Torch applying bituminous sheet waterproofing service in

bitumen membrane 2mm polyester fabric sheet laying waterproofing work in Chennai chrompet tamilnadu
client name : mr.manoj
work start 21-06-24
work finish 21-06-24
5 year's warranty for bitumen membrane
3 years warranty for aluminium foil coating
bharath civil care 8754684833
Application process
Before applying APP waterproofing, it is necessary to ensure that the surface is free of any oils or chemicals. It is recommended to use a primer on the application surface. A welding torch is used to maintain 10 cm overtopping for joints and 15 cm overtopping for ends.
With a trowel, the mineral stone that coats the surface on joints is heated and the minerals are buried into the bituminous surface before the joints are welded together
Membrane installation starts from the lowest point of the slope and progresses to the highest point.
The substrate and underside are torched.
When the shiny bitumen surface is exposed after the underside heating of the membrane, the membrane is rolled forward. The membrane is pressed firmly against the substrate for superior bonding.
Once the torching process of the membrane starts, it shouldn’t be lifted or shifted.
The overlaps are then pressed into the seam with a trowel. While maintaining the side and end overlaps, a round tip trowel is used to smoothen the bitumen produced at the seams.
Special care should be taken to seal angles and abutments. The last step is to seal the edges
விண்ணப்ப செயல்முறை
APP நீர்ப்புகாப்பைப் பயன்படுத்துவதற்கு முன், மேற்பரப்பு எந்த எண்ணெய்கள் அல்லது இரசாயனங்கள் இல்லாமல் இருப்பதை உறுதி செய்வது அவசியம். பயன்பாட்டு மேற்பரப்பில் ஒரு ப்ரைமரைப் பயன்படுத்த பரிந்துரைக்கப்படுகிறது
thank you all

[@MrCooloke]

Square feet how much bro ......your service available in Veppampattu

[@BHARATHCIVILCARE]

2mm sheet 60sft 3mm sheet 65sft

[@MrCooloke]

@@BHARATHCIVILCARE Thanks bro.....I will reach you soon