustaría que hiciera uno que se pueda conectar a una fuente de alimentación de CC de 12V

[@realisaarnido1383]

Bc

[@ВикторФомин-з6н]

25 против 250V сомнваюсь, 4 диода по 3В =12в / 220В =⚡

[@Red-um3uj]

In first RGB light experiment can use white light for old damged led light , maximum how 5 mm led can use in this circuit

[@Rock4altime]

number 1 diagram please, if I connect 50 led in series instead of 4 will it work?

[@CEKINK86]

I like this experiment, good luck

[@jaimemoisesmonteirojmtecno5553]

Boa sorte mano foi bom ver

[@komalpawar3136]

Whats the projects names please?

[@budisantosochanel]

good,thanks

[@vilmarjosedealmeida4214]

Keep It up your channel. Where are you from? I'm Brazilian and I think all your projects are inclive. Thank you very much.

[@kjm-ch7jc]

A spoken word is worth more than silence.

[@electrictechnicals]

Yes

[@fire_grisu]

One question, where can I get the LED ground plat?

[@frozen4402]

Using nail cutter to cut the wire😅😅I have also used nail cutter 7:27

[@minhnhat20229]

Hay đấy, đã bấm đăng ký kênh

[@herrizendmusic8711]

Mantap boss👍👍👍👍👍

[@ubaicreative86]

Nice...👍👍👍👍

[@pcbland7850]

Good job my friend keep it up ❤❤❤❤❤❤

[@Dafitkreator]

Mantap. Menginspirasi..

[@TN_Electric]

very good thank for sharing

[@enriqueatala2567]

Hi, is for 110 or 220 Volts the first project?

[@MG-hf3zq]

Please dont do either! Take a lower resistor and use safer voltage

[@Ev-wj3lm]

Yep this thing is a death trap, thank you for saying it!

[@DerHamborger]

The point is, that there is no shop anymore, where I can buy these parts. All I know is Pusterla in Zürich which is 800 km from my hometown.

[@maithilimajage1742]

How many volts battery you connected

[@nishapanchal8702]

Jo 1 project h agar isme 50 lights lgani hai to isme konsa transistor, diode etc. Lgega

[@saritasahu1649]

47k ki jagah 100k ka rasistence use kar sakte hain yaa nahi

[@tukangrame]

be careful for number 1 because it looks like there is a large voltage. for display it is rather dangerous out of reach of children

[@347573]

How is working the #3?

[@mitulkhan6943]

Excellent work

[@garipsmile]

❤❤❤ #smailcrazyindia

[@electrictechnicals]

Amazing

[@YantoKriwilMiri]

Thanks for the tutorial

[@vdsmade]

super ideas👽👍

[@chinmoybagdi5447]

1st project tai ami 60pics led jalate chai tahole ki capacitor ki diode r resistance use korbo . Please ektu bole deben.

[@altairazevedo166]

Boa tarde tudo bem? Como ligo 8 leds verde em uma duas baterias q se torna em 24v?

[@PROkillC]

02:02, isn't it a bridge rectifier? 😁

[@Scubado199]

NO!

[@saericreative9139]

Josssssssssss. Mas bro

[@gregmantalaba3610]

Good job sir

[@АндрейОвчинников-ъ1ц]

Прикольно 👍👍👍 ! А что не указали номиналы радио деталей ?🤔 . Диоды ладно понятно , а вот сопротивления какие применяли и емкость конденсаторов ?

[@stefanoroel8038]

Дык виндно в видее Кондёр 25 В 220 микрофарад (могёт эбануть с розетки), Резистер 47 КилоОм

[@НиколайСоркин-ы3п]

@@stefanoroel8038 если учесть,что розетка там скорее всего 110в,то я бы больше резистор для начала ставил

[@BestHakase]

А большой разницы нет какие номиналы использовать, всё равно в процессе помрёшь от электроудара.

[@ВикторФомин-з6н]

25 220 кондер, диод стандарт во всех китай платах

[@ВикторФомин-з6н]

резис смотри маркировку

[@okhamradio]

Good job guys!

[@govindbhaimena7630]

भाई आप तो सब से अलग हो।

[@paularboladura3137]

Use for lighthouse miniature project

[@JitendraKumar-et5gg]

Rejistens kitne Om ki h or cepisotar kitna volteg mF h btaao

[@mandirimotorst5847]

👍👍👍👍👍

[@alexjoon3215]

Well done😊cute

[@apnamultitech786]

I like ur good idea,thanks

[@Engycation]

Very Nice Video Go A Head

[@gopalmaheshwari5998]

Very very nice video

[@surajtillikhede4672]

First project 60K Ohm or capacitor 330 uf 50 se ho skta hai kya

[@kalpanagarghate7379]

Yes

[@khalidfabiaye323]

Please identify the used components. write it somewhere.

[@JKWazTv]

Mashallah Sundar