Top Budget Spot Lock Trolling Motors // BEST BANG FOR BUCK!!

Looking for a Spot Lock Trolling Motor that doesn't break the bank?
In this video, we'll be showing you the best models if you're on a budget!
For Unboxing Videos of these two motors, Click the Links Below
PowerDrive Unboxing / Overview Video:
• Unboxing Minn Kota Pow...
Xi3 Unboxing / Overview Video:
• Unboxing MotorGuide Xi...
To Purchase a I-Pilot Upgrade Kit, Click the Link Below:
trollingmotorparts.com/minn-k...
To Purchase a Pinpoint GPS Upgrade Kit, Click the Link Below:
trollingmotorparts.com/motor-...
Check out our channel for other Quick Tips, Repairs and Reviews.
Thanks for Watching!
If this video was helpful, remember to give it a like and please consider subscribing!
**New videos coming soon on other repairs, maintenance and tips**
Website: trollingmotorparts.com/
Disclaimer:
Due to factors beyond the control of TrollingMotorParts.com,
We cannot guarantee against improper use or unauthorized modifications of this information. TrollingMotorParts.com assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. TrollingMotorParts.com recommends safe practices when working on motors, boats, wiring and or with tools seen or implied in this video. Due to factors beyond the control of TrollingMotorParts.com, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result.
All do-it-yourself projects entail some risk, it is the sole responsibility of the viewer to assume this risk.
Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TrollingMotorParts.com.

[@edwinchan19590125]

Thanks Bob, love your videos!

[@beardenstephen1]

Great info ... Thanks much !

[@fatfreddyscat5173]

Thanks much for the straight forward, no BS vid.. d:^)

[@slabbusterrtr7690]

Like the vid no BS blah blah straight to the point on the routes we can go 👍

[@PetClipdog]

Thank you, for you Video!!!

[@Anthony-du3he]

Thanks!

[@codysalzer]

I thought you said low budget? 😂

[@officialWWM]

He said “budget”, not “low budget” 😂

[@stephboeker7835]

Thanks for sharing. Liked the video and also sub'd. I recently finished a restore on my 14/52 or so Alum. "V" bottom 1964 Lone*Star Big Fisherman. I have some pretty low level lakes which make my launches less than convenient b'c of the height of the peer & launching the boat by myself. 1st, let me say, I'm really ignorant about motor boating or fishing from a boat. I grew up a fine fisherman from the bank or from the hull of my small sailboat. Now I'm old & retired so nothing is like it was back in the 70's , which brings me to my questions about the new trolling motors available today. I understand the idea of "Spot Lock" now and have seen other features available throughout my research. I'm looking for your suggestion about 2 or 3 TM's that might work for me on a budget. Since this video mostly talks about Spot Lock, I don't know if either motors featured would qualify for my circumstances ? Features : a) Transom Mount (for the bow) b) Spot lock c) remote navigation or pilot - being able to position or drive the boat from the bank w/remote or phone. (android phone) d) works off 12v system (hp /thrust available ?) works off 24v sys (hp /thrust available ?) e) brushless motor Thank you for your generous consideration, Sincerely ................. God bless.

[@MrMichaelDodd]

Thx - Very helpful. Curious if you looked at the Pro Nav Unit that hooks on to a trolling motor or any of the off-brand Chinese companies?

[@Glennmc7]

Will a high-thrust transom motor jack knife a 14-foot aluminum boat even if set to the slowest speed, I need the higher trust for my river fishing, but I also need a slow speed for casting and trolling in lakes I just don't want to go airborne.

[@napkinthief22]

Any advice for an overweight larger boat? My idea is to put 2x 36v minnkota. Just wondering if itll work before forking out all my chiclets

[@buckreynolds1779]

I'm gonna purchase the PowerDrive 45# and the micro I Pilot upgrade kit. Whoo hoo !!!

[@PetClipdog]

When can Buy a Brushless Minn Kota Terrova trolling motor 112/ 36

[@anthonydekker153]

is the haswing gps any good?

[@NeilGraham.I.M.F]

Does the trolling motor have its own GPS? Or does it have to be paired with a graph that has GPS capability

[@Jordan_B34]

Can the power drive network to my hummingbird to go along contour lines?

[@jasonstokley7274]

I would recommend spending a couple of extra hundred and upgrading to the Terrova. It comes with the heading sensor that makes the motor more accurate in spotlock.

[@ismaelcastillo1645]

I’ve heard people say this a lot bro but what is a heading sensor ?

[@jasonstokley7274]

The heading sensor is a compass that tells the trolling motor which way your boat is facing.

[@jimjordan5630]

And what about the cost?

[@buckreynolds1779]

What version of Power Drive do you sell on our Website?

[@Jrfeimst2]

Of the two which is more reliable company?

[@ryanharrod1155]

With the xi3 can you hit the spot lock button without a depth finder. Does the motor with gps,spot lock do it all by itself?

[@trollingmotorparts]

Yes, the Xi3 with Pinpoint GPS will spot lock without being hooked to a depth finder.

[@bobbyrobbins9816]

I have very low opinion of Minn Kota. The older Evinrude TMs ruled.

[@xongxiong8956]

Autoboat!

[@707fishing]

facebook market place yall they around for 1000-2000

[@pointblankokc]

The Minn Kota Powerdrive is junk. I've been running one for 2 years. Factory "spot lock" does not work as advertised.

[@riverpirate1022]

Trolling motors are worse than boats for being a massive rip-off. They cost exponentially more than they cost to produce. The minn kota feature filled models break and fail constantly but their spotlock is the most precise. Motorguide is better but their spot lock sucks and wanders way too much. Regardless neither makes enough 24v short shaft models! Short as in under 54in.

[@Hmmmppffff]

All wrong. Correct answer is "Anchor"