Top Budget Mechanical Keyboard | MOD 007 (Polycarbonate) Full Review

[@samuelmai172002]

Mine arrived today and it has such a good stock sound and the typing feel is amazing

[@saulgoodman8788]

got mine and just changed the switches to akko lubed jelly blacks and I just lubed the stabs. sounds way better than cs piano imo.

[@TmgtchRyu]

Waiting for this review since you uploaded the initial sound test. #Lason

[@ThockyDocKey]

Lason is real. Avail ata kay rotobox

[@samuelmai172002]

im so glad ive seen that video thank you !!!! im from germany so most of the keyboards are super hard to get for me this one was available for 110 euros if i wouldnt have seen this video i would have gone for the cidoo v65 v2 prebuilt but that would have been 150 euros

[@Jethrospect]

mac/power/win switch is under the CAPS keycap.. Do you leave it ON an in sleep mode when not in use, or you remove the caps keycap everytime to turn the keyboard on/off?

[@naufaltegarrahmani440]

hi !! between cidoo v75 and akko mod 007 which one u choose?

[@jammies701]

Nice review It’s a nice keyboard, but the lack of QMK/VIA/VIAL functionality is pretty bad… I can’t imagine supporting a wired keyboard in 2023 without correct software support. That’s just not a purchase I can support. Pretty weird since the Monsgeek keyboard has it. If they could get off their butts and just support it, this would become an instant top pick in its category

[@ThockyDocKey]

Agree 100%

[@jammies701]

@@ThockyDocKey crazy thing is China version of Monsgeek M1 doesn’t support VIA/QMK/VIAL either, so they just randomly chose to leave off support for it domestically while giving it to international markets

[@coyotex850]

i find that to be less of a deal breaker with 75% up since they already have the keys and functions you need

[@jammies701]

@@coyotex850 of course some people will be fine with what it comes with, and for you, great, I don’t doubt it has what you need, but I use a lot of custom macros that need VIA(L) to set But, the point was more about adhering to open standards, making keyboards more accessible, and not standing for bloat ware/spyware installation on our computers

[@maddugqc6911]

But akko cloud is pretty good its sure its not at the same level for layer but you still can make macro and comand

[@CubicL3]

Hi Doc, really appreciated your candid opinion on this keyboard as always, been waiting for this review video for weeks now 😁 Question: how do the bundled CS Piano switches compare to other popular Akko linear switches such as Cream Yellows?

[@ThockyDocKey]

Its really good. I think i like it as much as the cream yellows. Or maybe the fream yellows are just a level or two better

[@CubicL3]

@@ThockyDocKey that really is promising as I've been liking the cream yellows lately. Cheers and more power to you Doc! 😊

[@charlesalva]

Thanks for reviewing this keyboard! Is it easy to open the case? Does it use screw or plastic clip mechanism? Do you also use tape mod?

[@ThockyDocKey]

Screw

[@rhythmkeebs]

Libre na po ba yung Fr4 plate? I've been waiting for this review for a very long time since wala talga ako masyuadong nakiktia dito sa yt! Thank you for your thoughts ThockyDocKey. Finalkey v65 naman po sunodddd

[@ThockyDocKey]

Hindi po. Sa monsgeekm1 fr4 plate gamit ko. Pero mas gusto ko na ung kasama na PC plate

[@rhythmkeebs]

@@ThockyDocKey woahh kasya lang pala siya

[@ThockyDocKey]

@@rhythmkeebs yeps

[@TheKomucit]

Hi Doc, is the pcb works for mod 007 v1 or 007 v2 ? since this pc ver using the same series mod 007

[@harriesandaya2020]

does PCB of 007 have the same layout on the monsgeek m1 PCB? I'm planning to buy a monsgeek m1 and switch the PCB on my mod 007 v2 in order to get the VIA compatibility. I also note that mosgeek and 007 have the same 1.2mm PCB.

[@ThockyDocKey]

Same plate. I used my M1 plate on my last soundtest in this video

[@natimiller6974]

What is the size of the spacebar enter and shift? Thx trying to get a keycap set for this

[@ThockyDocKey]

spacebar 6.25 shift 1.75 right

[@natimiller6974]

​@@ThockyDocKey thx so much just subed

[@blees1ng]

Sorry im beginner for this hobby, can you add additional PE foam to this board? I dont quite understand.

[@ThockyDocKey]

it already comes with it's own PE foam

[@edmundovilladelreyiii2444]

Hi doc, do you have any switch review for ktt strawberry? And where did you purchase yours? Thanks in advance for you reply.

[@ThockyDocKey]

Have not done my strawberry review but its an awesome switch. One of my Fav Got mine from keebzilla

[@edmundovilladelreyiii2444]

@@ThockyDocKey oh I’m looking at the same shop haha. I think the 5 pin version is the v2 of ktt strawberry and is using a new mold. It’s a budget long pole linear

[@ThockyDocKey]

@@edmundovilladelreyiii2444 im using the 5 pin version. Not sure if its the new one

[@edmundovilladelreyiii2444]

@@ThockyDocKey how does it compare sound and feel with the jwick blacks?

[@ThockyDocKey]

@@edmundovilladelreyiii2444 this is waay better for my taste Smoother, deeper sound, cleaner sound. Spring weight is superb as well

[@maddugqc6911]

when you forcebreak mod the m1 do you still get hollowness?

[@ThockyDocKey]

Very minimal. Almost not noticeable

[@maddugqc6911]

compared to the M1 what is your tough?

[@ThockyDocKey]

My current preference goes to mod007pc. But both are good

[@Babigoldfish]

Does taping some flex cuts work with this one

[@ThockyDocKey]

Hard to tape a per key flex cuts

[@arjaytv1966]

ano po mic na gamit nyo?

[@ThockyDocKey]

Maono au ao4

[@kevincabarangao9002]

Sadly it's out of stock