this is a great looking sifter and you did a great job exsplaining this thing . i'm looking for the next video. thank you for showing!
@jscm37386 жыл бұрын
I think the tensioner pulley needs to be on the on the other (relaxed) side of the engine pulley.
@lendoggy27 жыл бұрын
Finally! Someone who understands that making a video about a shaker knows that you need to show clearly how it works. Thanks.
@kevingates52265 жыл бұрын
works??
@NaughtyGoatFarmАй бұрын
Good job. Why the wheels at the front? Would a hinge/pivot do the same job?
@clarkhuffman197527 күн бұрын
Yes, a hinge or pivot point would work as well. My brother came up with the design and he had the wheels sitting around so he decided to use them. Honestly, I didn't give that aspect of the design much thought.
@billcoley85205 жыл бұрын
That is a wonderful look, I’m wondering if you could Mae it where it had 3 racks, top rack everything falls through except 3in rocks and larger. 2nd level would shed the next desired, 1 inch and large rocks, . 3rd rack would allow everything left except 1/2 inch rocks. Also it’s to steep. 15% max.... give material time to shed as much as possible.... you can also have 3 different sautés. 3 inch and larger straight out. 2nd Shute to the left. And lower level to the right.. separating the material beautiful... Everything else falls to the center... .. My only other concern is the belt rattling so much, the tension is to flimsy, just my opinion...
@seankelly3535 жыл бұрын
GREAT JOB !! I just recently built one , but it has no shaker. Now I see the simplicity of it. Such a simple machine, but vital when your in the dirt business! Thanks again for sharing!!
@jonathanwillard6634 жыл бұрын
Build the screen deck. Set it on springs. Take a rear truck axle with rims on it (no tires). take 3 or 4 inch diameter pipe and cut it in half, making 1.5 inch or 2 inch half circles. Weld those to the rims that are still mounted to the axle and differential. Weld 6, 7, 8, or 10 of them to the rim so when it spins they would bounce a ball up and down if you could keep it on top of the rim. Mount 2 rims with tires on them to the shaker deck, both on axles. Line them up so they're touching the rims on the truck axle with. Sooo, when you hookup the differential to a motor, the motor spins the differential yolk, which spins the bare rims, which spin the tires mounted to the screen deck. There you have a deck that vibrates when those rims spin and every time the half circles hit the tires on the deck, the screen bounces. There's no belt to break, no counterweight, no "special bearings" to replace when they go bad, and heavy duty bearings made for trucks and trailors.
@jp1850g2 жыл бұрын
Have you seen any videos of this or done this?
@BrettsBuilds10 ай бұрын
Where did you get the counter weights and bearings?
@clarkhuffman197510 ай бұрын
We picked up the pillow bushings from TSC if I recall. Nothing exotic. However, my brother is a machinist and made the counterweight.
@petemiller5194 жыл бұрын
Nice job! I think you may need to add couple of angle supports under the screen. Looks like the screen is spanning a fair distance and will fail over time due to soil weight.
@georgedistel12032 жыл бұрын
Thats what I was thinking myself, I started screening flower beds that had several layers of rock in them by hand last year. I had to add bracing because I kept damaging my screen shaking by hand, actually was putting in too much dirt at a time. Mine was made from 1×1 wood. Worked this 65 year old to death. Started watching videos now I'm going to build a powered one to save my back and shoulders. But like my dad once said boy get yer ass out there and get those rocks outta that dirt.
@bosdad75 жыл бұрын
Nice build, one mistake. you needed to put a cover over the counter weights. otherwise it will throw dirt back at you and all over the place as it is hit by the falling dirt. quick fix and you'll have a nice and safe machine.
@jun300ex5 жыл бұрын
If you put both counter weight to the same direction it will shake more
@RCracingFun2 жыл бұрын
RENT That looks absolutely awesome!!!! Great job!!!! I'm sure it's a long shot, ever thought about renting that thing out? What state are you using it in now? I heard you say Ohio built with plans for Florida?
@joejoe17384 жыл бұрын
Very well made man thank you for the idea
@JustinVManes4 ай бұрын
Best!
@bigjim57237 жыл бұрын
thanks-u have made my day. wanting to build of these for a yr now. the time has come-and i was between a small grizzly or one like u have down. very simple design. was gonna aask u the pitch of screen but u also talked about that. am going to ur channel to see if u have posted any more videos of it. thanks again.
@優さん-n7m Жыл бұрын
it would be great to show this in action too you know
@maverickgood52042 жыл бұрын
This is excellent. Where can I buy one? :)
@larrywhite65369 ай бұрын
Where did you find the large pulleys
@clarkhuffman19759 ай бұрын
I honestly can't remember but TSC or Rural King may have them.
@johnnybegood92856 ай бұрын
I was thinking a pulley off of a cement mixer could/would work although I think those are single belt pulleys?
@miscellaneous52683 жыл бұрын
Counterweights will destroy your bearings in no time ...
@funnytilltheresblood4 жыл бұрын
Are the steel castors transferring vibration?. I thought the idea was that they were to be rubber?
@giuseppetrofa33162 жыл бұрын
Dove si può acquistare
@LAKESIDEBOB17 жыл бұрын
Looks very good, waiting to see a video of in in the gravel. Thank you
@robertweekley59267 жыл бұрын
LAKESIDEBOB1 - Just looking at this, I see quite a few open rotary parts, great for causing personal damage, injury. Some 1/2" Construction Cloth Wire Mesh Shield, should not be too Expensive to Create and add, to keep fingers, hair, etc. out of those moving parts. Even the 1/4" type, for even better protection! That would also protect belts and drives from rocks causing a thrown belt, etc. Otherwise, it seems to be a good start. Keep at it!
@SamCyrMega4 жыл бұрын
Most dangerous thing ever hahah XD
@asseroflove86896 жыл бұрын
Good job
@scottfry94665 жыл бұрын
How'd this work out?
@clarkhuffman19755 жыл бұрын
It works well in sandy soil. However, it in clay it is a different story. For clay you will need someone with a rake to help sift the soil.
@scottfry94665 жыл бұрын
@@clarkhuffman1975 thanks for the update. Im thinking about making one. Anything you'd change?
@clarkhuffman19755 жыл бұрын
@@scottfry9466 I would probably put a shield over the engine to keep the dirt out of the engine.