Top DJI Mavic Air 2 Accessories you will actually use

[@dudeandhisdrones]

Battery pin protectors have been added! www.misschrisyco.com/listing/823386773/dji-mavic-air-2-battery-pin-protectors

[@yk.manikantamani6337]

Thanks and Please do add gopro style mount for mavic air 2 looking forward to it 😍.

[@dudeandhisdrones]

This will take some time as I need to finish design and thoroughly testing it, I don't want to be responsible for the loss of a drone or expensive accessory someone mounted to their drone.

[@johnnduncan3943]

Been trying to order but not wanting to process PayPal payment 😒 first world problems

[@jampar3010]

I wish you were in Australia so I could buy pretty much everything haha

[@mattboevers6979]

Cost of the strobe lights I really like them thanks Matt

[@YoungBlaze]

3:46 that screen saver tho

[@gareth5000]

I noticed that too:)

[@leonardofogo]

Hahahaha... soo funny! He just turned upside down like, OPS 🙊

[@spcyamada808]

It was just a picture of a yummy peach.

[@Tetraheedron]

My eyes gravitated towards da booty.

[@shemediang]

3:45 you mean

[@andrewut7ya511]

Charge up the battery different the first time.?! This is why i watch these videos. What an obscure yet valuable bit of information. Im new to flying, about 2 months and ive watched 1000 videos to try to learn as much as i can and ive never heard that. Im buying a mavic 2 after i fly my current drone out over a mile and back ,i want to prove my skills to myself before i get a great drone. slow and steady learning for me lol.

[@dudeandhisdrones]

Thanks for that, I'm glad I could help you out

[@andrewut7ya511]

@@dudeandhisdronesits the little things that are the most helpful, basics come with time in the air, details are usually learned from mistakes, thanks to you i can spare myself some mistake learning.

[@nutro9331]

We need an emergency landing parachute on it, it would be amazing

[@veliksami]

Already available on Amazon

[@FamJammersFilm]

Thats an amazing idea

[@elontusk8018]

It doesn’t fall out of the sky when it emergency lands. It slowly descends. Completely useless.

[@KittyCow]

Or floats, incase it descends on water lol

[@CineZoneYT]

Nutro it would get blown away

[@photoguy1313]

Prop holders look great - looking forward to you producing them!

[@vantagepointvideotexas]

I bought the tablet extender from you. Works great for the Air 2. Then tried it on the Mini 2. Perfect again. Just ordered one for a friend. It's great that the tablet no longer covers the controller. Great idea!

[@dudeandhisdrones]

Great to hear!

[@MYJ61]

Your printed and designed accessories are very well thought out and designed, I think you should start marketing them! Super impressed!

[@13lessins]

Great video this Thursday I'm ordering head lights Can u make attachments for the mavic mini?

[@icerook1560]

That mount is a game changer IMO, great design. I can't get over it for some reason lol

[@dudeandhisdrones]

With a recommendation from one of you guys I was able to modify the iPad mounts to accommodate a case, also the iPad mini mounts will now fit all versions of the iPad mini and now accommodate nearly all cases, even a Otterbox Defender.

[@stevengordon709]

where can I buy your ma 2 iPad mini adapter? with case if possible.

[@amycates1929]

Where do I purchase the iPad mount?

[@greysky65]

I have got to get one of those mini iPad mounts !!!!!

[@dudeandhisdrones]

misschrisyco.com

[@adriancuneo6299]

Great 3d models and great phone wallpaper! 😂

[@adriancozumel2022]

Hello. Im interested in the Gopro style mount. As well as the kit of white light and mounts. Got any more info?

[@frankdogg75]

That lock screen tho.....👍🏽

[@michaelbill8214]

One of the Best parts of this video is your phones background!

[@kenlwray]

Hi. Great video. Can the strobes be mounted in a downward position?

[@stevenmichael7004]

Very cool tablet mount design, with much less accessory weight on the antenna arms.

[@PennsylvaniaDualSport]

Just ordered the Air 2 full kit today. Put you on my shopping list. Thank you

[@dudeandhisdrones]

Awesome! Thank you!

[@EdwinRucci]

at 3:45 LMAO

[@dudeandhisdrones]

If you watched my live stream today on Facebook you got to see the real thing.

[@YoungBlaze]

Dang missed it

[@felixperez8091]

As far as the Prop holders .... a 5 cent wide rubber band does the trick fine.

[@Hammerback0]

I got an aftermarket hard case, similar to a pelican case, with precut foam, very dense, well built case, for around 40 bucks, and like it much better than fly more case

[@RichardBascom77]

Very helpful video - I am curious if you know if the IPad Mini Mount will work on a Samsung Tab S6 Tablet ? Dimensions seem close - but I wanted to check to conform: the dimensions of my tablet are: 244.5 x 159.5 x 5.7 mm (9.63 x 6.28 x 0.22 in - What I really like about your holder is that it seems so streamlined - let me know your thoughts and thanks again for the tips.

[@Davidadventures]

Agreed. We need more Android.

[@andrewvazquez1970]

Hi, allow me to introduce myself, I’m Andrew. I seen your video, like the info and have a question. You mentioned that you know people who can 3D print parts for the Mavic Air 2, so I wanted to see if you can get a red filter made, for me, to fit the Mavic Air 2?

[@camazar1]

You got some awesome products! I just ordered the mount for the 9.7 inch iPad! Going to be buying lots of your products!

[@dudeandhisdrones]

Awesome! Thank you!

[@bencerise984]

Just ordered prop holders, top & front light mounts. Looking forward to trying them out.

[@RocketSkates99]

Hi, do you make an android phone mount so the phone can angle?

[@hansmeyer1270]

Will the strobe mounts attach to the rear legs? If not, any chance of making some that do?

[@LorenzoHines.]

Would love to buy those propeller holders! Showed this to a friend of mine and he said the same. Can't wait!

[@Justifiedforce]

i would purchase a set also

[@_Vladyslav_]

And me

[@Broker_Dre]

Me too

[@dudeandhisdrones]

They are out!

[@Justifiedforce]

Dude and his Drones I just ordered a set of the gray ones from you.

[@icerook1560]

You are forgetting the longer Lighting to Type C connector, these can be tricky, some suck and some are great. Great video though, I like the mount you made, thats super simple and really nice. You said it will fit an ipad 9.7"? Very cool, need that extra cable though...

[@kvedwards1971]

Nice screen saver on your phone

[@ianbarnes3693]

How much for all the 3D printed components ,for all lights ,go pro adapter ,the storage box and the 10 inch iPad holder delivered to the uk

[@detlyn]

Love the lanyard mount! I was really missing this after my phantom 4 pro had one. Thank you.

[@dudeandhisdrones]

Glad it was helpful!

[@FLYGUYMERRILL]

Good tutorial....have you made a top mount for the firehouse arc v

[@claudioborquez3394]

Great work when will you have the prop holders and the holder for the bottom and top light? Thank you

[@dudeandhisdrones]

Top holder is done and the prop holders will be released today.

[@aubergm3p583]

That screen saver lmfao

[@Yelloyote]

When can we get the led holders for the attitude n altitude? Those on the arms visible from side n above.

[@mikebrady4335]

Would like to have access to the prop box. Maybe add a lid to it.

[@kenkozak]

Thanks for creating these, just ordered the prop holders and battery guards.

[@LennyKay]

Wow! Nice work my friend 😎👍 Keep it up and stay safe 😷🤟🏻 Fly safe

[@gerardvautier4311]

Hello, thank you to show us accessories for mavic air 2. I would like to know on what site you have find the system with the leds, I'm french man and I don't arrive to find the system. Thank you for your answer. Excuse my english, I don't use it from a long time

[@dudeandhisdrones]

It's in the description, there are links to the websites, but I would search for Firehouse Technology's Dual and ARC LEDs on Ebay, Amazon and such.

[@BeKindv2024]

you fully guide the features of the mavic air 2, I just bought it but dare not use it. Thank you very much

[@frankward67]

Great looking products. Do you make the top battery mount for the anti collision light for the Mavic 2 Pro?

[@dudeandhisdrones]

It's not something we have for sale but it's something we can do.

[@kingazza12311]

Would you consider shipping around the world?

[@terryshrives8322]

Sweet, I'm getting the strobes

[@josabee6612]

did not hear about battery problems after 1 week. charged them all at once with the brick. no problem :)

[@dudeandhisdrones]

Great news! It's only effecting a small segment, it's mostly just an overabundance of caution.

[@dcounce44]

I did the same without issue, thank goodness.

[@AerialImg]

This high brightness 1000 nit tablet seems to be the perfect companion to fly the Mavic Air 2 @t . I will love to see a review of this tablet. It is also available in Amazon.

[@MichaelToub]

Great info, thanks!

[@RonBoger]

The GoPro Mount sounds good. I would pop my Insta360 One X in it. The Mini was to light to fly with the One X but the Air 2 should be ok.

[@dudeandhisdrones]

I was thinking this was the only really acceptable application, a regular go pro up there doesn't make much sense. I need to play with it some more to make sure it's secure.

[@tommydaynjer5334]

Could I request you develop a mount to hold a super bright cube light such as a lume cube? I see them only on larger drones but if this drone can handle a GoPro it can handle a cube light!

[@stevewaller6303]

Great looking products. I just ordered the iPad Mini/iPad 9.7” custom 3D printed mount!

[@dudeandhisdrones]

Hope you enjoy it!

[@stevewaller6303]

@@dudeandhisdrones I hope to soon, but it will probably be later due to "CODE: 30135 Aircraft processor chip overheating. Power off aircraft and wait for temperature to return to normal." My long awaited Mavic Air 2 appears to have a defective fan. Now I must try to get it replaced. BUT... eventually I will try your product and let you know what I think. Very...very...VERY impatiently waiting!

[@dudeandhisdrones]

That’s the worst!

[@BillCoSmith]

What about large wide rubber bands to hold the props

[@johnkraus8901]

I would like to buy the iPad mount but you don’t ship to Australia

[@cameratechnologycambodia2751]

Nice equipment video sharing!!!

[@dudeandhisdrones]

Thanks 👍

[@alex.tabusca]

Will the tablet holder work for an iPad Pro 11"? I really like your solution and I'd like to buy one if if works

[@aamarbdr5192]

I rechecked 10 times that title and your video coz whole time you were saying "Mavic Mini"

[@robertc9256]

I was looking to get one of the mini iPad holders but right now they seem to be out of stock. I saw where someone mentioned reducing the angle some. Any idea when they will be back in stock? Thanks

[@Simon-qy7pe]

Great information, thanks for sharing. Just want to point out your voice audio level in the video is low

[@vince-jn6mk]

very interested on the Gopro mount

[@dudeandhisdrones]

I'll be releasing the next wave of accessories soon hopefully, we had a hiccup with production and are trying to catch up.

[@kayjet64]

When will the 9.7 ipad pro mount be available. Got my finger on the add to cart button.

[@stevefisher5221]

I would like to see a 3d print for mavic air 2 that would allow insta360 onex camera to be mounted below the drone. 360 image are amazing from up high.

[@dansvideo45]

Nice video! Thanks for sharing!!

[@PhillyDroneLife]

great job man yahoopooooooooooooo

[@dancwilliams]

Great stuff! Thanks!

[@Cameron-sd4zo]

Could you make a gopro mount that attaches to the bottom?

[@n8sartain1]

Great vid, lots of value here!

[@dudeandhisdrones]

Glad to hear it!

[@mattboevers6979]

How much are your strobe lights u show on your drones thanks

[@2ndamendment2death72]

Help me out here please so I used to have a phantom 3 plus and now I looking at dji fpv and air 2s leaning more to air 2s should I get smart remote package

[@Stevieboyfpv]

really like your designs! do the night lights being on the front not glare or effect filming? on the back arms facing forwards??

[@dudeandhisdrones]

The lights do not affect filming.

[@Stevieboyfpv]

@@dudeandhisdrones excellent!great job!

[@DJIBob]

I'm interested in the I pad mini bracket & Strap Clip. I have a 3d printer to make it or I will buy one from you. So do you sell the part or the share the 3d file?

[@henrybroadway]

Do you make similar accessories for the Mini2 ?

[@fj1100mark]

Is there an adapter to fit the 12.9 inch iPad Pro?

[@rickyc3020]

Do the prop holders work for air 2 and and 2s?

[@AntonyCoast]

Precious accessories, well done!!!

[@dudeandhisdrones]

Thank you! 😊

[@robertgross1345]

Great video! I'm new to the drone world and just got my Mavic Air 2. Quick question - what scenario would it be necessary to decharge a battery? Thanks!

[@dudeandhisdrones]

So lithium polymers like the Mavic air 2 don’t like to stay fully charged in storage, the intelligent batteries actually discharge themselves down to storage voltage when you don’t use them.

[@robertgross1345]

@@dudeandhisdrones Interesting. Thanks a lot! Looking forward to more videos from ya!

[@sjnarron]

When will the prop holders be available?

[@CineZoneYT]

I think it’s better that it charges the one that is quickest to charge because it gets you flying quicker

[@SupremeRC]

I would like to get the strobe mounts for the front and the back. I looked at the link and it shows two comes with one so what I ordered two kits to get for that would work front and back?

[@michalmcclure708]

Thanks for the excellent video. I have an iPad Air 2. Will your attachment work for this iPad on the Mavic Air 2? If so, how can I purchase this attachment?

[@dudeandhisdrones]

Yes it will, links in the description!

[@ianfreeman1373]

Interested in the prop holders

[@christophermorris7616]

Your 3D printed led light leg mounts. Can they be mounted to point straight down. If not do you plan on making one. Thanks

[@dudeandhisdrones]

They cannot be mounted downward, and I did not make plans to do that. What application would that be for?

[@GaryOutdoorsLiving]

Nice video! 😀 👍.. Liked and Subscribed!! I love our Mavic Air 2.

[@johndodson3784]

I was wondering, I live in Alaska Southeast. Water is everywhere and a crash landing in water is very likely. Could you 3D Print and set of Pontoons for the Mavic Air 2...? Something that even in a crash would float. DJI will replace if you can retrieve the drone....not if it sinks....and being able to land on the water would be worth a lot to me here. Thanks I loved your video. Just have to figure out where to purchase items from you....website, contact info, that sort of thing....

[@WillBlacksilver]

11:25 TBH I thought he was going to suggest a TV Remote control holder, so you don't have to leave your couch, but just use a drone! XD

[@fredmarino3292]

I think making a bicycles handlebar holder for the controller for while riding and have access and also still being able to see the drone footage while riding

[@danperlea5034]

Just bought the mounts for the strobes from your site. And I got the white strobe from Amazon. However, looks like the green is not available. Any idea of another source for these?

[@dudeandhisdrones]

Check eBay and Firehouse's website

[@ginsterm4528]

Interested in a mount for the strobe light but do not want the leg mounted. Looking for the top mounting bracket. Also looking for the prop protectors. Thank you in advance

[@dudeandhisdrones]

You can find the strobe light mount at the link, prop protectors are in progress still. www.etsy.com/listing/797815972/dji-mavic-air-2-top-mount-anti-collision

[@dubaigeek1988]

Very useful gear

[@Superboy13th]

I previously purchased front/back leg mounts from you for the Mavic Mini - I would like to purchase front/back mounts for the Air 2 as well...can you also print the mounts for the back please? EDIT: Also...kindly link the Rick and Morty key strap lol

[@AlphasAnthelion]

I tried to place an order but Chrisy tells me your are not shipping to Switzerland.

[@dudeandhisdrones]

Since the pandemic started she had too many lost packages or late deliveries that was not optimal for customers or her mental health.

[@TheAngryWexican.]

Nice screensaver on the phone haha

[@zachs.6994]

Hi Dude, great content! What about mounts for LumeCubes?

[@stillsandvideo]

Some great items and suggestions -- thank you. Any idea when the iPad Mini mount will be back in stock?

[@audreysax]

I have a firehouse arc V strobe light. Do you make a holder for that for Mavic Air 2?

[@dudeandhisdrones]

Not yet, may make one in the future, there are other people on ebay and etsy that do make them.

[@Geekchica]

Great content. Thank you. Please make available for purchase the prop holders, LED light holders: top, port, and starboard, and GoPro holder for top. Thank you.

[@nikserdar]

3:10 nice holder man. Is there any way to send sketch of it?

[@pnwoutdoorlife2720]

I really want that part you made to use an iPad. Is that for sale.

[@sstteevveenn77]

I have had people tell me the HUB charges all the batteries simultaneously. But just like you mentioned, others have said it charges in sequence. Can you provide a link to this info? I've been looking everywhere but cannot find any details on what is true. Awesome vid btw!

[@D-OveRMinD]

I've got this drone and can confirm, only one at a time.

[@Gave-rf1hr]

Mine does ome at a time , first time I hooked them up I tought something was wrong .

[@take2studio187]

I would buy some prop guards if you printed some up

[@irvinejamesforbes522]

Hi I live in the uk could I get the holder for my iPad mini 2 if so how much would it cost. Regards Irvine

[@frankbenavidez1]

Random question but would you be able to help find a backpack to carry the mavic air 2 and hero 8 gopro with accessories.

[@龙源探索]

Hello and very impressed with your products. I think your designs are far more aesthetically appealing than what I have seen so far. Simple, applicable and just want is needed. The Mavic Air 2 will be my first drone and should be in my hands in two days, hopefully. Very much looking forward to this new adventure. All questions are regarding a DJI Mavic Air 2. Question for you as I am planning to order a set of the light mounts. First, can not find a link to the upper light mount. Is this a oversight or just not available at this time? Second, the light mounts are for the L/H and R/H forward arms. You show the LED light as Firehouse in your Amazon link but at this time they are sold out. The Firehouse LED lights that fit in your light mounts are Firehouse "ARC" strobe LED's? listed in the Firehouse site? Yes, would buy the upper strobe LED light mount for the DJI Mavic Air 2 when available. Yes, would buy the prop covers/protectors for the DJI Mavic Air 2 when available.

[@龙源探索]

My mistake for not reading everything thoroughly, is for the Firehouse "Dual" strobe lights.

[@龙源探索]

Answered my second question. When seeing all of the items you have for sale in Etsy, the upper LED mount is shown with all of your items for sale. Ordered the entire light mount set and looking forward to attaching your products to my drone.