Toyota 22RE timing chain How To, Easy.

[@SANTACRUZKITESURFING]

Unlike in this video, always put the motor at top dead center, before removing the chain. Do not remove the Woodruff key from the crank ever, unless it is damaged and needs to be replaced. This way the motor always stays in time and replacing the chain is easily done, without bending any valves when you rotate the motor out of time.

[@aerialrescuesolutions3277]

Well said Alex.

[@jamesmcilroy8811]

He didn't even install a new or the old Woodruff key. Glad I read this Comment.

[@SoybeanFarmer3300]

Thanks Alex there's always some little detail that got left out in these how to videos making them somewhat useless.

[@gageparker4807]

@@jamesmcilroy8811 vjvjvjkvvjvjvjvjvjvjkvvjkvkvkvvjkvkvjkvjkvjkvvkjvjvjvjvjvjvjvjvjvjvjvjvvvjvjkvkvjvkjkvvjkvjvjvjvjvjvjkvkvkvkvjkvkvkvkvjvjvjvkjv oh ivvckjkgkvvjkvkvvjkvkvvkjvjkjvjvjvjvjvkhkvkvjkvjvjvjvjvjvjvjkvkvkvkvjvkkvjvjvjvjvjvjvjvjkvjkvvkjvjkvkvkvkvkvvjvkjvjvjvjvjvjvjvjvjvjvvjkvvjkvjvjvjkvjvjvjkvkvkvkvkvkvkvvkjkvjvjvjkvvcc oh hvhfhghvjvhvjv oh hvhfohoggjvjfhgoggvkhfhogoggjogogjovvvjv

[@jeffsmith9420]

The 22r is not an interferential engine. You wont bend the valves it is out of time.

[@patrickphippspa584]

I LOVED this video. I appreciate the time you guys took and for outlining some of the ways to save time and make things easier. Friendly bunch of guys made this a pleasure to watch. Thanks again fellas! For a moment, I thought from the camera angle that the 22RE was going in the Chevy in the background. I'm gonna have to subscribe to you guys as a result of this video!

[@Captain_Sprockett]

Jeez, great disassembly video, but if someone inexperienced follows this, they're gonna regret it.

[@kennymartin379]

I was hoping you would show this when you put it back in

[@ringwaldolorence8637]

dude you didnt replace the woodruff key is this a joke?

[@petercepeda9145]

Bet this had timing issue when trying to start

[@weeral1]

to say the least

[@elliotschneider5643]

What about the woodruff key

[@randydepew888]

You didn't show how you slid the timing chain cover between the head and oil pan,,, put it back on as easily as you did it off,,,

[@frankmata1812]

I'm sure the oil pan has to come off for the bottom of the cover to seal well with silicone.

[@ourladyofperpetualmotion79]

Thank you

[@jerryriggins123]

do you have to put a dab of rtv on one of the bolt threads that goes through the timing chain cover

[@aerialrescuesolutions3277]

Yes you do, it's the long one that goes through the oil pump.

[@paulregret3180]

How many hours does this take?

[@aerialrescuesolutions3277]

Lots of totally skipped steps here. Informative though. Thank you, Jim

[@johnosullivan6620]

Sorry this is wrong do not use this for assembly!

[@aerialrescuesolutions3277]

Why be sorry? When something ain't right, it just is what it is.

[@larrygranato838]

If the chain breaks on a 22r /re does it bend the valves?

[@frankmata1812]

I'm wondering that also cause I'm working on one and don't want to do all the work for nothing.I think Im going to borrow a stethoscope camera from AutoZone and look through the spark plug hole to see if the piston looks marked.

[@jerryrussell2600]

That timing chain cover came off too easily, probably because it lacked gasket maker paste between the oil pan and the timing chain cover, and between the cylinder head and the timing chain cover.

[@brandoncrowe8993]

All of the people saying this is wrong are absolutely hilarious to me because we literally drove this truck all the way to Las Vegas and back this past winter, with this very engine, and it had absolutely 0 issues lol. Not an interference engine either. And it was pretty much right on the money as far as timing goes. Oh well. If you don’t like it maybe look at the channel name lol. It’s chop it n roll, not “do everything by the book exactly how it should be done” lol. Just wait til y’all see some of the other stuff we do 🤣

[@jameswattenbarger2498]

Except the 22re is an interference engine

[@randydepew888]

Chop an roll , at least you should not roll the pipe before you do this ,,,

[@skylermcclish9396]

Thanks man helped a lot 👍

[@randydepew888]

when you took off the cover,,, I could tell the engine wasn't even on tds,,, you guys,,, remember everyone you have to be nice,,,

[@craigvwdude]

guarantee that motor didn't start without the lower gear keyway..

[@Petunia_Kit]

He knows the prices cause he had to pay for it all...;)

[@Bluecollar780]

Great video!

[@demon9554]

saw this on the back of a truck, presumably yours

[@kaylabailey6683]

Good video man I appreciate it. the assembly was easy to understand … I’m going to comment on the key issue as I see some ppl are whining about it ….. Cmon ppl if you don’t realize one needs to be there or what shape it should be in before replacing it I suggest you stick to bikes and recheck your kids brakes …. Morons 🐔 I bought a timing kit with a metal guard drivers side only also came with a plastic one .. I opted for the metal one and used two oil pan short bolts to bolt the metal guide on .. It never came with the proper bolts …. Good video man

[@michaelcox8702]

Quit steering people in the wrong direct because it's very costly.

[@justsomedude8861]

When’s the next episode coming out?

[@weeral1]

Jesus dude take this down. If you can't do it right don't teach others who don't know any better.

[@scottthorson1]

11:55 not 12:05

[@Berek-e2d]

I think this video is made to deliberately cause viewers grief. There is no reason to remove the Woodriff key. Also he shows removing every bolt on disassembly but skips everything on reassembly including the woodriff key. I would not trust any video from these folks.

[@cdawg9149]

THX.

[@toddpayne9863]

Zv

[@gila-clifffirewood5796]

Man I know you wanted to do something to help people, but you clearly don't know what the hell you're doing.

[@marklance033]

What is your e-mail ?