How to Remove Door Wiring Looms - Audi A4 S4 - B6 B7 - 2001-2008 - TOTAL TECHNIK

This video will show you how to remove the Door Wiring Loom on your Audi A4, S4 or RS4 (B6, B7) 2001-2008.
Looking for tools?
www.totaltechn...
USEFUL LINKS:
1) How to remove your Door Cards:
• How to Remove Door Car...
2) How to remove your Door Speaker:
• How to Remove Door Spe...
Video by TOTAL TECHNIK

[@TotalTechnik]

Looking for tools? www.totaltechnik.com/selectstore

[@geoffpavey4786]

how do you remove the connector in the door crease (where the loom plugs into) mine is corroded

[@pkiv2108]

5:40 most people open wrong way these connectors. You dont need any tools to open these. Twisting with screwdriver you probably damage the connector locking parts. Right way is to push the connectors tighter together, and then press down the narrow part at the end of the connector which release the catch and pull the connectors apart. I haven't needed any tools to open those after I was told how to open them right way.

[@NicholasNicolaides]

What gauge is the speaker wires RS4 B7 2007? Btw, I've been a subscriber for a long time and thinking of donating soon. Your videos are very helpful.

[@wagwan6248]

Hey great video. I’m guessing the battery doesn’t need disconnecting whilst doing this?

[@TotalTechnik]

No you will be fine with most processes. You can always disconnect just the negative battery cable if you want to be doubly safe. --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@pomajzsolt4363]

Very good video thanks. I replaced the front door wiring loom today and now the electric window doesn't go all the way down.Is this possible that the new wiring loom prevent the window going down?Maybe the wiring in wrong place or something 🤔

[@pomajzsolt4363]

Update. That's was the issue all fixed now✌️

[@TotalTechnik]

Awesome!!! Glad you managed to get your car sorted :-) www.paypal.me/totaltechnik

[@danielwells2745]

Where did you get the loom from please any links

[@pomajzsolt4363]

@@danielwells2745 I've got it from Škoda main dealer. Very expensive

[@NicholasNicolaides]

Is there any room to push through a two 10 awg speaker wires?

[@TravisTerrell]

Any clue whether the harness is the same in the B6 and B7 models? Outwardly, it looks like it, but I really don't know. (FWIW: When I look up window switches (something that plugs into it) on ECS, it shows that the B7 one is not compatible with the B6 (and vice-versa). Not sure how accurate this is, though, or whether it is even relevant to the harness.)

[@TotalTechnik]

Hey there! Yes, the physical parts of it are the same between B6 and B7 so this guide applies to both. There may be wiring differences between B6 and B7, but physically the construction is identcial. --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@adamclifford1278]

Thanks.Very useful.Down and dirty which is my ongoing experience.Well broken up.Excellent!

[@marktanswell7812]

Just done this job on my A3 great video and very helpful

[@fr000bify]

hi, on my a3 {57} i had the "door not closed" light on the dash, i decided to replace the door mech with a new one, but i still seem to have the "door not closed" light on the dash, but not as frequent as before replacing the the old mech, do you think i have a broken wire in the door loom? Thanks for great video, +sub

[@TotalTechnik]

Yes, it's a definite possibility. You have have a wire that is in the process of breaking due to constant movement. It's fairly common, but not usually too bad on this platform. Worth a visual inspection for sure. Hope that helps! www.paypal.me/totaltechnik --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@alexlucas4437]

Hi my audi a4 b8 no locking all doors only driver side and passenger side totally not working nothing like mirror settings indicator and no locking what u think what is the problem thank you

[@douglasrussell1231]

Broken Wires inside .........

[@scottylad79]

Just wondering if you know of any videos of removing door loom of a vauxhall insignia 2016 sports tourer estate 2ltr

[@TotalTechnik]

Hey there! Sorry but we don't do any Vauxhall coverage. We are Audi/VW orientated :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@necromecro]

Very informative video. I love total technic

[@TotalTechnik]

Thank you for your support! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@grazianolaudisio3644]

Did you disconnect the battery first? Or is this not necessary?

[@2H2521]

Thanks for this video, I had my truck repainted & these have overspray. I’m taking them off to remove it.

[@davidristic3800]

Awesome video...really helped me navigate through my Audi

[@TotalTechnik]

Excellent! Glad our content is helping :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@mocha4352]

Great video, thank you for the info!

[@andreicazacu85]

Hello! I can't get the couple off the car pillar. you can be more explicit with that safety of the coupling. how exactly is it unlocked? thank you

[@TotalTechnik]

Hey there! Please rewatch the video carefully, there are very detailed instructions there on how to remove the rubber boot. Please rewatch carefully and you will see it is explained and shown in detail there. --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@DynamiX__TV]

Really helpful! Thanks a lot! I can't remove that connector in the chassi, wich the door wire loom is connected to. Is there a video for that as well? Once again, thanks a lot! :)

[@alrestauro]

Very informative removal! Thanks.

[@TotalTechnik]

Much appreciated :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@Prof.Polymath]

Well this video got you a subscribe from me fella. Excellent video, really well narrated and great shots of the clip mechanisms too. Really well done. Thank you. 👍🏼

[@TotalTechnik]

Thank you, we really appreciated your kind comments!! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@bebopnrocksteady9404]

hi i have a problem with my rear door locking on the drivers side but those 2 plugs next to the speaker are not plugged in to anything and i have no socket for the puddle lights to plug in to, am i missing something behind the door card? it has wind up windows if that makes a difference? the actuator has been changed but still not working?

[@bebopnrocksteady9404]

I'd be happy to donate if you could help me out

[@TotalTechnik]

Hey there! Yes, the cabling inside the door card does vary depending upon the options you have on the car, so that part sounds normal. Does it fail to lock or unlock, or both? --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@bebopnrocksteady9404]

ive swapped the door loom out so now the car thinks the door is open on the display and the under seat light stays on but the door still doesn't lock or unlock and the puddle lights dont come on either?

[@TotalTechnik]

Ok, so to clarify did you have an issue before changing the door card loom? And was it the door card loom or the door loom you changed? Or both?? --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@bebopnrocksteady9404]

hi the door didn't lock but it had a door loom off a car with electric windows in so I've changed it to the correct loom for one with manual windows, know it still doesn't lock or unlock but the car things the door open all the time, its had a new door actuator but in also!

[@crazyone4carzngunz]

Great Job 👍

This is awesome, thank you

[@TotalTechnik]

Glad you found our video helpful :-) www.paypal.me/totaltechnik --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@iiMarf]

Very helpful!

[@TotalTechnik]

Thank you! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@bgfrdqf44]

Thank you sir!

[@TotalTechnik]

You are most welcome! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@jordanloveuk]

My pink door plug won’t come off how do I do it?

[@TotalTechnik]

Hey there! Please rewatch the video carefully, it is explained is good detail exactly how each component works and how to unplug it. Unless someone has glued something in, you should be able to remove it using the tips in the video :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@chassis66]

Perfecto.

[@TotalTechnik]

Much appreciated!! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!