Torqstorm troubleshooting(LOW BOOST) on a 5th gen Camaro. We found the fix and make great numbers.

[@jbeezy13131]

Thank you again! Couldn’t be more happier with the car. These are great guys and great to work with!

[@nufnuffz28]

Thank you sir!

[@p_934]

Hows the kit been working for you thus far?

[@baby-sharkgto4902]

Nice work guys

[@nufnuffz28]

Thanks

[@SuperDSFADSF]

I’m mid install on my 5th gen. A6 fbo and big pd cam. Just finished putting on the ati dampener and pinning the crank

[@nufnuffz28]

PD cam on a centrifugal, hmmm What intercooler?

[@SuperDSFADSF]

@@nufnuffz28 mr bling intercooler aka treadstone

[@nufnuffz28]

@@SuperDSFADSF if it doesn't say treadstone keep an eye on it. Seen Mr Bling ones cause huge boost loss.

[@SuperDSFADSF]

@@nufnuffz28 in case I have any questions

[@jeffneibarger6274]

@@nufnuffz28 all mr bling kits include treadstone intercoolers now

[@GoYoteSlaya]

Anyone with a torqstorm, I highly recommend you don’t void the warranty. I have already had three malfunctions with my blower. Bearing failure 3 times on a 3.1 pulley only revving up to 6400 and leakage. The problem with these blowers is there is no vent relief valve for when it gets hot so it ends up leaking oil Thru the seal and eventually bearing failure.

[@nufnuffz28]

As they start to age they are surely looking to not be aging too well. This one was voided when he dropped it off!

[@GoYoteSlaya]

@@nufnuffz28 I’ve only put about 9k miles on mine so far and it’s about a year old. A lot of others have been having the same issues too.

[@nufnuffz28]

@@GoYoteSlaya that stinks. Are they taking care of the issues so far?

[@GoYoteSlaya]

@@nufnuffz28 yes they have fixed it each time no issues, they have good customer service. I just cant do this for the rest of time taking my supercharger off every 3 months to send to them and wait for 2 weeks to get it back.

[@baby-sharkgto4902]

Are they less expensive than Procharger, is that why people go to Torque Storm? I have been seeing a lot of people purchasing Torque Storm and I’m wondering why they would not have just went Procharger? Me personally nothing against Torque Storm, I am just curious.

[@neitzelm1]

I'm currently installing my torqstorm kit on a 2010 camaro ss with pretty much identical setup as your customer. I have a mishimoto intercooler installed. Have you guys had good luck with those intercoolers?

[@nufnuffz28]

They seem to be pretty good. Your boost will tell the story!

[@DHilliard48]

Good stuff! Nice work!

[@nufnuffz28]

Thank you sir

[@probation2propagation420]

Whats the part number for this intercooler?

[@nufnuffz28]

Sorry. Not sure

[@hondaboih22]

TR1245 -1000Hp

[@domosmash]

🤘🏽🤘🏽🤘🏽

[@nufnuffz28]

Thank you sir

[@credelljackson2317]

The clamp on my blower housing bad it leaked from the blower

[@nufnuffz28]

I've heard that from a few people. Good find

[@issacvillafan5299]

I have a 2010 with a torqstorm currently having white smoke problems don’t know why does anyone have a clue?I have a video of the car and what’s it doing aswell..need some help!!!

[@nufnuffz28]

May be a catch can issue or motor is hurt. Hard to tell from here.

[@the_bald_eagle_machine6559]

stock fuel system? Injectors? I'm getting ready to add a Torqstorm to my 2011 LS3 M6 Camaro and I am going with zl1 fuel pump and 850cc injectors.

[@nufnuffz28]

Stock pump and 85 lb injectors. 93 will be fine this way. E85 will need the zl1 pump to get some more headroom

[@mikehogan5087]

Heat soak issues?

[@nufnuffz28]

Not too bad with the better IC!

[@jplperformance9073]

Wow, the old intercooler was junk

[@nufnuffz28]

HUGE difference

[@trhall75]

I didn’t hear you guys say what belt you switch to in the video . What belt did you guys use ?

[@nufnuffz28]

Sorry. We put it in another video. Went down an inch

[@nikob235]

What cam is in it and very impressive just with intercooler swap

[@nufnuffz28]

Tsp 3 NA LS3 cam

[@waggss24]

Hey guys ive got a 68 c10 with a b15 lsx 376 in it twin torque storms , the issue im having is i make very little boost like 6 pounds until 5000 rpm then like a switch at 5000rpm it makes 18psi instantly, Just curious if you have any ideas on why this might be happening

[@nufnuffz28]

Sounds like the BOV is staying open some until that point to me

[@GOD2FAST]

Could have made that power with a cam & LSA blower with no issue 🤦🏾‍♂️

[@nufnuffz28]

Or a procharger, or a BIG all motor build, or a turbo. You can make power 100 ways, so no reason to worry about what way he did it. No issues now amd pulls great!

[@baby-sharkgto4902]

@@nufnuffz28well said. *Exactly*

[@cantcme1243]

I wuz really close to getting a Torquestorm and my mechanic stopped me immediately and said they're not reliable and are garbage!

[@nufnuffz28]

We have seen decent results for the price, but overapl reliability seems low :(